| RFC 9648 | YANG Data Model for TCP | October 2024 |
| Scharf, et al. | Standards Track | [Page] |
This document specifies a minimal YANG data model for TCP on devices that are configured and managed by network management protocols. The YANG data model defines a container for all TCP connections and groupings of authentication parameters that can be imported and used in TCP implementations or by other models that need to configure TCP parameters. The model also includes basic TCP statistics. The model is compliant with Network Management Datastore Architecture (NMDA) (RFC 8342).¶
This is an Internet Standards Track document.¶
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841.¶
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc9648.¶
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
The Transmission Control Protocol (TCP) [RFC9293] is used by many applications in the Internet, including control and management protocols. As such, TCP is implemented on network elements that can be configured and managed via network management protocols such as Network Configuration Protocol (NETCONF) [RFC6241] or RESTCONF [RFC8040].¶
This document specifies a minimal YANG 1.1 [RFC7950] data model for configuring and managing TCP on network elements that support YANG, a TCP connection table, a TCP listener table containing information about a particular TCP listener, and an augmentation of the YANG data model for key chains [RFC8177] to support authentication. The YANG module specified in this document is compliant with Network Management Datastore Architecture (NMDA) [RFC8342].¶
The YANG module has a narrow scope and focuses on a subset of fundamental TCP functions and basic statistics. It defines a container for a list of TCP connections that includes definitions from "YANG Groupings for TCP Clients and TCP Servers" [RFC9643]. The model adheres to the recommendation in "BGP/MPLS IP Virtual Private Networks (VPNs)" [RFC4364]. Therefore, it allows enabling of TCP Authentication Option (TCP-AO) [RFC5925] and accommodates the installed base that makes use of MD5. The module can be augmented or updated to address more advanced or implementation-specific TCP features in the future.¶
This specification does not deprecate the Management Information Base (MIB) for the Transmission Control Protocol (TCP) [RFC4022]. The basic statistics defined in this document follow the model of the TCP MIB. A TCP extended statistics MIB [RFC4898] is also available, but this document does not cover such extended statistics. The YANG module also omits some selected parameters included in TCP MIB, most notably Retransmission Timeout (RTO) configuration and a maximum connection limit. This is a conscious decision as these parameters hardly matter in a state-of-the-art TCP implementation. It would also be possible to translate a MIB into a YANG module, for instance, using "Translation of Structure of Management Information Version 2 (SMIv2) MIB Modules to YANG Modules" [RFC6643]. However, this approach is not used in this document, because a translated model would not be up-to-date.¶
There are other existing TCP-related YANG data models, which are orthogonal to this specification. Examples are:¶
Various examples in this document use the XML [W3C.REC-xml-20081126] encoding. Other encodings, such as JSON [RFC8259], could alternatively be used.¶
Various examples in this document contain long lines that may be folded, as described in [RFC8792].¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
TCP is implemented on different system architectures. As a result, there are many different and often implementation-specific ways to configure parameters of the TCP engine. In addition, in many TCP/IP stacks, configuration exists for different scopes:¶
As a result, there is no ground truth for setting certain TCP parameters, and generally different TCP implementations have used different modeling approaches. For instance, one implementation may define a given configuration parameter globally, while another one uses per-interface settings, and both approaches work well for the corresponding use cases. Also, different systems may use different default values. In addition, TCP can be implemented in different ways and design choices by the protocol engine often affect configuration options.¶
Nonetheless, a number of TCP stack parameters require configuration by YANG data models. This document therefore defines a minimal YANG data model with fundamental parameters. An important use case is the TCP configuration on network elements, such as routers, which often use YANG data models. The model therefore specifies TCP parameters that are important on such TCP stacks.¶
In particular, this applies to the support of the TCP Authentication Option (TCP-AO) [RFC5925] and the corresponding cryptographic algorithms [RFC5926]. TCP-AO is used on routers to secure routing protocols such as BGP. In that case, a YANG data model for TCP-AO configuration is required. The model defined in this document includes the required parameters for TCP-AO configuration, such as the values of SendID and RecvID. The key chain for TCP-AO can be modeled by the YANG data model for key chains [RFC8177]. The groupings defined in this document can be imported and used as part of such a preconfiguration.¶
Given an installed base, the model also allows enabling of the legacy TCP MD5 [RFC2385] signature option. The TCP MD5 signature option was obsoleted by TCP-AO in 2010. If current implementations require TCP authentication, it is RECOMMENDED to use TCP-AO [RFC5925].¶
Similar to the TCP MIB [RFC4022], this document also specifies basic statistics, a TCP connection list, and a TCP listener list.¶
This allows implementations of TCP MIB [RFC4022] to migrate to the YANG data model defined in this memo. Note that the TCP MIB does not include means to reset statistics, which are defined in this document. This is not a major addition, as a reset can simply be implemented by storing offset values for the counters.¶
This version of the module does not model details of Multipath TCP [RFC8684]. This could be addressed in a later version of this document.¶
The YANG data model defined in this document includes definitions from "YANG Groupings for TCP Clients and TCP Servers" [RFC9643]. Similar to that model, this specification defines YANG groupings. This allows reuse of these groupings in different YANG data models. It is intended that these groupings will be used either standalone or for TCP-based protocols as part of a stack of protocol-specific configuration models. An example could be the one described in "YANG Model for Border Gateway Protocol (BGP-4)" [BGP-MODEL].¶
This section provides an abridged tree diagram for the YANG module defined in this document. Annotations used in the diagram are defined in "YANG Tree Diagrams" [RFC8340]. A complete tree diagram can be found in Appendix B.¶
module: ietf-tcp
+--rw tcp!
+--rw connections
| ...
+--ro tcp-listeners* [type address port]
| ...
+--ro statistics {statistics}?
...
augment /key-chain:key-chains/key-chain:key-chain/key-chain:key:
+--rw authentication {authentication}?
+--rw keychain? key-chain:key-chain-ref
+--rw (authentication)?
...
¶
This YANG module references "The TCP Authentication Option" [RFC5925], "Protection of BGP Sessions via the TCP MD5 Signature Option" [RFC2385], and "Transmission Control Protocol (TCP)" [RFC9293] and imports "Common YANG Data Types" [RFC6991], "Network Configuration Access Control Model" [RFC8341], and "YANG Groupings for TCP Clients and TCP Servers" [RFC9643].¶
<CODE BEGINS> file "ietf-tcp@2024-10-10.yang"
module ietf-tcp {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-tcp";
prefix tcp;
import ietf-yang-types {
prefix yang;
reference
"RFC 6991: Common YANG Data Types.";
}
import ietf-tcp-common {
prefix tcpcmn;
reference
"RFC 9643: YANG Groupings for TCP Clients and TCP Servers.";
}
import ietf-inet-types {
prefix inet;
reference
"RFC 6991: Common YANG Data Types.";
}
import ietf-netconf-acm {
prefix nacm;
reference
"RFC 8341: Network Configuration Access Control Model.";
}
import ietf-key-chain {
prefix key-chain;
reference
"RFC 8177: YANG Data Model for Key Chains.";
}
organization
"IETF TCPM Working Group";
contact
"WG Web: https://datatracker.ietf.org/wg/tcpm/about
WG List: TCPM WG <tcpm@ietf.org>
Authors: Michael Scharf <michael.scharf@hs-esslingen.de>
Mahesh Jethanandani <mjethanandani@gmail.com>
Vishal Murgai <vmurgai@gmail.com>";
description
"This module focuses on fundamental TCP functions and basic
statistics. The model can be augmented to address more advanced
or implementation-specific TCP features.
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL
NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED',
'MAY', and 'OPTIONAL' in this document are to be interpreted as
described in BCP 14 (RFC 2119) (RFC 8174) when, and only when,
they appear in all capitals, as shown here.
Copyright (c) 2024 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Revised BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC 9648
(https://www.rfc-editor.org/info/rfc9648); see the RFC itself
for full legal notices.";
revision 2024-10-10 {
description
"Initial version.";
reference
"RFC 9648: YANG Data Model for TCP.";
}
// Typedefs
typedef mss {
type uint16;
description
"Type definition for the Maximum Segment Size.";
}
// Features
feature statistics {
description
"This implementation supports statistics reporting.";
}
feature authentication {
description
"This implementation supports authentication.";
}
// Identities
identity aes-128 {
base key-chain:crypto-algorithm;
description
"AES128 authentication algorithm used by TCP-AO.";
reference
"RFC 5926: Cryptographic Algorithms for the TCP
Authentication Option (TCP-AO).";
}
// TCP-AO Groupings
grouping ao {
leaf send-id {
type uint8 {
range "0..max";
}
description
"The SendID is inserted as the KeyID of the TCP-AO option
of outgoing segments. In a consistent configuration, the
SendID matches the RecvID at the other endpoint.";
reference
"RFC 5925: The TCP Authentication Option, Section 3.1.";
}
leaf recv-id {
type uint8 {
range "0..max";
}
description
"The RecvID is matched against the TCP-AO KeyID of incoming
segments. In a consistent configuration, the RecvID matches
the SendID at the other endpoint.";
reference
"RFC 5925: The TCP Authentication Option, Section 3.1.";
}
leaf include-tcp-options {
type boolean;
default "true";
description
"When set to true, TCP options are included in the message
authentication code (MAC) calculation.";
reference
"RFC 5925: The TCP Authentication Option, Section 3.1.";
}
leaf accept-key-mismatch {
type boolean;
description
"Accept, when set to true, TCP segments with a Master Key
Tuple (MKT) that is not configured.";
reference
"RFC 5925: The TCP Authentication Option, Section 7.3.";
}
leaf r-next-key-id {
type uint8;
config false;
description
"A field indicating the Master Key Tuple (MKT) that is ready
at the sender to be used to authenticate received segments,
i.e., the desired 'receive next' key ID.";
reference
"RFC 5925: The TCP Authentication Option.";
}
description
"Authentication Option (AO) for TCP.";
reference
"RFC 5925: The TCP Authentication Option.";
}
// TCP configuration
container tcp {
presence "The container for TCP configuration.";
description
"TCP container.";
container connections {
list connection {
key "local-address remote-address local-port remote-port";
leaf local-address {
type inet:ip-address;
description
"Identifies the address that is used by the local
endpoint for the connection and is one of the four
elements that form the connection identifier.";
}
leaf remote-address {
type inet:ip-address;
description
"Identifies the address that is used by the remote
endpoint for the connection and is one of the four
elements that form the connection identifier.";
}
leaf local-port {
type inet:port-number;
description
"Identifies the local TCP port used for the connection
and is one of the four elements that form the
connection identifier.";
}
leaf remote-port {
type inet:port-number;
description
"Identifies the remote TCP port used for the connection
and is one of the four elements that form the
connection identifier.";
}
leaf mss {
type mss;
description
"Maximum Segment Size (MSS) desired on this connection.
Note that the 'effective send MSS' can be smaller than
what is configured here.";
reference
"RFC 9293: Transmission Control Protocol (TCP).";
}
leaf pmtud {
type boolean;
default "false";
description
"Turns Path Maximum Transmission Unit Discovery (PMTUD)
on (true) or off (false).";
reference
"RFC 9293: Transmission Control Protocol (TCP).";
}
uses tcpcmn:tcp-common-grouping;
leaf state {
type enumeration {
enum closed {
value 1;
description
"Connection is closed. Connections in this state
may not appear in this list.";
}
enum listen {
value 2;
description
"Represents waiting for a connection request from any
remote TCP peer and port.";
}
enum syn-sent {
value 3;
description
"Represents waiting for a matching connection request
after having sent a connection request.";
}
enum syn-received {
value 4;
description
"Represents waiting for a confirming connection
request acknowledgment after having both received
and sent a connection request.";
}
enum established {
value 5;
description
"Represents an open connection; data received can be
delivered to the user. The normal state for the
data transfer phase of the connection.";
}
enum fin-wait-1 {
value 6;
description
"Represents waiting for a connection termination
request from the remote TCP peer or an
acknowledgment of the connection termination
request previously sent.";
}
enum fin-wait-2 {
value 7;
description
"Represents waiting for a connection termination
request from the remote TCP peer.";
}
enum close-wait {
value 8;
description
"Represents waiting for a connection termination
request from the local user.";
}
enum last-ack {
value 9;
description
"Represents waiting for an acknowledgment of the
connection termination request previously sent to
the remote TCP peer (this termination request sent
to the remote TCP peer already included an
acknowledgment of the termination request sent from
the remote TCP peer).";
}
enum closing {
value 10;
description
"Represents waiting for a connection termination
request acknowledgment from the remote TCP peer.";
}
enum time-wait {
value 11;
description
"Represents waiting for enough time to pass to be
sure the remote TCP peer received the
acknowledgment of its connection termination
request and to avoid new connections being impacted
by delayed segments from previous connections.";
}
}
config false;
description
"The state of this TCP connection.";
}
description
"List of TCP connections with their parameters.
The list is modeled as writable even though only some of
the nodes are writable, e.g., keepalive. Connections
that are created and match this list SHOULD apply the
writable parameters. At the same time, implementations
may not allow creation of new TCP connections simply by
adding entries to the list. Furthermore, the behavior
upon removal is implementation-specific. Implementations
may not support closing or resetting a TCP connection
upon an operation that removes the entry from the list.
The operational state of this list SHOULD reflect
connections that have configured but not created and
connections that have been created. Connections in the
CLOSED state are not reflected on this list.";
}
description
"A container of all TCP connections.";
}
list tcp-listeners {
key "type address port";
config false;
description
"A table containing information about a particular
TCP listener.";
leaf type {
type inet:ip-version;
description
"The address type of address. The value
should be unspecified (0) if connection initiations
to all local IP addresses are accepted.";
}
leaf address {
type union {
type inet:ip-address;
type string {
length "0";
}
}
description
"The local IP address for this TCP connection.
The value of this node can be represented in three
possible ways, depending on the characteristics of the
listening application:
1. For an application willing to accept both IPv4 and
IPv6 datagrams, the value of this node must be
''h (a zero-length octet string), with the value
of the corresponding 'type' object being
unspecified (0).
2. For an application willing to accept only IPv4 or
IPv6 datagrams, the value of this node must be
'0.0.0.0' or '::' respectively, with
'type' representing the appropriate address type.
3. For an application that is listening for data
destined only to a specific IP address, the value
of this node is the specific local address, with
'type' representing the appropriate address type.";
}
leaf port {
type inet:port-number;
description
"The local port number for this TCP connection.";
}
}
container statistics {
if-feature "statistics";
config false;
leaf active-opens {
type yang:counter64;
description
"The number of times that TCP connections have made a
direct transition to the SYN-SENT state from the CLOSED
state.";
reference
"RFC 9293: Transmission Control Protocol (TCP).";
}
leaf passive-opens {
type yang:counter64;
description
"The number of times TCP connections have made a direct
transition to the SYN-RCVD state from the LISTEN state.";
reference
"RFC 9293: Transmission Control Protocol (TCP).";
}
leaf attempt-fails {
type yang:counter64;
description
"The number of times that TCP connections have made a
direct transition to the CLOSED state from either the
SYN-SENT state or the SYN-RCVD state, plus the number of
times that TCP connections have made a direct transition
to the LISTEN state from the SYN-RCVD state.";
reference
"RFC 9293: Transmission Control Protocol (TCP).";
}
leaf establish-resets {
type yang:counter64;
description
"The number of times that TCP connections have made a
direct transition to the CLOSED state from either the
ESTABLISHED state or the CLOSE-WAIT state.";
reference
"RFC 9293: Transmission Control Protocol (TCP).";
}
leaf currently-established {
type yang:gauge32;
description
"The number of TCP connections for which the current state
is either ESTABLISHED or CLOSE-WAIT.";
reference
"RFC 9293: Transmission Control Protocol (TCP).";
}
leaf in-segments {
type yang:counter64;
description
"The total number of TCP segments received, including those
received in error. This count includes TCP segments
received on currently established connections.";
reference
"RFC 9293: Transmission Control Protocol (TCP).";
}
leaf out-segments {
type yang:counter64;
description
"The total number of TCP segments sent, including those on
current connections but excluding those containing only
retransmitted octets.";
reference
"RFC 9293: Transmission Control Protocol (TCP).";
}
leaf retransmitted-segments {
type yang:counter64;
description
"The total number of TCP segments retransmitted; that is,
the number of TCP segments transmitted containing one or
more previously transmitted octets.";
reference
"RFC 9293: Transmission Control Protocol (TCP).";
}
leaf in-errors {
type yang:counter64;
description
"The total number of TCP segments received in error
(e.g., bad TCP checksums).";
reference
"RFC 9293: Transmission Control Protocol (TCP).";
}
leaf out-resets {
type yang:counter64;
description
"The number of TCP segments sent containing the RST flag.";
reference
"RFC 9293: Transmission Control Protocol (TCP).";
}
leaf auth-failures {
if-feature "authentication";
type yang:counter64;
description
"The number of times that authentication has failed either
with TCP-AO or MD5.";
}
action reset {
nacm:default-deny-all;
description
"Reset statistics action command.";
input {
leaf reset-at {
type yang:date-and-time;
description
"Time when the reset action needs to be
executed.";
}
}
output {
leaf reset-finished-at {
type yang:date-and-time;
description
"Time when the reset action command completed.";
}
}
}
description
"Statistics across all connections.";
}
}
augment "/key-chain:key-chains/key-chain:key-chain/key-chain:key" {
description
"Augmentation of the key-chain model to add TCP-AO and TCP-MD5
authentication.";
container authentication {
if-feature "authentication";
leaf keychain {
type key-chain:key-chain-ref;
description
"Reference to the key chain that will be used by
this model. Applicable for TCP-AO and TCP-MD5
only.";
reference
"RFC 8177: YANG Data Model for Key Chains.";
}
choice authentication {
container ao {
presence "Presence container for all TCP-AO related"
+ " configuration";
uses ao;
description
"Use TCP-AO to secure the connection.";
}
container md5 {
presence "Presence container for all MD5 related"
+ " configuration";
description
"Use TCP-MD5 to secure the connection. As the TCP MD5
signature option is obsoleted by TCP-AO, it is
RECOMMENDED to use TCP-AO instead.";
reference
"RFC 2385: Protection of BGP Sessions via the TCP MD5
Signature Option.";
}
description
"Choice of TCP authentication.";
}
description
"Authentication definitions for TCP configuration.
This includes parameters such as how to secure the
connection, which can be part of either the client
or server.";
}
}
}
<CODE ENDS>¶
IANA has registered the following URI in the "ns" registry defined in the "IETF XML Registry" [RFC3688].¶
IANA has registered the following in the "YANG Module Names" registry created by "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)" [RFC6020].¶
This is not an IANA maintained module; however, the URI and other details of the module are maintained by IANA.¶
This section is modeled after the template defined in Section 3.7.1 of [RFC8407].¶
The "ietf-tcp" YANG module defines a schema for data that is designed to be accessed via YANG-based management protocols, such as NETCONF [RFC6241] and RESTCONF [RFC8040]. These protocols have mandatory-to-implement secure transport layers (e.g., Secure Shell (SSH) [RFC4252], TLS [RFC8446], and QUIC [RFC9000]) and mandatory-to-implement mutual authentication.¶
The Network Configuration Access Control Model (NACM) [RFC8341] provides the means to restrict access for particular NETCONF or RESTCONF users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content.¶
There are a number of data nodes defined in this YANG module that are writable/creatable/deletable (i.e., "config true", which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations. These are the subtrees and data nodes and their sensitivity/vulnerability:¶
Some of the readable data nodes in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. These are the subtrees and data nodes and their sensitivity/vulnerability:¶
Some of the RPC operations in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control access to these operations. These are the operations and their sensitivity/vulnerability:¶
The module specified in this document supports MD5 to basically accommodate the installed BGP base. MD5 suffers from the security weaknesses discussed in Section 2 of [RFC6151] or Section 2.1 of [RFC6952].¶
This particular example demonstrates how a particular connection can be configured for keepalives.¶
NOTE: '\' line wrapping per RFC 8792
<?xml version="1.0" encoding="UTF-8"?>
<!--
This example shows how TCP keepalive, MSS, and PMTU can be configure\
d for a given connection. An idle connection is dropped after
idle-time + (max-probes * probe-interval).
-->
<tcp
xmlns="urn:ietf:params:xml:ns:yang:ietf-tcp">
<connections>
<connection>
<local-address>192.0.2.1</local-address>
<remote-address>192.0.2.2</remote-address>
<local-port>1025</local-port>
<remote-port>22</remote-port>
<mss>1400</mss>
<pmtud>true</pmtud>
<keepalives>
<idle-time>5</idle-time>
<max-probes>5</max-probes>
<probe-interval>10</probe-interval>
</keepalives>
</connection>
</connections>
</tcp>
¶
The following example demonstrates how to model a TCP-AO [RFC5925] configuration for the example in "TCP Authentication Option (TCP-AO) Test Vectors" [RFC9235]. The IP addresses and other parameters are taken from the test vectors.¶
NOTE: '\' line wrapping per RFC 8792
<?xml version="1.0" encoding="UTF-8"?>
<!--
This example sets TCP-AO configuration parameters similarly to
the examples in RFC 9235.
-->
<key-chains
xmlns="urn:ietf:params:xml:ns:yang:ietf-key-chain">
<key-chain>
<name>ao-config</name>
<description>"An example for TCP-AO configuration."</description>
<key>
<key-id>55</key-id>
<lifetime>
<send-lifetime>
<start-date-time>2017-01-01T00:00:00Z</start-date-time>
<end-date-time>2017-02-01T00:00:00Z</end-date-time>
</send-lifetime>
<accept-lifetime>
<start-date-time>2016-12-31T23:59:55Z</start-date-time>
<end-date-time>2017-02-01T00:00:05Z</end-date-time>
</accept-lifetime>
</lifetime>
<crypto-algorithm
xmlns:tcp=
"urn:ietf:params:xml:ns:yang:ietf-tcp">tcp:aes-128</crypto\
-algorithm>
<key-string>
<keystring>testvector</keystring>
</key-string>
<authentication
xmlns="urn:ietf:params:xml:ns:yang:ietf-tcp">
<keychain>ao-config</keychain>
<ao>
<send-id>61</send-id>
<recv-id>84</recv-id>
</ao>
</authentication>
</key>
</key-chain>
</key-chains>
¶
Here is the complete tree diagram for the TCP YANG data model.¶
module: ietf-tcp
+--rw tcp!
+--rw connections
| +--rw connection*
| [local-address remote-address local-port remote-port]
| +--rw local-address inet:ip-address
| +--rw remote-address inet:ip-address
| +--rw local-port inet:port-number
| +--rw remote-port inet:port-number
| +--rw mss? mss
| +--rw pmtud? boolean
| +--rw keepalives! {keepalives-supported}?
| | +--rw idle-time uint16
| | +--rw max-probes uint16
| | +--rw probe-interval uint16
| +--ro state? enumeration
+--ro tcp-listeners* [type address port]
| +--ro type inet:ip-version
| +--ro address union
| +--ro port inet:port-number
+--ro statistics {statistics}?
+--ro active-opens? yang:counter64
+--ro passive-opens? yang:counter64
+--ro attempt-fails? yang:counter64
+--ro establish-resets? yang:counter64
+--ro currently-established? yang:gauge32
+--ro in-segments? yang:counter64
+--ro out-segments? yang:counter64
+--ro retransmitted-segments? yang:counter64
+--ro in-errors? yang:counter64
+--ro out-resets? yang:counter64
+--ro auth-failures? yang:counter64
| {authentication}?
+---x reset
+---w input
| +---w reset-at? yang:date-and-time
+--ro output
+--ro reset-finished-at? yang:date-and-time
augment /key-chain:key-chains/key-chain:key-chain/key-chain:key:
+--rw authentication {authentication}?
+--rw keychain? key-chain:key-chain-ref
+--rw (authentication)?
+--:(ao)
| +--rw ao!
| +--rw send-id? uint8
| +--rw recv-id? uint8
| +--rw include-tcp-options? boolean
| +--rw accept-key-mismatch? boolean
| +--ro r-next-key-id? uint8
+--:(md5)
+--rw md5!
¶
Michael Scharf was supported by the StandICT.eu project, which is funded by the European Commission under the Horizon 2020 Programme.¶
The following persons have contributed to this document by reviews (in alphabetical order): Mohamed Boucadair, Gorry Fairhurst, Jeffrey Haas, and Tom Petch.¶