patch-2.4.25 linux-2.4.25/drivers/net/wan/n2.c

• Lines: 45
• Date: 2004-02-18 05:36:31.000000000 -0800
• Orig file: linux-2.4.24/drivers/net/wan/n2.c
• Orig date: 2003-11-28 10:26:20.000000000 -0800

diff -urN linux-2.4.24/drivers/net/wan/n2.c linux-2.4.25/drivers/net/wan/n2.c
@@ -16,7 +16,6 @@
  *    SDL Inc. PPP/HDLC/CISCO driver
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -36,6 +35,9 @@
 static const char* version = "SDL RISCom/N2 driver version: 1.14";
 static const char* devname = "RISCom/N2";
 
+#undef DEBUG_PKT
+#define DEBUG_RINGS
+
 #define USE_WINDOWSIZE 16384
 #define USE_BUS16BITS 1
 #define CLOCK_BASE 9830400	/* 9.8304 MHz */
@@ -257,7 +259,7 @@
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	port_t *port = hdlc_to_port(hdlc);
 
-#ifdef CONFIG_HDLC_DEBUG_RINGS
+#ifdef DEBUG_RINGS
 	if (cmd == SIOCDEVPRIVATE) {
 		sca_dump_rings(hdlc);
 		return 0;
@@ -415,7 +417,7 @@
 	card->buff_offset = (valid0 + valid1) * sizeof(pkt_desc) *
 		(card->tx_ring_buffers + card->rx_ring_buffers);
 
-	printk(KERN_DEBUG "n2: RISCom/N2 %u KB RAM, IRQ%u, "
+	printk(KERN_INFO "n2: RISCom/N2 %u KB RAM, IRQ%u, "
 	       "using %u TX + %u RX packets rings\n", card->ram_size / 1024,
 	       card->irq, card->tx_ring_buffers, card->rx_ring_buffers);
 
@@ -446,7 +448,7 @@
 		spin_lock_init(&port->lock);
 		dev->irq = irq;
 		dev->mem_start = winbase;
-		dev->mem_end = winbase + USE_WINDOWSIZE-1;
+		dev->mem_end = winbase + USE_WINDOWSIZE - 1;
 		dev->tx_queue_len = 50;
 		dev->do_ioctl = n2_ioctl;
 		dev->open = n2_open;