patch-2.4.22 linux-2.4.22/include/asm-ia64/sn/sn1/mmzone_sn1.h

• Lines: 150
• Date: 1969-12-31 16:00:00.000000000 -0800
• Orig file: linux-2.4.21/include/asm-ia64/sn/sn1/mmzone_sn1.h
• Orig date: 2002-08-02 17:39:45.000000000 -0700

diff -urN linux-2.4.21/include/asm-ia64/sn/sn1/mmzone_sn1.h linux-2.4.22/include/asm-ia64/sn/sn1/mmzone_sn1.h
@@ -1,149 +0,0 @@
-#ifndef _ASM_IA64_SN_MMZONE_SN1_H
-#define _ASM_IA64_SN_MMZONE_SN1_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000-2002 Silicon Graphics, Inc.  All rights reserved.
- */
-
-#include <linux/config.h>
-
-
-/*
- * SGI SN1 Arch defined values
- *
- * 	An SN1 physical address is broken down as follows:
- *
- *             +-----------------------------------------+
- *             |         |    |      |   node offset     |
- *             | unused  | AS | node |-------------------|
- *             |         |    |      | cn | clump offset |
- *             +-----------------------------------------+
- *              6       4 4  4 3    3 3  3 2            0
- *              3       4 3  0 9    3 2  0 9            0
- *
- *		bits 63-44	Unused - must be zero
- *		bits 43-40	Address space ID. Cached memory has a value of 0.
- *				Chipset & IO addresses have non-zero values.
- *		bits 39-33	Node number. Note that some configurations do NOT
- *				have a node zero.
- *		bits 32-0	Node offset.
- *
- *	The node offset can be further broken down as:
- *		bits 32-30	Clump (bank) number.
- *		bits 29-0	Clump (bank) offset.
- *
- *	A node consists of up to 8 clumps (banks) of memory. A clump may be empty, or may be
- *	populated with a single contiguous block of memory starting at clump
- *	offset 0. The size of the block is (2**n) * 64MB, where 0<n<5.
- *
- *
- * NOTE: This file exports symbols prefixed with "PLAT_". Symbols prefixed with
- *	 "SN_" are intended for internal use only and should not be used in
- *	 any platform independent code. 
- *
- *	 This file is also responsible for exporting the following definitions:
- *		cnodeid_t	Define a compact node id. 
- */
-
-typedef signed short cnodeid_t;
-
-#define SN1_BANKS_PER_NODE		8
-#define SN1_NODE_SIZE			(8UL*1024*1024*1024)	/* 8 GB per node */
-#define SN1_BANK_SIZE			(SN1_NODE_SIZE/SN1_BANKS_PER_NODE)
-#define SN1_NODE_SHIFT			33
-#define SN1_NODE_MASK			0x7fUL
-#define SN1_NODE_OFFSET_MASK		(SN1_NODE_SIZE-1)
-#define SN1_NODE_NUMBER(addr)		(((unsigned long)(addr) >> SN1_NODE_SHIFT) & SN1_NODE_MASK)
-#define SN1_NODE_CLUMP_NUMBER(addr)	(((unsigned long)(addr) >>30) & 7)
-#define SN1_NODE_OFFSET(addr)		(((unsigned long)(addr)) & SN1_NODE_OFFSET_MASK)
-#define SN1_KADDR(nasid, offset)	(((unsigned long)(nasid)<<SN1_NODE_SHIFT) | (offset) | PAGE_OFFSET)
-
-
-#define PLAT_MAX_NODE_NUMBER		128			/* Maximum node number +1 */
-#define PLAT_MAX_COMPACT_NODES		128			/* Maximum number of nodes in SSI */
-
-#define PLAT_MAX_PHYS_MEMORY		(1UL << 40)
-
-
-
-/*
- * On the SN platforms, a clump is the same as a memory bank.
- */
-#define PLAT_CLUMPS_PER_NODE		SN1_BANKS_PER_NODE
-#define PLAT_CLUMP_OFFSET(addr)		((unsigned long)(addr) & 0x3fffffffUL)
-#define PLAT_CLUMPSIZE                  (SN1_NODE_SIZE/PLAT_CLUMPS_PER_NODE)
-#define PLAT_MAXCLUMPS			(PLAT_CLUMPS_PER_NODE*PLAT_MAX_COMPACT_NODES)
-
-
-
-
-/*
- * PLAT_VALID_MEM_KADDR returns a boolean to indicate if a kaddr is potentially a
- * valid cacheable identity mapped RAM memory address.
- * Note that the RAM may or may not actually be present!!
- */
-#define SN1_VALID_KERN_ADDR_MASK	0xffffff0000000000UL
-#define SN1_VALID_KERN_ADDR_VALUE	0xe000000000000000UL
-#define PLAT_VALID_MEM_KADDR(kaddr)	(((unsigned long)(kaddr) & SN1_VALID_KERN_ADDR_MASK) == SN1_VALID_KERN_ADDR_VALUE)
-
-
-
-/*
- * Memory is conceptually divided into chunks. A chunk is either
- * completely present, or else the kernel assumes it is completely
- * absent. Each node consists of a number of possibly discontiguous chunks.
- */
-#define SN1_CHUNKSHIFT			26			/* 64 MB */
-#define PLAT_CHUNKSIZE			(1UL << SN1_CHUNKSHIFT)
-#define PLAT_CHUNKNUM(addr)		(((addr) & (PLAT_MAX_PHYS_MEMORY-1)) >> SN1_CHUNKSHIFT)
-
-
-/*
- * Given a kaddr, find the nid (compact nodeid)
- */
-#ifdef CONFIG_IA64_SGI_SN_DEBUG
-#define DISCONBUG(kaddr)		panic("DISCONTIG BUG: line %d, %s. kaddr 0x%lx",	 	\
-						__LINE__, __FILE__, (long)(kaddr))
-
-#define KVADDR_TO_NID(kaddr)		({long _ktn=(long)(kaddr);					\
-						kern_addr_valid(_ktn) ? 				\
-						local_node_data->physical_node_map[SN1_NODE_NUMBER(_ktn)] :\
-						(DISCONBUG(_ktn), 0UL);})
-#else
-#define KVADDR_TO_NID(kaddr)		(local_node_data->physical_node_map[SN1_NODE_NUMBER(kaddr)])
-#endif
-
-
-
-/*
- * Given a kaddr, find the index into the clump_mem_map_base array of the page struct entry
- * for the first page of the clump.
- */
-#define PLAT_CLUMP_MEM_MAP_INDEX(kaddr)		({long _kmmi=(long)(kaddr);				\
-							KVADDR_TO_NID(_kmmi) * PLAT_CLUMPS_PER_NODE +	\
-							SN1_NODE_CLUMP_NUMBER(_kmmi);})
-
-
-/*
- * Calculate a "goal" value to be passed to __alloc_bootmem_node for allocating structures on
- * nodes so that they dont alias to the same line in the cache as the previous allocated structure.
- * This macro takes an address of the end of previous allocation, rounds it to a page boundary & 
- * changes the node number.
- */
-#define PLAT_BOOTMEM_ALLOC_GOAL(cnode,kaddr)	__pa(SN1_KADDR(PLAT_PXM_TO_PHYS_NODE_NUMBER(nid_to_pxm_map[cnode]),		\
-						  (SN1_NODE_OFFSET(kaddr) + PAGE_SIZE - 1) >> PAGE_SHIFT << PAGE_SHIFT))
-
-
-
-
-/*
- * Convert a proximity domain number (from the ACPI tables) into a physical node number.
- */
-
-#define PLAT_PXM_TO_PHYS_NODE_NUMBER(pxm)	(pxm)
-
-#endif /* _ASM_IA64_SN_MMZONE_SN1_H */