patch-2.4.20 linux-2.4.20/drivers/char/synclinkmp.c
Next file: linux-2.4.20/drivers/char/toshiba.c
Previous file: linux-2.4.20/drivers/char/synclink.c
Back to the patch index
Back to the overall index
- Lines: 5612
- Date:
Thu Nov 28 15:53:12 2002
- Orig file:
linux-2.4.19/drivers/char/synclinkmp.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -urN linux-2.4.19/drivers/char/synclinkmp.c linux-2.4.20/drivers/char/synclinkmp.c
@@ -0,0 +1,5611 @@
+/*
+ * $Id: synclinkmp.c,v 3.17 2002/04/22 16:05:39 paulkf Exp $
+ *
+ * Device driver for Microgate SyncLink Multiport
+ * high speed multiprotocol serial adapter.
+ *
+ * written by Paul Fulghum for Microgate Corporation
+ * paulkf@microgate.com
+ *
+ * Microgate and SyncLink are trademarks of Microgate Corporation
+ *
+ * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
+ * This code is released under the GNU General Public License (GPL)
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
+#if defined(__i386__)
+# define BREAKPOINT() asm(" int $3");
+#else
+# define BREAKPOINT() { }
+#endif
+
+#define MAX_DEVICES 12
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <asm/serial.h>
+#include <linux/delay.h>
+#include <linux/ioctl.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/bitops.h>
+#include <asm/types.h>
+#include <linux/termios.h>
+#include <linux/tqueue.h>
+
+#ifdef CONFIG_SYNCLINK_SYNCPPP_MODULE
+#define CONFIG_SYNCLINK_SYNCPPP 1
+#endif
+
+#ifdef CONFIG_SYNCLINK_SYNCPPP
+#include <net/syncppp.h>
+#endif
+
+#include <asm/segment.h>
+#define GET_USER(error,value,addr) error = get_user(value,addr)
+#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
+#define PUT_USER(error,value,addr) error = put_user(value,addr)
+#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
+
+#include <asm/uaccess.h>
+
+#include "linux/synclink.h"
+
+static MGSL_PARAMS default_params = {
+ MGSL_MODE_HDLC, /* unsigned long mode */
+ 0, /* unsigned char loopback; */
+ HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
+ HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
+ 0, /* unsigned long clock_speed; */
+ 0xff, /* unsigned char addr_filter; */
+ HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
+ HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
+ HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
+ 9600, /* unsigned long data_rate; */
+ 8, /* unsigned char data_bits; */
+ 1, /* unsigned char stop_bits; */
+ ASYNC_PARITY_NONE /* unsigned char parity; */
+};
+
+/* size in bytes of DMA data buffers */
+#define SCABUFSIZE 1024
+#define SCA_MEM_SIZE 0x40000
+#define SCA_BASE_SIZE 512
+#define SCA_REG_SIZE 16
+#define SCA_MAX_PORTS 4
+#define SCAMAXDESC 128
+
+#define BUFFERLISTSIZE 4096
+
+/* SCA-I style DMA buffer descriptor */
+typedef struct _SCADESC
+{
+ u16 next; /* lower l6 bits of next descriptor addr */
+ u16 buf_ptr; /* lower 16 bits of buffer addr */
+ u8 buf_base; /* upper 8 bits of buffer addr */
+ u8 pad1;
+ u16 length; /* length of buffer */
+ u8 status; /* status of buffer */
+ u8 pad2;
+} SCADESC, *PSCADESC;
+
+typedef struct _SCADESC_EX
+{
+ /* device driver bookkeeping section */
+ char *virt_addr; /* virtual address of data buffer */
+ u16 phys_entry; /* lower 16-bits of physical address of this descriptor */
+} SCADESC_EX, *PSCADESC_EX;
+
+/* The queue of BH actions to be performed */
+
+#define BH_RECEIVE 1
+#define BH_TRANSMIT 2
+#define BH_STATUS 4
+
+#define IO_PIN_SHUTDOWN_LIMIT 100
+
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+struct _input_signal_events {
+ int ri_up;
+ int ri_down;
+ int dsr_up;
+ int dsr_down;
+ int dcd_up;
+ int dcd_down;
+ int cts_up;
+ int cts_down;
+};
+
+/*
+ * Device instance data structure
+ */
+typedef struct _synclinkmp_info {
+ void *if_ptr; /* General purpose pointer (used by SPPP) */
+ int magic;
+ int flags;
+ int count; /* count of opens */
+ int line;
+ unsigned short close_delay;
+ unsigned short closing_wait; /* time to wait before closing */
+
+ struct mgsl_icount icount;
+
+ struct termios normal_termios;
+ struct termios callout_termios;
+
+ struct tty_struct *tty;
+ int timeout;
+ int x_char; /* xon/xoff character */
+ int blocked_open; /* # of blocked opens */
+ long session; /* Session of opening process */
+ long pgrp; /* pgrp of opening process */
+ u16 read_status_mask1; /* break detection (SR1 indications) */
+ u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */
+ unsigned char ignore_status_mask1; /* break detection (SR1 indications) */
+ unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */
+ unsigned char *tx_buf;
+ int tx_put;
+ int tx_get;
+ int tx_count;
+
+ wait_queue_head_t open_wait;
+ wait_queue_head_t close_wait;
+
+ wait_queue_head_t status_event_wait_q;
+ wait_queue_head_t event_wait_q;
+ struct timer_list tx_timer; /* HDLC transmit timeout timer */
+ struct _synclinkmp_info *next_device; /* device list link */
+ struct timer_list status_timer; /* input signal status check timer */
+
+ spinlock_t lock; /* spinlock for synchronizing with ISR */
+ struct tq_struct task; /* task structure for scheduling bh */
+
+ u32 max_frame_size; /* as set by device config */
+
+ u32 pending_bh;
+
+ int bh_running; /* Protection from multiple */
+ int isr_overflow;
+ int bh_requested;
+
+ int dcd_chkcount; /* check counts to prevent */
+ int cts_chkcount; /* too many IRQs if a signal */
+ int dsr_chkcount; /* is floating */
+ int ri_chkcount;
+
+ char *buffer_list; /* virtual address of Rx & Tx buffer lists */
+ unsigned long buffer_list_phys;
+
+ unsigned int rx_buf_count; /* count of total allocated Rx buffers */
+ SCADESC *rx_buf_list; /* list of receive buffer entries */
+ SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
+ unsigned int current_rx_buf;
+
+ unsigned int tx_buf_count; /* count of total allocated Tx buffers */
+ SCADESC *tx_buf_list; /* list of transmit buffer entries */
+ SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
+ unsigned int last_tx_buf;
+
+ unsigned char *tmp_rx_buf;
+ unsigned int tmp_rx_buf_count;
+
+ int rx_enabled;
+ int rx_overflow;
+
+ int tx_enabled;
+ int tx_active;
+ u32 idle_mode;
+
+ unsigned char ie0_value;
+ unsigned char ie1_value;
+ unsigned char ie2_value;
+ unsigned char ctrlreg_value;
+ unsigned char old_signals;
+
+ char device_name[25]; /* device instance name */
+
+ int port_count;
+ int adapter_num;
+ int port_num;
+
+ struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
+
+ unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
+
+ unsigned int irq_level; /* interrupt level */
+ unsigned long irq_flags;
+ int irq_requested; /* nonzero if IRQ requested */
+
+ MGSL_PARAMS params; /* communications parameters */
+
+ unsigned char serial_signals; /* current serial signal states */
+
+ int irq_occurred; /* for diagnostics use */
+ unsigned int init_error; /* Initialization startup error */
+
+ u32 last_mem_alloc;
+ unsigned char* memory_base; /* shared memory address (PCI only) */
+ u32 phys_memory_base;
+ int shared_mem_requested;
+
+ unsigned char* sca_base; /* HD64570 SCA Memory address */
+ u32 phys_sca_base;
+ u32 sca_offset;
+ int sca_base_requested;
+
+ unsigned char* lcr_base; /* local config registers (PCI only) */
+ u32 phys_lcr_base;
+ u32 lcr_offset;
+ int lcr_mem_requested;
+
+ unsigned char* statctrl_base; /* status/control register memory */
+ u32 phys_statctrl_base;
+ u32 statctrl_offset;
+ int sca_statctrl_requested;
+
+ u32 misc_ctrl_value;
+ char flag_buf[MAX_ASYNC_BUFFER_SIZE];
+ char char_buf[MAX_ASYNC_BUFFER_SIZE];
+ BOOLEAN drop_rts_on_tx_done;
+
+ struct _input_signal_events input_signal_events;
+
+ /* SPPP/Cisco HDLC device parts */
+ int netcount;
+ int dosyncppp;
+ spinlock_t netlock;
+#ifdef CONFIG_SYNCLINK_SYNCPPP
+ struct ppp_device pppdev;
+ char netname[10];
+ struct net_device *netdev;
+ struct net_device_stats netstats;
+ struct net_device netdevice;
+#endif
+} SLMP_INFO;
+
+#define MGSL_MAGIC 0x5401
+
+/*
+ * define serial signal status change macros
+ */
+#define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */
+#define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */
+#define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */
+#define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */
+
+/* Common Register macros */
+#define LPR 0x00
+#define PABR0 0x02
+#define PABR1 0x03
+#define WCRL 0x04
+#define WCRM 0x05
+#define WCRH 0x06
+#define DPCR 0x08
+#define DMER 0x09
+#define ISR0 0x10
+#define ISR1 0x11
+#define ISR2 0x12
+#define IER0 0x14
+#define IER1 0x15
+#define IER2 0x16
+#define ITCR 0x18
+#define INTVR 0x1a
+#define IMVR 0x1c
+
+/* MSCI Register macros */
+#define TRB 0x20
+#define TRBL 0x20
+#define TRBH 0x21
+#define SR0 0x22
+#define SR1 0x23
+#define SR2 0x24
+#define SR3 0x25
+#define FST 0x26
+#define IE0 0x28
+#define IE1 0x29
+#define IE2 0x2a
+#define FIE 0x2b
+#define CMD 0x2c
+#define MD0 0x2e
+#define MD1 0x2f
+#define MD2 0x30
+#define CTL 0x31
+#define SA0 0x32
+#define SA1 0x33
+#define IDL 0x34
+#define TMC 0x35
+#define RXS 0x36
+#define TXS 0x37
+#define TRC0 0x38
+#define TRC1 0x39
+#define RRC 0x3a
+#define CST0 0x3c
+#define CST1 0x3d
+
+/* Timer Register Macros */
+#define TCNT 0x60
+#define TCNTL 0x60
+#define TCNTH 0x61
+#define TCONR 0x62
+#define TCONRL 0x62
+#define TCONRH 0x63
+#define TMCS 0x64
+#define TEPR 0x65
+
+/* DMA Controller Register macros */
+#define DAR 0x80
+#define DARL 0x80
+#define DARH 0x81
+#define DARB 0x82
+#define BAR 0x80
+#define BARL 0x80
+#define BARH 0x81
+#define BARB 0x82
+#define SAR 0x84
+#define SARL 0x84
+#define SARH 0x85
+#define SARB 0x86
+#define CPB 0x86
+#define CDA 0x88
+#define CDAL 0x88
+#define CDAH 0x89
+#define EDA 0x8a
+#define EDAL 0x8a
+#define EDAH 0x8b
+#define BFL 0x8c
+#define BFLL 0x8c
+#define BFLH 0x8d
+#define BCR 0x8e
+#define BCRL 0x8e
+#define BCRH 0x8f
+#define DSR 0x90
+#define DMR 0x91
+#define FCT 0x93
+#define DIR 0x94
+#define DCMD 0x95
+
+/* combine with timer or DMA register address */
+#define TIMER0 0x00
+#define TIMER1 0x08
+#define TIMER2 0x10
+#define TIMER3 0x18
+#define RXDMA 0x00
+#define TXDMA 0x20
+
+/* SCA Command Codes */
+#define NOOP 0x00
+#define TXRESET 0x01
+#define TXENABLE 0x02
+#define TXDISABLE 0x03
+#define TXCRCINIT 0x04
+#define TXCRCEXCL 0x05
+#define TXEOM 0x06
+#define TXABORT 0x07
+#define MPON 0x08
+#define TXBUFCLR 0x09
+#define RXRESET 0x11
+#define RXENABLE 0x12
+#define RXDISABLE 0x13
+#define RXCRCINIT 0x14
+#define RXREJECT 0x15
+#define SEARCHMP 0x16
+#define RXCRCEXCL 0x17
+#define RXCRCCALC 0x18
+#define CHRESET 0x21
+#define HUNT 0x31
+
+/* DMA command codes */
+#define SWABORT 0x01
+#define FEICLEAR 0x02
+
+/* IE0 */
+#define TXINTE BIT7
+#define RXINTE BIT6
+#define TXRDYE BIT1
+#define RXRDYE BIT0
+
+/* IE1 & SR1 */
+#define UDRN BIT7
+#define IDLE BIT6
+#define SYNCD BIT4
+#define FLGD BIT4
+#define CCTS BIT3
+#define CDCD BIT2
+#define BRKD BIT1
+#define ABTD BIT1
+#define GAPD BIT1
+#define BRKE BIT0
+#define IDLD BIT0
+
+/* IE2 & SR2 */
+#define EOM BIT7
+#define PMP BIT6
+#define SHRT BIT6
+#define PE BIT5
+#define ABT BIT5
+#define FRME BIT4
+#define RBIT BIT4
+#define OVRN BIT3
+#define CRCE BIT2
+
+
+#define jiffies_from_ms(a) ((((a) * HZ)/1000)+1)
+
+/*
+ * Global linked list of SyncLink devices
+ */
+static SLMP_INFO *synclinkmp_device_list = NULL;
+static int synclinkmp_adapter_count = -1;
+static int synclinkmp_device_count = 0;
+
+/*
+ * Set this param to non-zero to load eax with the
+ * .text section address and breakpoint on module load.
+ * This is useful for use with gdb and add-symbol-file command.
+ */
+static int break_on_load=0;
+
+/*
+ * Driver major number, defaults to zero to get auto
+ * assigned major number. May be forced as module parameter.
+ */
+static int ttymajor=0;
+static int cuamajor=0;
+
+/*
+ * Array of user specified options for ISA adapters.
+ */
+static int debug_level = 0;
+static int maxframe[MAX_DEVICES] = {0,};
+static int dosyncppp[MAX_DEVICES] = {0,};
+
+MODULE_PARM(break_on_load,"i");
+MODULE_PARM(ttymajor,"i");
+MODULE_PARM(cuamajor,"i");
+MODULE_PARM(debug_level,"i");
+MODULE_PARM(maxframe,"1-" __MODULE_STRING(MAX_DEVICES) "i");
+MODULE_PARM(dosyncppp,"1-" __MODULE_STRING(MAX_DEVICES) "i");
+
+static char *driver_name = "SyncLink MultiPort driver";
+static char *driver_version = "$Revision: 3.17 $";
+
+static int __devinit synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
+static void __devexit synclinkmp_remove_one(struct pci_dev *dev);
+
+static struct pci_device_id synclinkmp_pci_tbl[] __devinitdata = {
+ { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
+ { 0, }, /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
+
+static struct pci_driver synclinkmp_pci_driver = {
+ name: "synclinkmp",
+ id_table: synclinkmp_pci_tbl,
+ probe: synclinkmp_init_one,
+ remove: __devexit_p(synclinkmp_remove_one),
+};
+
+
+static struct tty_driver serial_driver, callout_driver;
+static int serial_refcount;
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+static struct tty_struct *serial_table[MAX_DEVICES];
+static struct termios *serial_termios[MAX_DEVICES];
+static struct termios *serial_termios_locked[MAX_DEVICES];
+
+#ifndef MIN
+#define MIN(a,b) ((a) < (b) ? (a) : (b))
+#endif
+
+
+/* tty callbacks */
+
+static int open(struct tty_struct *tty, struct file * filp);
+static void close(struct tty_struct *tty, struct file * filp);
+static void hangup(struct tty_struct *tty);
+static void set_termios(struct tty_struct *tty, struct termios *old_termios);
+
+static int write(struct tty_struct *tty, int from_user, const unsigned char *buf, int count);
+static void put_char(struct tty_struct *tty, unsigned char ch);
+static void send_xchar(struct tty_struct *tty, char ch);
+static void wait_until_sent(struct tty_struct *tty, int timeout);
+static int write_room(struct tty_struct *tty);
+static void flush_chars(struct tty_struct *tty);
+static void flush_buffer(struct tty_struct *tty);
+static void tx_hold(struct tty_struct *tty);
+static void tx_release(struct tty_struct *tty);
+
+static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
+static int read_proc(char *page, char **start, off_t off, int count,int *eof, void *data);
+static int chars_in_buffer(struct tty_struct *tty);
+static void throttle(struct tty_struct * tty);
+static void unthrottle(struct tty_struct * tty);
+static void set_break(struct tty_struct *tty, int break_state);
+
+/* sppp support and callbacks */
+
+#ifdef CONFIG_SYNCLINK_SYNCPPP
+static void sppp_init(SLMP_INFO *info);
+static void sppp_delete(SLMP_INFO *info);
+static void sppp_rx_done(SLMP_INFO *info, char *buf, int size);
+static void sppp_tx_done(SLMP_INFO *info);
+
+static int sppp_cb_open(struct net_device *d);
+static int sppp_cb_close(struct net_device *d);
+static int sppp_cb_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
+static int sppp_cb_tx(struct sk_buff *skb, struct net_device *dev);
+static void sppp_cb_tx_timeout(struct net_device *dev);
+static struct net_device_stats *sppp_cb_net_stats(struct net_device *dev);
+#endif
+
+/* ioctl handlers */
+
+static int get_stats(SLMP_INFO *info, struct mgsl_icount *user_icount);
+static int get_params(SLMP_INFO *info, MGSL_PARAMS *params);
+static int set_params(SLMP_INFO *info, MGSL_PARAMS *params);
+static int get_txidle(SLMP_INFO *info, int*idle_mode);
+static int set_txidle(SLMP_INFO *info, int idle_mode);
+static int tx_enable(SLMP_INFO *info, int enable);
+static int tx_abort(SLMP_INFO *info);
+static int rx_enable(SLMP_INFO *info, int enable);
+static int map_status(int signals);
+static int modem_input_wait(SLMP_INFO *info,int arg);
+static int wait_mgsl_event(SLMP_INFO *info, int *mask_ptr);
+static int get_modem_info(SLMP_INFO *info, unsigned int *value);
+static int set_modem_info(SLMP_INFO *info, unsigned int cmd,unsigned int *value);
+static void set_break(struct tty_struct *tty, int break_state);
+
+static void add_device(SLMP_INFO *info);
+static void device_init(int adapter_num, struct pci_dev *pdev);
+static int claim_resources(SLMP_INFO *info);
+static void release_resources(SLMP_INFO *info);
+
+static int startup(SLMP_INFO *info);
+static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
+static void shutdown(SLMP_INFO *info);
+static void program_hw(SLMP_INFO *info);
+static void change_params(SLMP_INFO *info);
+
+static int init_adapter(SLMP_INFO *info);
+static int register_test(SLMP_INFO *info);
+static int irq_test(SLMP_INFO *info);
+static int loopback_test(SLMP_INFO *info);
+static int adapter_test(SLMP_INFO *info);
+static int memory_test(SLMP_INFO *info);
+
+static void reset_adapter(SLMP_INFO *info);
+static void reset_port(SLMP_INFO *info);
+static void async_mode(SLMP_INFO *info);
+static void hdlc_mode(SLMP_INFO *info);
+
+static void rx_stop(SLMP_INFO *info);
+static void rx_start(SLMP_INFO *info);
+static void rx_reset_buffers(SLMP_INFO *info);
+static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
+static int rx_get_frame(SLMP_INFO *info);
+
+static void tx_start(SLMP_INFO *info);
+static void tx_stop(SLMP_INFO *info);
+static void tx_load_fifo(SLMP_INFO *info);
+static void tx_set_idle(SLMP_INFO *info);
+static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
+
+static void get_signals(SLMP_INFO *info);
+static void set_signals(SLMP_INFO *info);
+static void enable_loopback(SLMP_INFO *info, int enable);
+static void set_rate(SLMP_INFO *info, u32 data_rate);
+
+static int bh_action(SLMP_INFO *info);
+static void bh_handler(void* Context);
+static void bh_receive(SLMP_INFO *info);
+static void bh_transmit(SLMP_INFO *info);
+static void bh_status(SLMP_INFO *info);
+static void isr_timer(SLMP_INFO *info);
+static void isr_rxint(SLMP_INFO *info);
+static void isr_rxrdy(SLMP_INFO *info);
+static void isr_txint(SLMP_INFO *info);
+static void isr_txrdy(SLMP_INFO *info);
+static void isr_rxdmaok(SLMP_INFO *info);
+static void isr_rxdmaerror(SLMP_INFO *info);
+static void isr_txdmaok(SLMP_INFO *info);
+static void isr_txdmaerror(SLMP_INFO *info);
+static void isr_io_pin(SLMP_INFO *info, u16 status);
+static void synclinkmp_interrupt(int irq, void *dev_id, struct pt_regs * regs);
+
+static int alloc_dma_bufs(SLMP_INFO *info);
+static void free_dma_bufs(SLMP_INFO *info);
+static int alloc_buf_list(SLMP_INFO *info);
+static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
+static int alloc_tmp_rx_buf(SLMP_INFO *info);
+static void free_tmp_rx_buf(SLMP_INFO *info);
+
+static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
+static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
+static void tx_timeout(unsigned long context);
+static void status_timeout(unsigned long context);
+
+static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
+static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
+static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
+static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
+static unsigned char read_status_reg(SLMP_INFO * info);
+static void write_control_reg(SLMP_INFO * info);
+
+
+static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes
+static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes
+static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes
+
+static u32 misc_ctrl_value = 0x007e4040;
+static u32 lcr1_brdr_value = 0x0080002d;
+
+static u32 read_ahead_count = 8;
+
+/* DPCR, DMA Priority Control
+ *
+ * 07..05 Not used, must be 0
+ * 04 BRC, bus release condition: 0=all transfers complete
+ * 1=release after 1 xfer on all channels
+ * 03 CCC, channel change condition: 0=every cycle
+ * 1=after each channel completes all xfers
+ * 02..00 PR<2..0>, priority 100=round robin
+ *
+ * 00000100 = 0x00
+ */
+static unsigned char dma_priority = 0x04;
+
+// Number of bytes that can be written to shared RAM
+// in a single write operation
+static u32 sca_pci_load_interval = 64;
+
+/*
+ * 1st function defined in .text section. Calling this function in
+ * init_module() followed by a breakpoint allows a remote debugger
+ * (gdb) to get the .text address for the add-symbol-file command.
+ * This allows remote debugging of dynamically loadable modules.
+ */
+static void* synclinkmp_get_text_ptr(void);
+static void* synclinkmp_get_text_ptr() {return synclinkmp_get_text_ptr;}
+
+static inline int sanity_check(SLMP_INFO *info,
+ kdev_t device, const char *routine)
+{
+#ifdef SANITY_CHECK
+ static const char *badmagic =
+ "Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
+ static const char *badinfo =
+ "Warning: null synclinkmp_struct for (%s) in %s\n";
+
+ if (!info) {
+ printk(badinfo, kdevname(device), routine);
+ return 1;
+ }
+ if (info->magic != MGSL_MAGIC) {
+ printk(badmagic, kdevname(device), routine);
+ return 1;
+ }
+#endif
+ return 0;
+}
+
+/* tty callbacks */
+
+/* Called when a port is opened. Init and enable port.
+ */
+static int open(struct tty_struct *tty, struct file *filp)
+{
+ SLMP_INFO *info;
+ int retval, line;
+ unsigned long flags;
+
+ line = MINOR(tty->device) - tty->driver.minor_start;
+ if ((line < 0) || (line >= synclinkmp_device_count)) {
+ printk("%s(%d): open with illegal line #%d.\n",
+ __FILE__,__LINE__,line);
+ return -ENODEV;
+ }
+
+ info = synclinkmp_device_list;
+ while(info && info->line != line)
+ info = info->next_device;
+ if ( !info ){
+ printk("%s(%d):%s Can't find specified device on open (line=%d)\n",
+ __FILE__,__LINE__,info->device_name,line);
+ return -ENODEV;
+ }
+
+ if ( info->init_error ) {
+ printk("%s(%d):%s device is not allocated, init error=%d\n",
+ __FILE__,__LINE__,info->device_name,info->init_error);
+ return -ENODEV;
+ }
+
+ tty->driver_data = info;
+ info->tty = tty;
+ if (sanity_check(info, tty->device, "open"))
+ return -ENODEV;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s open(), old ref count = %d\n",
+ __FILE__,__LINE__,tty->driver.name, info->count);
+
+ MOD_INC_USE_COUNT;
+
+ /* If port is closing, signal caller to try again */
+ if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
+ if (info->flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->close_wait);
+ retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS);
+ goto cleanup;
+ }
+
+ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+ spin_lock_irqsave(&info->netlock, flags);
+ if (info->netcount) {
+ retval = -EBUSY;
+ spin_unlock_irqrestore(&info->netlock, flags);
+ goto cleanup;
+ }
+ info->count++;
+ spin_unlock_irqrestore(&info->netlock, flags);
+
+ if (info->count == 1) {
+ /* 1st open on this device, init hardware */
+ retval = startup(info);
+ if (retval < 0)
+ goto cleanup;
+ }
+
+ retval = block_til_ready(tty, filp, info);
+ if (retval) {
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s block_til_ready() returned %d\n",
+ __FILE__,__LINE__, info->device_name, retval);
+ goto cleanup;
+ }
+
+ if ((info->count == 1) &&
+ info->flags & ASYNC_SPLIT_TERMIOS) {
+ if (tty->driver.subtype == SERIAL_TYPE_NORMAL)
+ *tty->termios = info->normal_termios;
+ else
+ *tty->termios = info->callout_termios;
+ change_params(info);
+ }
+
+ info->session = current->session;
+ info->pgrp = current->pgrp;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s open() success\n",
+ __FILE__,__LINE__, info->device_name);
+ retval = 0;
+
+cleanup:
+ if (retval) {
+ if(MOD_IN_USE)
+ MOD_DEC_USE_COUNT;
+ if(info->count)
+ info->count--;
+ }
+
+ return retval;
+}
+
+/* Called when port is closed. Wait for remaining data to be
+ * sent. Disable port and free resources.
+ */
+static void close(struct tty_struct *tty, struct file *filp)
+{
+ SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
+
+ if (!info || sanity_check(info, tty->device, "close"))
+ return;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s close() entry, count=%d\n",
+ __FILE__,__LINE__, info->device_name, info->count);
+
+ if (!info->count || tty_hung_up_p(filp))
+ goto cleanup;
+
+ if ((tty->count == 1) && (info->count != 1)) {
+ /*
+ * tty->count is 1 and the tty structure will be freed.
+ * info->count should be one in this case.
+ * if it's not, correct it so that the port is shutdown.
+ */
+ printk("%s(%d):%s close: bad refcount; tty->count is 1, "
+ "info->count is %d\n",
+ __FILE__,__LINE__, info->device_name, info->count);
+ info->count = 1;
+ }
+
+ info->count--;
+
+ /* if at least one open remaining, leave hardware active */
+ if (info->count)
+ goto cleanup;
+
+ info->flags |= ASYNC_CLOSING;
+
+ /* Save the termios structure, since this port may have
+ * separate termios for callout and dialin.
+ */
+ if (info->flags & ASYNC_NORMAL_ACTIVE)
+ info->normal_termios = *tty->termios;
+ if (info->flags & ASYNC_CALLOUT_ACTIVE)
+ info->callout_termios = *tty->termios;
+
+ /* set tty->closing to notify line discipline to
+ * only process XON/XOFF characters. Only the N_TTY
+ * discipline appears to use this (ppp does not).
+ */
+ tty->closing = 1;
+
+ /* wait for transmit data to clear all layers */
+
+ if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s close() calling tty_wait_until_sent\n",
+ __FILE__,__LINE__, info->device_name );
+ tty_wait_until_sent(tty, info->closing_wait);
+ }
+
+ if (info->flags & ASYNC_INITIALIZED)
+ wait_until_sent(tty, info->timeout);
+
+ if (tty->driver.flush_buffer)
+ tty->driver.flush_buffer(tty);
+
+ if (tty->ldisc.flush_buffer)
+ tty->ldisc.flush_buffer(tty);
+
+ shutdown(info);
+
+ tty->closing = 0;
+ info->tty = 0;
+
+ if (info->blocked_open) {
+ if (info->close_delay) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(info->close_delay);
+ }
+ wake_up_interruptible(&info->open_wait);
+ }
+
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE|
+ ASYNC_CLOSING);
+
+ wake_up_interruptible(&info->close_wait);
+
+cleanup:
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
+ tty->driver.name, info->count);
+ if(MOD_IN_USE)
+ MOD_DEC_USE_COUNT;
+}
+
+/* Called by tty_hangup() when a hangup is signaled.
+ * This is the same as closing all open descriptors for the port.
+ */
+static void hangup(struct tty_struct *tty)
+{
+ SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s hangup()\n",
+ __FILE__,__LINE__, info->device_name );
+
+ if (sanity_check(info, tty->device, "hangup"))
+ return;
+
+ flush_buffer(tty);
+ shutdown(info);
+
+ info->count = 0;
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE);
+ info->tty = 0;
+
+ wake_up_interruptible(&info->open_wait);
+}
+
+/* Set new termios settings
+ */
+static void set_termios(struct tty_struct *tty, struct termios *old_termios)
+{
+ SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
+ tty->driver.name );
+
+ /* just return if nothing has changed */
+ if ((tty->termios->c_cflag == old_termios->c_cflag)
+ && (RELEVANT_IFLAG(tty->termios->c_iflag)
+ == RELEVANT_IFLAG(old_termios->c_iflag)))
+ return;
+
+ change_params(info);
+
+ /* Handle transition to B0 status */
+ if (old_termios->c_cflag & CBAUD &&
+ !(tty->termios->c_cflag & CBAUD)) {
+ info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ spin_lock_irqsave(&info->lock,flags);
+ set_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+
+ /* Handle transition away from B0 status */
+ if (!(old_termios->c_cflag & CBAUD) &&
+ tty->termios->c_cflag & CBAUD) {
+ info->serial_signals |= SerialSignal_DTR;
+ if (!(tty->termios->c_cflag & CRTSCTS) ||
+ !test_bit(TTY_THROTTLED, &tty->flags)) {
+ info->serial_signals |= SerialSignal_RTS;
+ }
+ spin_lock_irqsave(&info->lock,flags);
+ set_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+
+ /* Handle turning off CRTSCTS */
+ if (old_termios->c_cflag & CRTSCTS &&
+ !(tty->termios->c_cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ tx_release(tty);
+ }
+}
+
+/* Send a block of data
+ *
+ * Arguments:
+ *
+ * tty pointer to tty information structure
+ * from_user flag: 1 = from user process
+ * buf pointer to buffer containing send data
+ * count size of send data in bytes
+ *
+ * Return Value: number of characters written
+ */
+static int write(struct tty_struct *tty, int from_user,
+ const unsigned char *buf, int count)
+{
+ int c, ret = 0, err;
+ SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s write() count=%d\n",
+ __FILE__,__LINE__,info->device_name,count);
+
+ if (sanity_check(info, tty->device, "write"))
+ goto cleanup;
+
+ if (!tty || !info->tx_buf)
+ goto cleanup;
+
+ if (info->params.mode == MGSL_MODE_HDLC) {
+ if (count > info->max_frame_size) {
+ ret = -EIO;
+ goto cleanup;
+ }
+ if (info->tx_active)
+ goto cleanup;
+ if (info->tx_count) {
+ /* send accumulated data from send_char() calls */
+ /* as frame and wait before accepting more data. */
+ tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
+ goto start;
+ }
+ if (!from_user) {
+ ret = info->tx_count = count;
+ tx_load_dma_buffer(info, buf, count);
+ goto start;
+ }
+ }
+
+ for (;;) {
+ c = MIN(count,
+ MIN(info->max_frame_size - info->tx_count - 1,
+ info->max_frame_size - info->tx_put));
+ if (c <= 0)
+ break;
+
+ if (from_user) {
+ COPY_FROM_USER(err, info->tx_buf + info->tx_put, buf, c);
+ if (err) {
+ if (!ret)
+ ret = -EFAULT;
+ break;
+ }
+ } else
+ memcpy(info->tx_buf + info->tx_put, buf, c);
+
+ spin_lock_irqsave(&info->lock,flags);
+ info->tx_put += c;
+ if (info->tx_put >= info->max_frame_size)
+ info->tx_put -= info->max_frame_size;
+ info->tx_count += c;
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ buf += c;
+ count -= c;
+ ret += c;
+ }
+
+ if (info->params.mode == MGSL_MODE_HDLC) {
+ if (count) {
+ ret = info->tx_count = 0;
+ goto cleanup;
+ }
+ tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
+ }
+start:
+ if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
+ spin_lock_irqsave(&info->lock,flags);
+ if (!info->tx_active)
+ tx_start(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+
+cleanup:
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk( "%s(%d):%s write() returning=%d\n",
+ __FILE__,__LINE__,info->device_name,ret);
+ return ret;
+}
+
+/* Add a character to the transmit buffer.
+ */
+static void put_char(struct tty_struct *tty, unsigned char ch)
+{
+ SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+ unsigned long flags;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO ) {
+ printk( "%s(%d):%s put_char(%d)\n",
+ __FILE__,__LINE__,info->device_name,ch);
+ }
+
+ if (sanity_check(info, tty->device, "put_char"))
+ return;
+
+ if (!tty || !info->tx_buf)
+ return;
+
+ spin_lock_irqsave(&info->lock,flags);
+
+ if ( (info->params.mode != MGSL_MODE_HDLC) ||
+ !info->tx_active ) {
+
+ if (info->tx_count < info->max_frame_size - 1) {
+ info->tx_buf[info->tx_put++] = ch;
+ if (info->tx_put >= info->max_frame_size)
+ info->tx_put -= info->max_frame_size;
+ info->tx_count++;
+ }
+ }
+
+ spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* Send a high-priority XON/XOFF character
+ */
+static void send_xchar(struct tty_struct *tty, char ch)
+{
+ SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s send_xchar(%d)\n",
+ __FILE__,__LINE__, info->device_name, ch );
+
+ if (sanity_check(info, tty->device, "send_xchar"))
+ return;
+
+ info->x_char = ch;
+ if (ch) {
+ /* Make sure transmit interrupts are on */
+ spin_lock_irqsave(&info->lock,flags);
+ if (!info->tx_enabled)
+ tx_start(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+}
+
+/* Wait until the transmitter is empty.
+ */
+static void wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
+ unsigned long orig_jiffies, char_time;
+
+ if (!info )
+ return;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s wait_until_sent() entry\n",
+ __FILE__,__LINE__, info->device_name );
+
+ if (sanity_check(info, tty->device, "wait_until_sent"))
+ return;
+
+ if (!(info->flags & ASYNC_INITIALIZED))
+ goto exit;
+
+ orig_jiffies = jiffies;
+
+ /* Set check interval to 1/5 of estimated time to
+ * send a character, and make it at least 1. The check
+ * interval should also be less than the timeout.
+ * Note: use tight timings here to satisfy the NIST-PCTS.
+ */
+
+ if ( info->params.data_rate ) {
+ char_time = info->timeout/(32 * 5);
+ if (!char_time)
+ char_time++;
+ } else
+ char_time = 1;
+
+ if (timeout)
+ char_time = MIN(char_time, timeout);
+
+ if ( info->params.mode == MGSL_MODE_HDLC ) {
+ while (info->tx_active) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(char_time);
+ if (signal_pending(current))
+ break;
+ if (timeout && ((orig_jiffies + timeout) < jiffies))
+ break;
+ }
+ } else {
+ //TODO: determine if there is something similar to USC16C32
+ // TXSTATUS_ALL_SENT status
+ while ( info->tx_active && info->tx_enabled) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(char_time);
+ if (signal_pending(current))
+ break;
+ if (timeout && ((orig_jiffies + timeout) < jiffies))
+ break;
+ }
+ }
+
+exit:
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s wait_until_sent() exit\n",
+ __FILE__,__LINE__, info->device_name );
+}
+
+/* Return the count of free bytes in transmit buffer
+ */
+static int write_room(struct tty_struct *tty)
+{
+ SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+ int ret;
+
+ if (sanity_check(info, tty->device, "write_room"))
+ return 0;
+
+ if (info->params.mode == MGSL_MODE_HDLC) {
+ ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
+ } else {
+ ret = info->max_frame_size - info->tx_count - 1;
+ if (ret < 0)
+ ret = 0;
+ }
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s write_room()=%d\n",
+ __FILE__, __LINE__, info->device_name, ret);
+
+ return ret;
+}
+
+/* enable transmitter and send remaining buffered characters
+ */
+static void flush_chars(struct tty_struct *tty)
+{
+ SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+ unsigned long flags;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
+ __FILE__,__LINE__,info->device_name,info->tx_count);
+
+ if (sanity_check(info, tty->device, "flush_chars"))
+ return;
+
+ if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
+ !info->tx_buf)
+ return;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
+ __FILE__,__LINE__,info->device_name );
+
+ spin_lock_irqsave(&info->lock,flags);
+
+ if (!info->tx_active) {
+ if ( (info->params.mode == MGSL_MODE_HDLC) &&
+ info->tx_count ) {
+ /* operating in synchronous (frame oriented) mode */
+ /* copy data from circular tx_buf to */
+ /* transmit DMA buffer. */
+ tx_load_dma_buffer(info,
+ info->tx_buf,info->tx_count);
+ }
+ tx_start(info);
+ }
+
+ spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* Discard all data in the send buffer
+ */
+static void flush_buffer(struct tty_struct *tty)
+{
+ SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s flush_buffer() entry\n",
+ __FILE__,__LINE__, info->device_name );
+
+ if (sanity_check(info, tty->device, "flush_buffer"))
+ return;
+
+ spin_lock_irqsave(&info->lock,flags);
+ info->tx_count = info->tx_put = info->tx_get = 0;
+ del_timer(&info->tx_timer);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ wake_up_interruptible(&tty->write_wait);
+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+ tty->ldisc.write_wakeup)
+ (tty->ldisc.write_wakeup)(tty);
+}
+
+/* throttle (stop) transmitter
+ */
+static void tx_hold(struct tty_struct *tty)
+{
+ SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+ unsigned long flags;
+
+ if (sanity_check(info, tty->device, "tx_hold"))
+ return;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk("%s(%d):%s tx_hold()\n",
+ __FILE__,__LINE__,info->device_name);
+
+ spin_lock_irqsave(&info->lock,flags);
+ if (info->tx_enabled)
+ tx_stop(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* release (start) transmitter
+ */
+static void tx_release(struct tty_struct *tty)
+{
+ SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+ unsigned long flags;
+
+ if (sanity_check(info, tty->device, "tx_release"))
+ return;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk("%s(%d):%s tx_release()\n",
+ __FILE__,__LINE__,info->device_name);
+
+ spin_lock_irqsave(&info->lock,flags);
+ if (!info->tx_enabled)
+ tx_start(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* Service an IOCTL request
+ *
+ * Arguments:
+ *
+ * tty pointer to tty instance data
+ * file pointer to associated file object for device
+ * cmd IOCTL command code
+ * arg command argument/context
+ *
+ * Return Value: 0 if success, otherwise error code
+ */
+static int ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+ int error;
+ struct mgsl_icount cnow; /* kernel counter temps */
+ struct serial_icounter_struct *p_cuser; /* user space */
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
+ info->device_name, cmd );
+
+ if (sanity_check(info, tty->device, "ioctl"))
+ return -ENODEV;
+
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+ (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ }
+
+ switch (cmd) {
+ case TIOCMGET:
+ return get_modem_info(info, (unsigned int *) arg);
+ case TIOCMBIS:
+ case TIOCMBIC:
+ case TIOCMSET:
+ return set_modem_info(info, cmd, (unsigned int *) arg);
+ case MGSL_IOCGPARAMS:
+ return get_params(info,(MGSL_PARAMS *)arg);
+ case MGSL_IOCSPARAMS:
+ return set_params(info,(MGSL_PARAMS *)arg);
+ case MGSL_IOCGTXIDLE:
+ return get_txidle(info,(int*)arg);
+ case MGSL_IOCSTXIDLE:
+ return set_txidle(info,(int)arg);
+ case MGSL_IOCTXENABLE:
+ return tx_enable(info,(int)arg);
+ case MGSL_IOCRXENABLE:
+ return rx_enable(info,(int)arg);
+ case MGSL_IOCTXABORT:
+ return tx_abort(info);
+ case MGSL_IOCGSTATS:
+ return get_stats(info,(struct mgsl_icount*)arg);
+ case MGSL_IOCWAITEVENT:
+ return wait_mgsl_event(info,(int*)arg);
+ case MGSL_IOCLOOPTXDONE:
+ return 0; // TODO: Not supported, need to document
+ case MGSL_IOCCLRMODCOUNT:
+ while(MOD_IN_USE)
+ MOD_DEC_USE_COUNT;
+ return 0;
+ /* Wait for modem input (DCD,RI,DSR,CTS) change
+ * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
+ */
+ case TIOCMIWAIT:
+ return modem_input_wait(info,(int)arg);
+
+ /*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+ case TIOCGICOUNT:
+ spin_lock_irqsave(&info->lock,flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->lock,flags);
+ p_cuser = (struct serial_icounter_struct *) arg;
+ PUT_USER(error,cnow.cts, &p_cuser->cts);
+ if (error) return error;
+ PUT_USER(error,cnow.dsr, &p_cuser->dsr);
+ if (error) return error;
+ PUT_USER(error,cnow.rng, &p_cuser->rng);
+ if (error) return error;
+ PUT_USER(error,cnow.dcd, &p_cuser->dcd);
+ if (error) return error;
+ PUT_USER(error,cnow.rx, &p_cuser->rx);
+ if (error) return error;
+ PUT_USER(error,cnow.tx, &p_cuser->tx);
+ if (error) return error;
+ PUT_USER(error,cnow.frame, &p_cuser->frame);
+ if (error) return error;
+ PUT_USER(error,cnow.overrun, &p_cuser->overrun);
+ if (error) return error;
+ PUT_USER(error,cnow.parity, &p_cuser->parity);
+ if (error) return error;
+ PUT_USER(error,cnow.brk, &p_cuser->brk);
+ if (error) return error;
+ PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
+ if (error) return error;
+ return 0;
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+/*
+ * /proc fs routines....
+ */
+
+static inline int line_info(char *buf, SLMP_INFO *info)
+{
+ char stat_buf[30];
+ int ret;
+ unsigned long flags;
+
+ ret = sprintf(buf, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
+ "\tIRQ=%d MaxFrameSize=%u\n",
+ info->device_name,
+ info->phys_sca_base,
+ info->phys_memory_base,
+ info->phys_statctrl_base,
+ info->phys_lcr_base,
+ info->irq_level,
+ info->max_frame_size );
+
+ /* output current serial signal states */
+ spin_lock_irqsave(&info->lock,flags);
+ get_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ stat_buf[0] = 0;
+ stat_buf[1] = 0;
+ if (info->serial_signals & SerialSignal_RTS)
+ strcat(stat_buf, "|RTS");
+ if (info->serial_signals & SerialSignal_CTS)
+ strcat(stat_buf, "|CTS");
+ if (info->serial_signals & SerialSignal_DTR)
+ strcat(stat_buf, "|DTR");
+ if (info->serial_signals & SerialSignal_DSR)
+ strcat(stat_buf, "|DSR");
+ if (info->serial_signals & SerialSignal_DCD)
+ strcat(stat_buf, "|CD");
+ if (info->serial_signals & SerialSignal_RI)
+ strcat(stat_buf, "|RI");
+
+ if (info->params.mode == MGSL_MODE_HDLC) {
+ ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d",
+ info->icount.txok, info->icount.rxok);
+ if (info->icount.txunder)
+ ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
+ if (info->icount.txabort)
+ ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
+ if (info->icount.rxshort)
+ ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
+ if (info->icount.rxlong)
+ ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
+ if (info->icount.rxover)
+ ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
+ if (info->icount.rxcrc)
+ ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxcrc);
+ } else {
+ ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d",
+ info->icount.tx, info->icount.rx);
+ if (info->icount.frame)
+ ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
+ if (info->icount.parity)
+ ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
+ if (info->icount.brk)
+ ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
+ if (info->icount.overrun)
+ ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
+ }
+
+ /* Append serial signal status to end */
+ ret += sprintf(buf+ret, " %s\n", stat_buf+1);
+
+ ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
+ info->tx_active,info->bh_requested,info->bh_running,
+ info->pending_bh);
+
+ return ret;
+}
+
+/* Called to print information about devices
+ */
+int read_proc(char *page, char **start, off_t off, int count,
+ int *eof, void *data)
+{
+ int len = 0, l;
+ off_t begin = 0;
+ SLMP_INFO *info;
+
+ len += sprintf(page, "synclinkmp driver:%s\n", driver_version);
+
+ info = synclinkmp_device_list;
+ while( info ) {
+ l = line_info(page + len, info);
+ len += l;
+ if (len+begin > off+count)
+ goto done;
+ if (len+begin < off) {
+ begin += len;
+ len = 0;
+ }
+ info = info->next_device;
+ }
+
+ *eof = 1;
+done:
+ if (off >= len+begin)
+ return 0;
+ *start = page + (off-begin);
+ return ((count < begin+len-off) ? count : begin+len-off);
+}
+
+/* Return the count of bytes in transmit buffer
+ */
+static int chars_in_buffer(struct tty_struct *tty)
+{
+ SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+
+ if (sanity_check(info, tty->device, "chars_in_buffer"))
+ return 0;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s chars_in_buffer()=%d\n",
+ __FILE__, __LINE__, info->device_name, info->tx_count);
+
+ return info->tx_count;
+}
+
+/* Signal remote device to throttle send data (our receive data)
+ */
+static void throttle(struct tty_struct * tty)
+{
+ SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s throttle() entry\n",
+ __FILE__,__LINE__, info->device_name );
+
+ if (sanity_check(info, tty->device, "throttle"))
+ return;
+
+ if (I_IXOFF(tty))
+ send_xchar(tty, STOP_CHAR(tty));
+
+ if (tty->termios->c_cflag & CRTSCTS) {
+ spin_lock_irqsave(&info->lock,flags);
+ info->serial_signals &= ~SerialSignal_RTS;
+ set_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+}
+
+/* Signal remote device to stop throttling send data (our receive data)
+ */
+static void unthrottle(struct tty_struct * tty)
+{
+ SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s unthrottle() entry\n",
+ __FILE__,__LINE__, info->device_name );
+
+ if (sanity_check(info, tty->device, "unthrottle"))
+ return;
+
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ send_xchar(tty, START_CHAR(tty));
+ }
+
+ if (tty->termios->c_cflag & CRTSCTS) {
+ spin_lock_irqsave(&info->lock,flags);
+ info->serial_signals |= SerialSignal_RTS;
+ set_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+}
+
+/* set or clear transmit break condition
+ * break_state -1=set break condition, 0=clear
+ */
+static void set_break(struct tty_struct *tty, int break_state)
+{
+ unsigned char RegValue;
+ SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s set_break(%d)\n",
+ __FILE__,__LINE__, info->device_name, break_state);
+
+ if (sanity_check(info, tty->device, "set_break"))
+ return;
+
+ spin_lock_irqsave(&info->lock,flags);
+ RegValue = read_reg(info, CTL);
+ if (break_state == -1)
+ RegValue |= BIT3;
+ else
+ RegValue &= ~BIT3;
+ write_reg(info, CTL, RegValue);
+ spin_unlock_irqrestore(&info->lock,flags);
+}
+
+#ifdef CONFIG_SYNCLINK_SYNCPPP
+
+/* syncppp support and callbacks */
+
+static void sppp_init(SLMP_INFO *info)
+{
+ struct net_device *d;
+
+ sprintf(info->netname,"mgslm%dp%d",info->adapter_num,info->port_num);
+
+ info->if_ptr = &info->pppdev;
+ info->netdev = info->pppdev.dev = &info->netdevice;
+
+ sppp_attach(&info->pppdev);
+
+ d = info->netdev;
+ strcpy(d->name,info->netname);
+ d->base_addr = 0;
+ d->irq = info->irq_level;
+ d->dma = 0;
+ d->priv = info;
+ d->init = NULL;
+ d->open = sppp_cb_open;
+ d->stop = sppp_cb_close;
+ d->hard_start_xmit = sppp_cb_tx;
+ d->do_ioctl = sppp_cb_ioctl;
+ d->get_stats = sppp_cb_net_stats;
+ d->tx_timeout = sppp_cb_tx_timeout;
+ d->watchdog_timeo = 10*HZ;
+
+#if LINUX_VERSION_CODE < VERSION(2,4,4)
+ dev_init_buffers(d);
+#endif
+
+ if (register_netdev(d) == -1) {
+ printk(KERN_WARNING "%s: register_netdev failed.\n", d->name);
+ sppp_detach(info->netdev);
+ return;
+ }
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("sppp_init(%s)\n",info->netname);
+}
+
+static void sppp_delete(SLMP_INFO *info)
+{
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("sppp_delete(%s)\n",info->netname);
+ sppp_detach(info->netdev);
+ unregister_netdev(info->netdev);
+}
+
+static int sppp_cb_open(struct net_device *d)
+{
+ SLMP_INFO *info = d->priv;
+ int err, flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("sppp_cb_open(%s)\n",info->netname);
+
+ spin_lock_irqsave(&info->netlock, flags);
+ if (info->count != 0 || info->netcount != 0) {
+ printk(KERN_WARNING "%s: sppp_cb_open returning busy\n", info->netname);
+ spin_unlock_irqrestore(&info->netlock, flags);
+ return -EBUSY;
+ }
+ info->netcount=1;
+ MOD_INC_USE_COUNT;
+ spin_unlock_irqrestore(&info->netlock, flags);
+
+ /* claim resources and init adapter */
+ if ((err = startup(info)) != 0)
+ goto open_fail;
+
+ /* allow syncppp module to do open processing */
+ if ((err = sppp_open(d)) != 0) {
+ shutdown(info);
+ goto open_fail;
+ }
+
+ info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ program_hw(info);
+
+ d->trans_start = jiffies;
+ netif_start_queue(d);
+ return 0;
+
+open_fail:
+ spin_lock_irqsave(&info->netlock, flags);
+ info->netcount=0;
+ MOD_DEC_USE_COUNT;
+ spin_unlock_irqrestore(&info->netlock, flags);
+ return err;
+}
+
+static void sppp_cb_tx_timeout(struct net_device *dev)
+{
+ SLMP_INFO *info = dev->priv;
+ int flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("sppp_tx_timeout(%s)\n",info->netname);
+
+ info->netstats.tx_errors++;
+ info->netstats.tx_aborted_errors++;
+
+ spin_lock_irqsave(&info->lock,flags);
+ tx_stop(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ netif_wake_queue(dev);
+}
+
+static int sppp_cb_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ SLMP_INFO *info = dev->priv;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("sppp_tx(%s)\n",info->netname);
+
+ netif_stop_queue(dev);
+
+ info->tx_count = skb->len;
+ tx_load_dma_buffer(info, skb->data, skb->len);
+ info->netstats.tx_packets++;
+ info->netstats.tx_bytes += skb->len;
+ dev_kfree_skb(skb);
+
+ dev->trans_start = jiffies;
+
+ spin_lock_irqsave(&info->lock,flags);
+ if (!info->tx_active)
+ tx_start(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ return 0;
+}
+
+static int sppp_cb_close(struct net_device *d)
+{
+ SLMP_INFO *info = d->priv;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("sppp_cb_close(%s)\n",info->netname);
+
+ /* shutdown adapter and release resources */
+ shutdown(info);
+
+ /* allow syncppp to do close processing */
+ sppp_close(d);
+ netif_stop_queue(d);
+
+ spin_lock_irqsave(&info->netlock, flags);
+ info->netcount=0;
+ MOD_DEC_USE_COUNT;
+ spin_unlock_irqrestore(&info->netlock, flags);
+ return 0;
+}
+
+static void sppp_rx_done(SLMP_INFO *info, char *buf, int size)
+{
+ struct sk_buff *skb = dev_alloc_skb(size);
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("sppp_rx_done(%s)\n",info->netname);
+ if (skb == NULL) {
+ printk(KERN_NOTICE "%s: cant alloc skb, dropping packet\n",
+ info->netname);
+ info->netstats.rx_dropped++;
+ return;
+ }
+
+ memcpy(skb_put(skb, size),buf,size);
+
+ skb->protocol = htons(ETH_P_WAN_PPP);
+ skb->dev = info->netdev;
+ skb->mac.raw = skb->data;
+ info->netstats.rx_packets++;
+ info->netstats.rx_bytes += size;
+ netif_rx(skb);
+ info->netdev->trans_start = jiffies;
+}
+
+static void sppp_tx_done(SLMP_INFO *info)
+{
+ if (netif_queue_stopped(info->netdev))
+ netif_wake_queue(info->netdev);
+}
+
+static struct net_device_stats *sppp_cb_net_stats(struct net_device *dev)
+{
+ SLMP_INFO *info = dev->priv;
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("net_stats(%s)\n",info->netname);
+ return &info->netstats;
+}
+
+static int sppp_cb_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ SLMP_INFO *info = (SLMP_INFO *)dev->priv;
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):ioctl %s cmd=%08X\n", __FILE__,__LINE__,
+ info->netname, cmd );
+ return sppp_do_ioctl(dev, ifr, cmd);
+}
+
+#endif /* ifdef CONFIG_SYNCLINK_SYNCPPP */
+
+
+/* Return next bottom half action to perform.
+ * Return Value: BH action code or 0 if nothing to do.
+ */
+int bh_action(SLMP_INFO *info)
+{
+ unsigned long flags;
+ int rc = 0;
+
+ spin_lock_irqsave(&info->lock,flags);
+
+ if (info->pending_bh & BH_RECEIVE) {
+ info->pending_bh &= ~BH_RECEIVE;
+ rc = BH_RECEIVE;
+ } else if (info->pending_bh & BH_TRANSMIT) {
+ info->pending_bh &= ~BH_TRANSMIT;
+ rc = BH_TRANSMIT;
+ } else if (info->pending_bh & BH_STATUS) {
+ info->pending_bh &= ~BH_STATUS;
+ rc = BH_STATUS;
+ }
+
+ if (!rc) {
+ /* Mark BH routine as complete */
+ info->bh_running = 0;
+ info->bh_requested = 0;
+ }
+
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ return rc;
+}
+
+/* Perform bottom half processing of work items queued by ISR.
+ */
+void bh_handler(void* Context)
+{
+ SLMP_INFO *info = (SLMP_INFO*)Context;
+ int action;
+
+ if (!info)
+ return;
+
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk( "%s(%d):%s bh_handler() entry\n",
+ __FILE__,__LINE__,info->device_name);
+
+ info->bh_running = 1;
+
+ while((action = bh_action(info)) != 0) {
+
+ /* Process work item */
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk( "%s(%d):%s bh_handler() work item action=%d\n",
+ __FILE__,__LINE__,info->device_name, action);
+
+ switch (action) {
+
+ case BH_RECEIVE:
+ bh_receive(info);
+ break;
+ case BH_TRANSMIT:
+ bh_transmit(info);
+ break;
+ case BH_STATUS:
+ bh_status(info);
+ break;
+ default:
+ /* unknown work item ID */
+ printk("%s(%d):%s Unknown work item ID=%08X!\n",
+ __FILE__,__LINE__,info->device_name,action);
+ break;
+ }
+ }
+
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk( "%s(%d):%s bh_handler() exit\n",
+ __FILE__,__LINE__,info->device_name);
+}
+
+void bh_receive(SLMP_INFO *info)
+{
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk( "%s(%d):%s bh_receive()\n",
+ __FILE__,__LINE__,info->device_name);
+
+ while( rx_get_frame(info) );
+}
+
+void bh_transmit(SLMP_INFO *info)
+{
+ struct tty_struct *tty = info->tty;
+
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk( "%s(%d):%s bh_transmit() entry\n",
+ __FILE__,__LINE__,info->device_name);
+
+ if (tty) {
+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+ tty->ldisc.write_wakeup) {
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk( "%s(%d):%s calling ldisc.write_wakeup\n",
+ __FILE__,__LINE__,info->device_name);
+ (tty->ldisc.write_wakeup)(tty);
+ }
+ wake_up_interruptible(&tty->write_wait);
+ }
+}
+
+void bh_status(SLMP_INFO *info)
+{
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk( "%s(%d):%s bh_status() entry\n",
+ __FILE__,__LINE__,info->device_name);
+
+ info->ri_chkcount = 0;
+ info->dsr_chkcount = 0;
+ info->dcd_chkcount = 0;
+ info->cts_chkcount = 0;
+}
+
+void isr_timer(SLMP_INFO * info)
+{
+ unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
+
+ /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
+ write_reg(info, IER2, 0);
+
+ /* TMCS, Timer Control/Status Register
+ *
+ * 07 CMF, Compare match flag (read only) 1=match
+ * 06 ECMI, CMF Interrupt Enable: 0=disabled
+ * 05 Reserved, must be 0
+ * 04 TME, Timer Enable
+ * 03..00 Reserved, must be 0
+ *
+ * 0000 0000
+ */
+ write_reg(info, (unsigned char)(timer + TMCS), 0);
+
+ info->irq_occurred = TRUE;
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s isr_timer()\n",
+ __FILE__,__LINE__,info->device_name);
+}
+
+void isr_rxint(SLMP_INFO * info)
+{
+ struct tty_struct *tty = info->tty;
+ struct mgsl_icount *icount = &info->icount;
+ unsigned char status = read_reg(info, SR1);
+ unsigned char status2 = read_reg(info, SR2);
+
+ /* clear status bits */
+ if ( status & (FLGD + IDLD + CDCD + BRKD) )
+ write_reg(info, SR1,
+ (unsigned char)(status & (FLGD + IDLD + CDCD + BRKD)));
+
+ if ( status2 & OVRN )
+ write_reg(info, SR2, (unsigned char)(status2 & OVRN));
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s isr_rxint status=%02X %02x\n",
+ __FILE__,__LINE__,info->device_name,status,status2);
+
+ if (info->params.mode == MGSL_MODE_ASYNC) {
+ if (status & BRKD) {
+ icount->brk++;
+
+ /* process break detection if tty control
+ * is not set to ignore it
+ */
+ if ( tty ) {
+ if (!(status & info->ignore_status_mask1)) {
+ if (info->read_status_mask1 & BRKD) {
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ if (info->flags & ASYNC_SAK)
+ do_SAK(tty);
+ }
+ }
+ }
+ }
+ }
+ else {
+ if (status & (FLGD|IDLD)) {
+ if (status & FLGD)
+ info->icount.exithunt++;
+ else if (status & IDLD)
+ info->icount.rxidle++;
+ wake_up_interruptible(&info->event_wait_q);
+ }
+ }
+
+ if (status & CDCD) {
+ /* simulate a common modem status change interrupt
+ * for our handler
+ */
+ get_signals( info );
+ isr_io_pin(info,
+ MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
+ }
+}
+
+/*
+ * handle async rx data interrupts
+ */
+void isr_rxrdy(SLMP_INFO * info)
+{
+ u16 status;
+ unsigned char DataByte;
+ struct tty_struct *tty = info->tty;
+ struct mgsl_icount *icount = &info->icount;
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s isr_rxrdy\n",
+ __FILE__,__LINE__,info->device_name);
+
+ while((status = read_reg(info,CST0)) & BIT0)
+ {
+ DataByte = read_reg(info,TRB);
+
+ if ( tty ) {
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ continue;
+
+ *tty->flip.char_buf_ptr = DataByte;
+ *tty->flip.flag_buf_ptr = 0;
+ }
+
+ icount->rx++;
+
+ if ( status & (PE + FRME + OVRN) ) {
+ printk("%s(%d):%s rxerr=%04X\n",
+ __FILE__,__LINE__,info->device_name,status);
+
+ /* update error statistics */
+ if (status & PE)
+ icount->parity++;
+ else if (status & FRME)
+ icount->frame++;
+ else if (status & OVRN)
+ icount->overrun++;
+
+ /* discard char if tty control flags say so */
+ if (status & info->ignore_status_mask2)
+ continue;
+
+ status &= info->read_status_mask2;
+
+ if ( tty ) {
+ if (status & PE)
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ else if (status & FRME)
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+ if (status & OVRN) {
+ /* Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ if (tty->flip.count < TTY_FLIPBUF_SIZE) {
+ tty->flip.count++;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ }
+ }
+ }
+ } /* end of if (error) */
+
+ if ( tty ) {
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ }
+
+ if ( debug_level >= DEBUG_LEVEL_ISR ) {
+ printk("%s(%d):%s isr_rxrdy() flip count=%d\n",
+ __FILE__,__LINE__,info->device_name,
+ tty ? tty->flip.count : 0);
+ printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
+ __FILE__,__LINE__,info->device_name,
+ icount->rx,icount->brk,icount->parity,
+ icount->frame,icount->overrun);
+ }
+
+ if ( tty && tty->flip.count )
+ tty_flip_buffer_push(tty);
+}
+
+void isr_txeom(SLMP_INFO * info, unsigned char status)
+{
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s isr_txeom status=%02x\n",
+ __FILE__,__LINE__,info->device_name,status);
+
+ /* disable and clear MSCI interrupts */
+ info->ie1_value &= ~(IDLE + UDRN);
+ write_reg(info, IE1, info->ie1_value);
+ write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
+
+ write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
+ write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
+ write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
+
+ if ( info->tx_active ) {
+ if (info->params.mode != MGSL_MODE_ASYNC) {
+ if (status & UDRN)
+ info->icount.txunder++;
+ else if (status & IDLE)
+ info->icount.txok++;
+ }
+
+ info->tx_active = 0;
+ info->tx_count = info->tx_put = info->tx_get = 0;
+
+ del_timer(&info->tx_timer);
+
+ if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
+ info->serial_signals &= ~SerialSignal_RTS;
+ info->drop_rts_on_tx_done = 0;
+ set_signals(info);
+ }
+
+#ifdef CONFIG_SYNCLINK_SYNCPPP
+ if (info->netcount)
+ sppp_tx_done(info);
+ else
+#endif
+ {
+ if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
+ tx_stop(info);
+ return;
+ }
+ info->pending_bh |= BH_TRANSMIT;
+ }
+ }
+}
+
+
+/*
+ * handle tx status interrupts
+ */
+void isr_txint(SLMP_INFO * info)
+{
+ unsigned char status = read_reg(info, SR1);
+
+ /* clear status bits */
+ write_reg(info, SR1, (unsigned char)(status & (UDRN + IDLE + CCTS)));
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s isr_txint status=%02x\n",
+ __FILE__,__LINE__,info->device_name,status);
+
+ if (status & (UDRN + IDLE))
+ isr_txeom(info, status);
+
+ if (status & CCTS) {
+ /* simulate a common modem status change interrupt
+ * for our handler
+ */
+ get_signals( info );
+ isr_io_pin(info,
+ MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
+
+ }
+}
+
+/*
+ * handle async tx data interrupts
+ */
+void isr_txrdy(SLMP_INFO * info)
+{
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
+ __FILE__,__LINE__,info->device_name,info->tx_count);
+
+ if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
+ tx_stop(info);
+ return;
+ }
+
+ if ( info->tx_count )
+ tx_load_fifo( info );
+ else {
+ info->tx_active = 0;
+ info->ie0_value &= ~TXRDYE;
+ write_reg(info, IE0, info->ie0_value);
+ }
+
+ if (info->tx_count < WAKEUP_CHARS)
+ info->pending_bh |= BH_TRANSMIT;
+}
+
+void isr_rxdmaok(SLMP_INFO * info)
+{
+ /* BIT7 = EOT (end of transfer)
+ * BIT6 = EOM (end of message/frame)
+ */
+ unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
+
+ /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
+ write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
+ __FILE__,__LINE__,info->device_name,status);
+
+ info->pending_bh |= BH_RECEIVE;
+}
+
+void isr_rxdmaerror(SLMP_INFO * info)
+{
+ /* BIT5 = BOF (buffer overflow)
+ * BIT4 = COF (counter overflow)
+ */
+ unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
+
+ /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
+ write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
+ __FILE__,__LINE__,info->device_name,status);
+
+ info->rx_overflow = TRUE;
+ info->pending_bh |= BH_RECEIVE;
+}
+
+void isr_txdmaok(SLMP_INFO * info)
+{
+ /* BIT7 = EOT (end of transfer, used for async mode)
+ * BIT6 = EOM (end of message/frame, used for sync mode)
+ *
+ * We don't look at DMA status because only EOT is enabled
+ * and we always clear and disable all tx DMA IRQs.
+ */
+// unsigned char dma_status = read_reg(info,TXDMA + DSR) & 0xc0;
+ unsigned char status_reg1 = read_reg(info, SR1);
+
+ write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
+ write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
+ write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
+ __FILE__,__LINE__,info->device_name,status_reg1);
+
+ /* If transmitter already idle, do end of frame processing,
+ * otherwise enable interrupt for tx IDLE.
+ */
+ if (status_reg1 & IDLE)
+ isr_txeom(info, IDLE);
+ else {
+ /* disable and clear underrun IRQ, enable IDLE interrupt */
+ info->ie1_value |= IDLE;
+ info->ie1_value &= ~UDRN;
+ write_reg(info, IE1, info->ie1_value);
+
+ write_reg(info, SR1, UDRN);
+ }
+}
+
+void isr_txdmaerror(SLMP_INFO * info)
+{
+ /* BIT5 = BOF (buffer overflow)
+ * BIT4 = COF (counter overflow)
+ */
+ unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
+
+ /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
+ write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
+ __FILE__,__LINE__,info->device_name,status);
+}
+
+/* handle input serial signal changes
+ */
+void isr_io_pin( SLMP_INFO *info, u16 status )
+{
+ struct mgsl_icount *icount;
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):isr_io_pin status=%04X\n",
+ __FILE__,__LINE__,status);
+
+ if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
+ MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
+ icount = &info->icount;
+ /* update input line counters */
+ if (status & MISCSTATUS_RI_LATCHED) {
+ icount->rng++;
+ if ( status & SerialSignal_RI )
+ info->input_signal_events.ri_up++;
+ else
+ info->input_signal_events.ri_down++;
+ }
+ if (status & MISCSTATUS_DSR_LATCHED) {
+ icount->dsr++;
+ if ( status & SerialSignal_DSR )
+ info->input_signal_events.dsr_up++;
+ else
+ info->input_signal_events.dsr_down++;
+ }
+ if (status & MISCSTATUS_DCD_LATCHED) {
+ if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
+ info->ie1_value &= ~CDCD;
+ write_reg(info, IE1, info->ie1_value);
+ }
+ icount->dcd++;
+ if (status & SerialSignal_DCD) {
+ info->input_signal_events.dcd_up++;
+#ifdef CONFIG_SYNCLINK_SYNCPPP
+ if (info->netcount)
+ sppp_reopen(info->netdev);
+#endif
+ } else
+ info->input_signal_events.dcd_down++;
+ }
+ if (status & MISCSTATUS_CTS_LATCHED)
+ {
+ if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
+ info->ie1_value &= ~CCTS;
+ write_reg(info, IE1, info->ie1_value);
+ }
+ icount->cts++;
+ if ( status & SerialSignal_CTS )
+ info->input_signal_events.cts_up++;
+ else
+ info->input_signal_events.cts_down++;
+ }
+ wake_up_interruptible(&info->status_event_wait_q);
+ wake_up_interruptible(&info->event_wait_q);
+
+ if ( (info->flags & ASYNC_CHECK_CD) &&
+ (status & MISCSTATUS_DCD_LATCHED) ) {
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s CD now %s...", info->device_name,
+ (status & SerialSignal_DCD) ? "on" : "off");
+ if (status & SerialSignal_DCD)
+ wake_up_interruptible(&info->open_wait);
+ else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) &&
+ (info->flags & ASYNC_CALLOUT_NOHUP))) {
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("doing serial hangup...");
+ if (info->tty)
+ tty_hangup(info->tty);
+ }
+ }
+
+ if ( (info->flags & ASYNC_CTS_FLOW) &&
+ (status & MISCSTATUS_CTS_LATCHED) ) {
+ if ( info->tty ) {
+ if (info->tty->hw_stopped) {
+ if (status & SerialSignal_CTS) {
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("CTS tx start...");
+ info->tty->hw_stopped = 0;
+ tx_start(info);
+ info->pending_bh |= BH_TRANSMIT;
+ return;
+ }
+ } else {
+ if (!(status & SerialSignal_CTS)) {
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("CTS tx stop...");
+ info->tty->hw_stopped = 1;
+ tx_stop(info);
+ }
+ }
+ }
+ }
+ }
+
+ info->pending_bh |= BH_STATUS;
+}
+
+/* Interrupt service routine entry point.
+ *
+ * Arguments:
+ * irq interrupt number that caused interrupt
+ * dev_id device ID supplied during interrupt registration
+ * regs interrupted processor context
+ */
+static void synclinkmp_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+ SLMP_INFO * info;
+ unsigned char status, status0, status1=0;
+ unsigned char dmastatus, dmastatus0, dmastatus1=0;
+ unsigned char timerstatus0, timerstatus1=0;
+ unsigned char shift;
+ unsigned int i;
+ unsigned short tmp;
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d): synclinkmp_interrupt(%d)entry.\n",
+ __FILE__,__LINE__,irq);
+
+ info = (SLMP_INFO *)dev_id;
+ if (!info)
+ return;
+
+ spin_lock(&info->lock);
+
+ for(;;) {
+
+ /* get status for SCA0 (ports 0-1) */
+ tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */
+ status0 = (unsigned char)tmp;
+ dmastatus0 = (unsigned char)(tmp>>8);
+ timerstatus0 = read_reg(info, ISR2);
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
+ __FILE__,__LINE__,info->device_name,
+ status0,dmastatus0,timerstatus0);
+
+ if (info->port_count == 4) {
+ /* get status for SCA1 (ports 2-3) */
+ tmp = read_reg16(info->port_array[2], ISR0);
+ status1 = (unsigned char)tmp;
+ dmastatus1 = (unsigned char)(tmp>>8);
+ timerstatus1 = read_reg(info->port_array[2], ISR2);
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
+ __FILE__,__LINE__,info->device_name,
+ status1,dmastatus1,timerstatus1);
+ }
+
+ if (!status0 && !dmastatus0 && !timerstatus0 &&
+ !status1 && !dmastatus1 && !timerstatus1)
+ break;
+
+ for(i=0; i < info->port_count ; i++) {
+ if (info->port_array[i] == NULL)
+ continue;
+ if (i < 2) {
+ status = status0;
+ dmastatus = dmastatus0;
+ } else {
+ status = status1;
+ dmastatus = dmastatus1;
+ }
+
+ shift = i & 1 ? 4 :0;
+
+ if (status & BIT0 << shift)
+ isr_rxrdy(info->port_array[i]);
+ if (status & BIT1 << shift)
+ isr_txrdy(info->port_array[i]);
+ if (status & BIT2 << shift)
+ isr_rxint(info->port_array[i]);
+ if (status & BIT3 << shift)
+ isr_txint(info->port_array[i]);
+
+ if (dmastatus & BIT0 << shift)
+ isr_rxdmaerror(info->port_array[i]);
+ if (dmastatus & BIT1 << shift)
+ isr_rxdmaok(info->port_array[i]);
+ if (dmastatus & BIT2 << shift)
+ isr_txdmaerror(info->port_array[i]);
+ if (dmastatus & BIT3 << shift)
+ isr_txdmaok(info->port_array[i]);
+ }
+
+ if (timerstatus0 & (BIT5 | BIT4))
+ isr_timer(info->port_array[0]);
+ if (timerstatus0 & (BIT7 | BIT6))
+ isr_timer(info->port_array[1]);
+ if (timerstatus1 & (BIT5 | BIT4))
+ isr_timer(info->port_array[2]);
+ if (timerstatus1 & (BIT7 | BIT6))
+ isr_timer(info->port_array[3]);
+ }
+
+ for(i=0; i < info->port_count ; i++) {
+ SLMP_INFO * port = info->port_array[i];
+
+ /* Request bottom half processing if there's something
+ * for it to do and the bh is not already running.
+ *
+ * Note: startup adapter diags require interrupts.
+ * do not request bottom half processing if the
+ * device is not open in a normal mode.
+ */
+ if ( port && (port->count || port->netcount) &&
+ port->pending_bh && !port->bh_running &&
+ !port->bh_requested ) {
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s queueing bh task.\n",
+ __FILE__,__LINE__,port->device_name);
+ queue_task(&port->task, &tq_immediate);
+ mark_bh(IMMEDIATE_BH);
+ port->bh_requested = 1;
+ }
+ }
+
+ spin_unlock(&info->lock);
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):synclinkmp_interrupt(%d)exit.\n",
+ __FILE__,__LINE__,irq);
+}
+
+/* Initialize and start device.
+ */
+static int startup(SLMP_INFO * info)
+{
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
+
+ if (info->flags & ASYNC_INITIALIZED)
+ return 0;
+
+ if (!info->tx_buf) {
+ info->tx_buf = (unsigned char *)kmalloc(info->max_frame_size, GFP_KERNEL);
+ if (!info->tx_buf) {
+ printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
+ __FILE__,__LINE__,info->device_name);
+ return -ENOMEM;
+ }
+ }
+
+ info->pending_bh = 0;
+
+ init_timer(&info->tx_timer);
+ info->tx_timer.data = (unsigned long)info;
+ info->tx_timer.function = tx_timeout;
+
+ /* program hardware for current parameters */
+ reset_port(info);
+
+ change_params(info);
+
+ init_timer(&info->status_timer);
+ info->status_timer.data = (unsigned long)info;
+ info->status_timer.function = status_timeout;
+ info->status_timer.expires = jiffies + jiffies_from_ms(10);
+ add_timer(&info->status_timer);
+
+ if (info->tty)
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->flags |= ASYNC_INITIALIZED;
+
+ return 0;
+}
+
+/* Called by close() and hangup() to shutdown hardware
+ */
+static void shutdown(SLMP_INFO * info)
+{
+ unsigned long flags;
+
+ if (!(info->flags & ASYNC_INITIALIZED))
+ return;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s synclinkmp_shutdown()\n",
+ __FILE__,__LINE__, info->device_name );
+
+ /* clear status wait queue because status changes */
+ /* can't happen after shutting down the hardware */
+ wake_up_interruptible(&info->status_event_wait_q);
+ wake_up_interruptible(&info->event_wait_q);
+
+ del_timer(&info->tx_timer);
+ del_timer(&info->status_timer);
+
+ if (info->tx_buf) {
+ free_page((unsigned long) info->tx_buf);
+ info->tx_buf = 0;
+ }
+
+ spin_lock_irqsave(&info->lock,flags);
+
+ reset_port(info);
+
+ if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
+ info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+ set_signals(info);
+ }
+
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->flags &= ~ASYNC_INITIALIZED;
+}
+
+static void program_hw(SLMP_INFO *info)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->lock,flags);
+
+ rx_stop(info);
+ tx_stop(info);
+
+ info->tx_count = info->tx_put = info->tx_get = 0;
+
+ if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
+ hdlc_mode(info);
+ else
+ async_mode(info);
+
+ set_signals(info);
+
+ info->dcd_chkcount = 0;
+ info->cts_chkcount = 0;
+ info->ri_chkcount = 0;
+ info->dsr_chkcount = 0;
+
+ info->ie1_value |= (CDCD|CCTS);
+ write_reg(info, IE1, info->ie1_value);
+
+ get_signals(info);
+
+ if (info->netcount || (info->tty && info->tty->termios->c_cflag & CREAD) )
+ rx_start(info);
+
+ spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* Reconfigure adapter based on new parameters
+ */
+static void change_params(SLMP_INFO *info)
+{
+ unsigned cflag;
+ int bits_per_char;
+
+ if (!info->tty || !info->tty->termios)
+ return;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s change_params()\n",
+ __FILE__,__LINE__, info->device_name );
+
+ cflag = info->tty->termios->c_cflag;
+
+ /* if B0 rate (hangup) specified then negate DTR and RTS */
+ /* otherwise assert DTR and RTS */
+ if (cflag & CBAUD)
+ info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ else
+ info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+
+ /* byte size and parity */
+
+ switch (cflag & CSIZE) {
+ case CS5: info->params.data_bits = 5; break;
+ case CS6: info->params.data_bits = 6; break;
+ case CS7: info->params.data_bits = 7; break;
+ case CS8: info->params.data_bits = 8; break;
+ /* Never happens, but GCC is too dumb to figure it out */
+ default: info->params.data_bits = 7; break;
+ }
+
+ if (cflag & CSTOPB)
+ info->params.stop_bits = 2;
+ else
+ info->params.stop_bits = 1;
+
+ info->params.parity = ASYNC_PARITY_NONE;
+ if (cflag & PARENB) {
+ if (cflag & PARODD)
+ info->params.parity = ASYNC_PARITY_ODD;
+ else
+ info->params.parity = ASYNC_PARITY_EVEN;
+#ifdef CMSPAR
+ if (cflag & CMSPAR)
+ info->params.parity = ASYNC_PARITY_SPACE;
+#endif
+ }
+
+ /* calculate number of jiffies to transmit a full
+ * FIFO (32 bytes) at specified data rate
+ */
+ bits_per_char = info->params.data_bits +
+ info->params.stop_bits + 1;
+
+ /* if port data rate is set to 460800 or less then
+ * allow tty settings to override, otherwise keep the
+ * current data rate.
+ */
+ if (info->params.data_rate <= 460800) {
+ info->params.data_rate = tty_get_baud_rate(info->tty);
+ }
+
+ if ( info->params.data_rate ) {
+ info->timeout = (32*HZ*bits_per_char) /
+ info->params.data_rate;
+ }
+ info->timeout += HZ/50; /* Add .02 seconds of slop */
+
+ if (cflag & CRTSCTS)
+ info->flags |= ASYNC_CTS_FLOW;
+ else
+ info->flags &= ~ASYNC_CTS_FLOW;
+
+ if (cflag & CLOCAL)
+ info->flags &= ~ASYNC_CHECK_CD;
+ else
+ info->flags |= ASYNC_CHECK_CD;
+
+ /* process tty input control flags */
+
+ info->read_status_mask2 = OVRN;
+ if (I_INPCK(info->tty))
+ info->read_status_mask2 |= PE | FRME;
+ if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ info->read_status_mask1 |= BRKD;
+ if (I_IGNPAR(info->tty))
+ info->ignore_status_mask2 |= PE | FRME;
+ if (I_IGNBRK(info->tty)) {
+ info->ignore_status_mask1 |= BRKD;
+ /* If ignoring parity and break indicators, ignore
+ * overruns too. (For real raw support).
+ */
+ if (I_IGNPAR(info->tty))
+ info->ignore_status_mask2 |= OVRN;
+ }
+
+ program_hw(info);
+}
+
+static int get_stats(SLMP_INFO * info, struct mgsl_icount *user_icount)
+{
+ int err;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s get_params()\n",
+ __FILE__,__LINE__, info->device_name);
+
+ COPY_TO_USER(err,user_icount, &info->icount, sizeof(struct mgsl_icount));
+ if (err) {
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):%s get_stats() user buffer copy failed\n",
+ __FILE__,__LINE__,info->device_name);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int get_params(SLMP_INFO * info, MGSL_PARAMS *user_params)
+{
+ int err;
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s get_params()\n",
+ __FILE__,__LINE__, info->device_name);
+
+ COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
+ if (err) {
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):%s get_params() user buffer copy failed\n",
+ __FILE__,__LINE__,info->device_name);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int set_params(SLMP_INFO * info, MGSL_PARAMS *new_params)
+{
+ unsigned long flags;
+ MGSL_PARAMS tmp_params;
+ int err;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s set_params\n",
+ __FILE__,__LINE__,info->device_name );
+ COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
+ if (err) {
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):%s set_params() user buffer copy failed\n",
+ __FILE__,__LINE__,info->device_name);
+ return -EFAULT;
+ }
+
+ spin_lock_irqsave(&info->lock,flags);
+ memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ change_params(info);
+
+ return 0;
+}
+
+static int get_txidle(SLMP_INFO * info, int*idle_mode)
+{
+ int err;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s get_txidle()=%d\n",
+ __FILE__,__LINE__, info->device_name, info->idle_mode);
+
+ COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
+ if (err) {
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
+ __FILE__,__LINE__,info->device_name);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int set_txidle(SLMP_INFO * info, int idle_mode)
+{
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s set_txidle(%d)\n",
+ __FILE__,__LINE__,info->device_name, idle_mode );
+
+ spin_lock_irqsave(&info->lock,flags);
+ info->idle_mode = idle_mode;
+ tx_set_idle( info );
+ spin_unlock_irqrestore(&info->lock,flags);
+ return 0;
+}
+
+static int tx_enable(SLMP_INFO * info, int enable)
+{
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s tx_enable(%d)\n",
+ __FILE__,__LINE__,info->device_name, enable);
+
+ spin_lock_irqsave(&info->lock,flags);
+ if ( enable ) {
+ if ( !info->tx_enabled ) {
+ tx_start(info);
+ }
+ } else {
+ if ( info->tx_enabled )
+ tx_stop(info);
+ }
+ spin_unlock_irqrestore(&info->lock,flags);
+ return 0;
+}
+
+/* abort send HDLC frame
+ */
+static int tx_abort(SLMP_INFO * info)
+{
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s tx_abort()\n",
+ __FILE__,__LINE__,info->device_name);
+
+ spin_lock_irqsave(&info->lock,flags);
+ if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
+ info->ie1_value &= ~UDRN;
+ info->ie1_value |= IDLE;
+ write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
+ write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
+
+ write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
+ write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
+
+ write_reg(info, CMD, TXABORT);
+ }
+ spin_unlock_irqrestore(&info->lock,flags);
+ return 0;
+}
+
+static int rx_enable(SLMP_INFO * info, int enable)
+{
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s rx_enable(%d)\n",
+ __FILE__,__LINE__,info->device_name,enable);
+
+ spin_lock_irqsave(&info->lock,flags);
+ if ( enable ) {
+ if ( !info->rx_enabled )
+ rx_start(info);
+ } else {
+ if ( info->rx_enabled )
+ rx_stop(info);
+ }
+ spin_unlock_irqrestore(&info->lock,flags);
+ return 0;
+}
+
+static int map_status(int signals)
+{
+ /* Map status bits to API event bits */
+
+ return ((signals & SerialSignal_DSR) ? MgslEvent_DsrActive : MgslEvent_DsrInactive) +
+ ((signals & SerialSignal_CTS) ? MgslEvent_CtsActive : MgslEvent_CtsInactive) +
+ ((signals & SerialSignal_DCD) ? MgslEvent_DcdActive : MgslEvent_DcdInactive) +
+ ((signals & SerialSignal_RI) ? MgslEvent_RiActive : MgslEvent_RiInactive);
+}
+
+/* wait for specified event to occur
+ */
+static int wait_mgsl_event(SLMP_INFO * info, int * mask_ptr)
+{
+ unsigned long flags;
+ int s;
+ int rc=0;
+ struct mgsl_icount cprev, cnow;
+ int events;
+ int mask;
+ struct _input_signal_events oldsigs, newsigs;
+ DECLARE_WAITQUEUE(wait, current);
+
+ COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
+ if (rc) {
+ return -EFAULT;
+ }
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s wait_mgsl_event(%d)\n",
+ __FILE__,__LINE__,info->device_name,mask);
+
+ spin_lock_irqsave(&info->lock,flags);
+
+ /* return immediately if state matches requested events */
+ get_signals(info);
+ s = map_status(info->serial_signals);
+
+ events = mask &
+ ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
+ ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
+ ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
+ ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
+ if (events) {
+ spin_unlock_irqrestore(&info->lock,flags);
+ goto exit;
+ }
+
+ /* save current irq counts */
+ cprev = info->icount;
+ oldsigs = info->input_signal_events;
+
+ /* enable hunt and idle irqs if needed */
+ if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
+ unsigned char oldval = info->ie1_value;
+ unsigned char newval = oldval +
+ (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
+ (mask & MgslEvent_IdleReceived ? IDLE:0);
+ if ( oldval != newval ) {
+ info->ie1_value = newval;
+ write_reg(info, IE1, info->ie1_value);
+ }
+ }
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ add_wait_queue(&info->event_wait_q, &wait);
+
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ for(;;) {
+ schedule();
+ if (signal_pending(current)) {
+ rc = -ERESTARTSYS;
+ break;
+ }
+
+ /* get current irq counts */
+ spin_lock_irqsave(&info->lock,flags);
+ cnow = info->icount;
+ newsigs = info->input_signal_events;
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ /* if no change, wait aborted for some reason */
+ if (newsigs.dsr_up == oldsigs.dsr_up &&
+ newsigs.dsr_down == oldsigs.dsr_down &&
+ newsigs.dcd_up == oldsigs.dcd_up &&
+ newsigs.dcd_down == oldsigs.dcd_down &&
+ newsigs.cts_up == oldsigs.cts_up &&
+ newsigs.cts_down == oldsigs.cts_down &&
+ newsigs.ri_up == oldsigs.ri_up &&
+ newsigs.ri_down == oldsigs.ri_down &&
+ cnow.exithunt == cprev.exithunt &&
+ cnow.rxidle == cprev.rxidle) {
+ rc = -EIO;
+ break;
+ }
+
+ events = mask &
+ ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
+ (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
+ (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
+ (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
+ (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
+ (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
+ (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
+ (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
+ (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
+ (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
+ if (events)
+ break;
+
+ cprev = cnow;
+ oldsigs = newsigs;
+ }
+
+ remove_wait_queue(&info->event_wait_q, &wait);
+ set_current_state(TASK_RUNNING);
+
+
+ if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
+ spin_lock_irqsave(&info->lock,flags);
+ if (!waitqueue_active(&info->event_wait_q)) {
+ /* disable enable exit hunt mode/idle rcvd IRQs */
+ info->ie1_value &= ~(FLGD|IDLE);
+ write_reg(info, IE1, info->ie1_value);
+ }
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+exit:
+ if ( rc == 0 )
+ PUT_USER(rc, events, mask_ptr);
+
+ return rc;
+}
+
+static int modem_input_wait(SLMP_INFO *info,int arg)
+{
+ unsigned long flags;
+ int rc;
+ struct mgsl_icount cprev, cnow;
+ DECLARE_WAITQUEUE(wait, current);
+
+ /* save current irq counts */
+ spin_lock_irqsave(&info->lock,flags);
+ cprev = info->icount;
+ add_wait_queue(&info->status_event_wait_q, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ for(;;) {
+ schedule();
+ if (signal_pending(current)) {
+ rc = -ERESTARTSYS;
+ break;
+ }
+
+ /* get new irq counts */
+ spin_lock_irqsave(&info->lock,flags);
+ cnow = info->icount;
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ /* if no change, wait aborted for some reason */
+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
+ rc = -EIO;
+ break;
+ }
+
+ /* check for change in caller specified modem input */
+ if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
+ (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
+ (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
+ (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
+ rc = 0;
+ break;
+ }
+
+ cprev = cnow;
+ }
+ remove_wait_queue(&info->status_event_wait_q, &wait);
+ set_current_state(TASK_RUNNING);
+ return rc;
+}
+
+/* return the state of the serial control and status signals
+ */
+static int get_modem_info(SLMP_INFO * info, unsigned int *value)
+{
+ unsigned int result;
+ unsigned long flags;
+ int err;
+
+ spin_lock_irqsave(&info->lock,flags);
+ get_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
+ ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
+ ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
+ ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
+ ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
+ ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s synclinkmp_get_modem_info() value=%08X\n",
+ __FILE__,__LINE__, info->device_name, result );
+
+ PUT_USER(err,result,value);
+ return err;
+}
+
+/* set modem control signals (DTR/RTS)
+ *
+ * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit
+ * TIOCMSET = set/clear signal values
+ * value bit mask for command
+ */
+static int set_modem_info(SLMP_INFO * info, unsigned int cmd,
+ unsigned int *value)
+{
+ int error;
+ unsigned int arg;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s synclinkmp_set_modem_info()\n",
+ __FILE__,__LINE__,info->device_name );
+
+ GET_USER(error,arg,value);
+ if (error)
+ return error;
+
+ switch (cmd) {
+ case TIOCMBIS:
+ if (arg & TIOCM_RTS)
+ info->serial_signals |= SerialSignal_RTS;
+ if (arg & TIOCM_DTR)
+ info->serial_signals |= SerialSignal_DTR;
+ break;
+ case TIOCMBIC:
+ if (arg & TIOCM_RTS)
+ info->serial_signals &= ~SerialSignal_RTS;
+ if (arg & TIOCM_DTR)
+ info->serial_signals &= ~SerialSignal_DTR;
+ break;
+ case TIOCMSET:
+ if (arg & TIOCM_RTS)
+ info->serial_signals |= SerialSignal_RTS;
+ else
+ info->serial_signals &= ~SerialSignal_RTS;
+
+ if (arg & TIOCM_DTR)
+ info->serial_signals |= SerialSignal_DTR;
+ else
+ info->serial_signals &= ~SerialSignal_DTR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&info->lock,flags);
+ set_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ return 0;
+}
+
+
+
+/* Block the current process until the specified port is ready to open.
+ */
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
+ SLMP_INFO *info)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ int retval;
+ int do_clocal = 0, extra_count = 0;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s block_til_ready()\n",
+ __FILE__,__LINE__, tty->driver.name );
+
+ if (tty->driver.subtype == SERIAL_TYPE_CALLOUT) {
+ /* this is a callout device */
+ /* just verify that normal device is not in use */
+ if (info->flags & ASYNC_NORMAL_ACTIVE)
+ return -EBUSY;
+ if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
+ (info->flags & ASYNC_SESSION_LOCKOUT) &&
+ (info->session != current->session))
+ return -EBUSY;
+ if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
+ (info->flags & ASYNC_PGRP_LOCKOUT) &&
+ (info->pgrp != current->pgrp))
+ return -EBUSY;
+ info->flags |= ASYNC_CALLOUT_ACTIVE;
+ return 0;
+ }
+
+ if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
+ /* nonblock mode is set or port is not enabled */
+ /* just verify that callout device is not active */
+ if (info->flags & ASYNC_CALLOUT_ACTIVE)
+ return -EBUSY;
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (info->flags & ASYNC_CALLOUT_ACTIVE) {
+ if (info->normal_termios.c_cflag & CLOCAL)
+ do_clocal = 1;
+ } else {
+ if (tty->termios->c_cflag & CLOCAL)
+ do_clocal = 1;
+ }
+
+ /* Wait for carrier detect and the line to become
+ * free (i.e., not in use by the callout). While we are in
+ * this loop, info->count is dropped by one, so that
+ * close() knows when to free things. We restore it upon
+ * exit, either normal or abnormal.
+ */
+
+ retval = 0;
+ add_wait_queue(&info->open_wait, &wait);
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s block_til_ready() before block, count=%d\n",
+ __FILE__,__LINE__, tty->driver.name, info->count );
+
+ save_flags(flags); cli();
+ if (!tty_hung_up_p(filp)) {
+ extra_count = 1;
+ info->count--;
+ }
+ restore_flags(flags);
+ info->blocked_open++;
+
+ while (1) {
+ if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
+ (tty->termios->c_cflag & CBAUD)) {
+ spin_lock_irqsave(&info->lock,flags);
+ info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ set_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
+ retval = (info->flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS;
+ break;
+ }
+
+ spin_lock_irqsave(&info->lock,flags);
+ get_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
+ !(info->flags & ASYNC_CLOSING) &&
+ (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
+ break;
+ }
+
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s block_til_ready() count=%d\n",
+ __FILE__,__LINE__, tty->driver.name, info->count );
+
+ schedule();
+ }
+
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&info->open_wait, &wait);
+
+ if (extra_count)
+ info->count++;
+ info->blocked_open--;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s block_til_ready() after, count=%d\n",
+ __FILE__,__LINE__, tty->driver.name, info->count );
+
+ if (!retval)
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+
+ return retval;
+}
+
+int alloc_dma_bufs(SLMP_INFO *info)
+{
+ unsigned short BuffersPerFrame;
+ unsigned short BufferCount;
+
+ // Force allocation to start at 64K boundary for each port.
+ // This is necessary because *all* buffer descriptors for a port
+ // *must* be in the same 64K block. All descriptors on a port
+ // share a common 'base' address (upper 8 bits of 24 bits) programmed
+ // into the CBP register.
+ info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
+
+ /* Calculate the number of DMA buffers necessary to hold the */
+ /* largest allowable frame size. Note: If the max frame size is */
+ /* not an even multiple of the DMA buffer size then we need to */
+ /* round the buffer count per frame up one. */
+
+ BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
+ if ( info->max_frame_size % SCABUFSIZE )
+ BuffersPerFrame++;
+
+ /* calculate total number of data buffers (SCABUFSIZE) possible
+ * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
+ * for the descriptor list (BUFFERLISTSIZE).
+ */
+ BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
+
+ /* limit number of buffers to maximum amount of descriptors */
+ if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
+ BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
+
+ /* use enough buffers to transmit one max size frame */
+ info->tx_buf_count = BuffersPerFrame + 1;
+
+ /* never use more than half the available buffers for transmit */
+ if (info->tx_buf_count > (BufferCount/2))
+ info->tx_buf_count = BufferCount/2;
+
+ if (info->tx_buf_count > SCAMAXDESC)
+ info->tx_buf_count = SCAMAXDESC;
+
+ /* use remaining buffers for receive */
+ info->rx_buf_count = BufferCount - info->tx_buf_count;
+
+ if (info->rx_buf_count > SCAMAXDESC)
+ info->rx_buf_count = SCAMAXDESC;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
+ __FILE__,__LINE__, info->device_name,
+ info->tx_buf_count,info->rx_buf_count);
+
+ if ( alloc_buf_list( info ) < 0 ||
+ alloc_frame_bufs(info,
+ info->rx_buf_list,
+ info->rx_buf_list_ex,
+ info->rx_buf_count) < 0 ||
+ alloc_frame_bufs(info,
+ info->tx_buf_list,
+ info->tx_buf_list_ex,
+ info->tx_buf_count) < 0 ||
+ alloc_tmp_rx_buf(info) < 0 ) {
+ printk("%s(%d):%s Can't allocate DMA buffer memory\n",
+ __FILE__,__LINE__, info->device_name);
+ return -ENOMEM;
+ }
+
+ rx_reset_buffers( info );
+
+ return 0;
+}
+
+/* Allocate DMA buffers for the transmit and receive descriptor lists.
+ */
+int alloc_buf_list(SLMP_INFO *info)
+{
+ unsigned int i;
+
+ /* build list in adapter shared memory */
+ info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
+ info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
+ info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
+
+ memset(info->buffer_list, 0, BUFFERLISTSIZE);
+
+ /* Save virtual address pointers to the receive and */
+ /* transmit buffer lists. (Receive 1st). These pointers will */
+ /* be used by the processor to access the lists. */
+ info->rx_buf_list = (SCADESC *)info->buffer_list;
+
+ info->tx_buf_list = (SCADESC *)info->buffer_list;
+ info->tx_buf_list += info->rx_buf_count;
+
+ /* Build links for circular buffer entry lists (tx and rx)
+ *
+ * Note: links are physical addresses read by the SCA device
+ * to determine the next buffer entry to use.
+ */
+
+ for ( i = 0; i < info->rx_buf_count; i++ ) {
+ /* calculate and store physical address of this buffer entry */
+ info->rx_buf_list_ex[i].phys_entry =
+ info->buffer_list_phys + (i * sizeof(SCABUFSIZE));
+
+ /* calculate and store physical address of */
+ /* next entry in cirular list of entries */
+ info->rx_buf_list[i].next = info->buffer_list_phys;
+ if ( i < info->rx_buf_count - 1 )
+ info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
+
+ info->rx_buf_list[i].length = SCABUFSIZE;
+ }
+
+ for ( i = 0; i < info->tx_buf_count; i++ ) {
+ /* calculate and store physical address of this buffer entry */
+ info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
+ ((info->rx_buf_count + i) * sizeof(SCADESC));
+
+ /* calculate and store physical address of */
+ /* next entry in cirular list of entries */
+
+ info->tx_buf_list[i].next = info->buffer_list_phys +
+ info->rx_buf_count * sizeof(SCADESC);
+
+ if ( i < info->tx_buf_count - 1 )
+ info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
+ }
+
+ return 0;
+}
+
+/* Allocate the frame DMA buffers used by the specified buffer list.
+ */
+int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
+{
+ int i;
+ unsigned long phys_addr;
+
+ for ( i = 0; i < count; i++ ) {
+ buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
+ phys_addr = info->port_array[0]->last_mem_alloc;
+ info->port_array[0]->last_mem_alloc += SCABUFSIZE;
+
+ buf_list[i].buf_ptr = (unsigned short)phys_addr;
+ buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
+ }
+
+ return 0;
+}
+
+void free_dma_bufs(SLMP_INFO *info)
+{
+ info->buffer_list = NULL;
+ info->rx_buf_list = NULL;
+ info->tx_buf_list = NULL;
+}
+
+/* allocate buffer large enough to hold max_frame_size.
+ * This buffer is used to pass an assembled frame to the line discipline.
+ */
+int alloc_tmp_rx_buf(SLMP_INFO *info)
+{
+ info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
+ if (info->tmp_rx_buf == NULL)
+ return -ENOMEM;
+ return 0;
+}
+
+void free_tmp_rx_buf(SLMP_INFO *info)
+{
+ if (info->tmp_rx_buf)
+ kfree(info->tmp_rx_buf);
+ info->tmp_rx_buf = NULL;
+}
+
+int claim_resources(SLMP_INFO *info)
+{
+ if (request_mem_region(info->phys_memory_base,0x40000,"synclinkmp") == NULL) {
+ printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->phys_memory_base);
+ goto errout;
+ }
+ else
+ info->shared_mem_requested = 1;
+
+ if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
+ printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->phys_lcr_base);
+ goto errout;
+ }
+ else
+ info->lcr_mem_requested = 1;
+
+ if (request_mem_region(info->phys_sca_base + info->sca_offset,512,"synclinkmp") == NULL) {
+ printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->phys_sca_base);
+ goto errout;
+ }
+ else
+ info->sca_base_requested = 1;
+
+ if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,16,"synclinkmp") == NULL) {
+ printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
+ goto errout;
+ }
+ else
+ info->sca_statctrl_requested = 1;
+
+ info->memory_base = ioremap(info->phys_memory_base,SCA_MEM_SIZE);
+ if (!info->memory_base) {
+ printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->phys_memory_base );
+ goto errout;
+ }
+
+ if ( !memory_test(info) ) {
+ printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->phys_memory_base );
+ goto errout;
+ }
+
+ info->lcr_base = ioremap(info->phys_lcr_base,PAGE_SIZE) + info->lcr_offset;
+ if (!info->lcr_base) {
+ printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
+ goto errout;
+ }
+
+ info->sca_base = ioremap(info->phys_sca_base,PAGE_SIZE) + info->sca_offset;
+ if (!info->sca_base) {
+ printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->phys_sca_base );
+ goto errout;
+ }
+
+ info->statctrl_base = ioremap(info->phys_statctrl_base,PAGE_SIZE) + info->statctrl_offset;
+ if (!info->statctrl_base) {
+ printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
+ goto errout;
+ }
+
+ return 0;
+
+errout:
+ release_resources( info );
+ return -ENODEV;
+}
+
+void release_resources(SLMP_INFO *info)
+{
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):%s release_resources() entry\n",
+ __FILE__,__LINE__,info->device_name );
+
+ if ( info->irq_requested ) {
+ free_irq(info->irq_level, info);
+ info->irq_requested = 0;
+ }
+
+ if ( info->shared_mem_requested ) {
+ release_mem_region(info->phys_memory_base,0x40000);
+ info->shared_mem_requested = 0;
+ }
+ if ( info->lcr_mem_requested ) {
+ release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
+ info->lcr_mem_requested = 0;
+ }
+ if ( info->sca_base_requested ) {
+ release_mem_region(info->phys_sca_base + info->sca_offset,512);
+ info->sca_base_requested = 0;
+ }
+ if ( info->sca_statctrl_requested ) {
+ release_mem_region(info->phys_statctrl_base + info->statctrl_offset,16);
+ info->sca_statctrl_requested = 0;
+ }
+
+ if (info->memory_base){
+ iounmap(info->memory_base);
+ info->memory_base = 0;
+ }
+
+ if (info->sca_base) {
+ iounmap(info->sca_base - info->sca_offset);
+ info->sca_base=0;
+ }
+
+ if (info->statctrl_base) {
+ iounmap(info->statctrl_base - info->statctrl_offset);
+ info->statctrl_base=0;
+ }
+
+ if (info->lcr_base){
+ iounmap(info->lcr_base - info->lcr_offset);
+ info->lcr_base = 0;
+ }
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):%s release_resources() exit\n",
+ __FILE__,__LINE__,info->device_name );
+}
+
+/* Add the specified device instance data structure to the
+ * global linked list of devices and increment the device count.
+ */
+void add_device(SLMP_INFO *info)
+{
+ info->next_device = NULL;
+ info->line = synclinkmp_device_count;
+ sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
+
+ if (info->line < MAX_DEVICES) {
+ if (maxframe[info->line])
+ info->max_frame_size = maxframe[info->line];
+ info->dosyncppp = dosyncppp[info->line];
+ }
+
+ synclinkmp_device_count++;
+
+ if ( !synclinkmp_device_list )
+ synclinkmp_device_list = info;
+ else {
+ SLMP_INFO *current_dev = synclinkmp_device_list;
+ while( current_dev->next_device )
+ current_dev = current_dev->next_device;
+ current_dev->next_device = info;
+ }
+
+ if ( info->max_frame_size < 4096 )
+ info->max_frame_size = 4096;
+ else if ( info->max_frame_size > 65535 )
+ info->max_frame_size = 65535;
+
+ printk( "SyncLink MultiPort %s: "
+ "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
+ info->device_name,
+ info->phys_sca_base,
+ info->phys_memory_base,
+ info->phys_statctrl_base,
+ info->phys_lcr_base,
+ info->irq_level,
+ info->max_frame_size );
+
+#ifdef CONFIG_SYNCLINK_SYNCPPP
+ if (info->dosyncppp)
+ sppp_init(info);
+#endif
+}
+
+/* Allocate and initialize a device instance structure
+ *
+ * Return Value: pointer to SLMP_INFO if success, otherwise NULL
+ */
+SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
+{
+ SLMP_INFO *info;
+
+ info = (SLMP_INFO *)kmalloc(sizeof(SLMP_INFO),
+ GFP_KERNEL);
+
+ if (!info) {
+ printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
+ __FILE__,__LINE__, adapter_num, port_num);
+ } else {
+ memset(info, 0, sizeof(SLMP_INFO));
+ info->magic = MGSL_MAGIC;
+ info->task.sync = 0;
+ info->task.routine = bh_handler;
+ info->task.data = info;
+ info->max_frame_size = 4096;
+ info->close_delay = 5*HZ/10;
+ info->closing_wait = 30*HZ;
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+ init_waitqueue_head(&info->status_event_wait_q);
+ init_waitqueue_head(&info->event_wait_q);
+ spin_lock_init(&info->netlock);
+ memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
+ info->idle_mode = HDLC_TXIDLE_FLAGS;
+ info->adapter_num = adapter_num;
+ info->port_num = port_num;
+
+ /* Copy configuration info to device instance data */
+ info->irq_level = pdev->irq;
+ info->phys_lcr_base = pci_resource_start(pdev,0);
+ info->phys_sca_base = pci_resource_start(pdev,2);
+ info->phys_memory_base = pci_resource_start(pdev,3);
+ info->phys_statctrl_base = pci_resource_start(pdev,4);
+
+ /* Because veremap only works on page boundaries we must map
+ * a larger area than is actually implemented for the LCR
+ * memory range. We map a full page starting at the page boundary.
+ */
+ info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
+ info->phys_lcr_base &= ~(PAGE_SIZE-1);
+
+ info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1);
+ info->phys_sca_base &= ~(PAGE_SIZE-1);
+
+ info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1);
+ info->phys_statctrl_base &= ~(PAGE_SIZE-1);
+
+ info->bus_type = MGSL_BUS_TYPE_PCI;
+ info->irq_flags = SA_SHIRQ;
+
+ /* Store the PCI9050 misc control register value because a flaw
+ * in the PCI9050 prevents LCR registers from being read if
+ * BIOS assigns an LCR base address with bit 7 set.
+ *
+ * Only the misc control register is accessed for which only
+ * write access is needed, so set an initial value and change
+ * bits to the device instance data as we write the value
+ * to the actual misc control register.
+ */
+ info->misc_ctrl_value = 0x087e4546;
+
+ /* initial port state is unknown - if startup errors
+ * occur, init_error will be set to indicate the
+ * problem. Once the port is fully initialized,
+ * this value will be set to 0 to indicate the
+ * port is available.
+ */
+ info->init_error = -1;
+ }
+
+ return info;
+}
+
+void device_init(int adapter_num, struct pci_dev *pdev)
+{
+ SLMP_INFO *port_array[SCA_MAX_PORTS];
+ int port;
+
+ /* allocate device instances for up to SCA_MAX_PORTS devices */
+ for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
+ port_array[port] = alloc_dev(adapter_num,port,pdev);
+ if( port_array[port] == NULL ) {
+ for ( --port; port >= 0; --port )
+ kfree(port_array[port]);
+ return;
+ }
+ }
+
+ /* give copy of port_array to all ports and add to device list */
+ for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
+ memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
+ add_device( port_array[port] );
+ spin_lock_init(&port_array[port]->lock);
+ }
+
+ /* Allocate and claim adapter resources */
+ if ( !claim_resources(port_array[0]) ) {
+
+ alloc_dma_bufs(port_array[0]);
+
+ /* copy resource information from first port to others */
+ for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
+ port_array[port]->lock = port_array[0]->lock;
+ port_array[port]->irq_level = port_array[0]->irq_level;
+ port_array[port]->memory_base = port_array[0]->memory_base;
+ port_array[port]->sca_base = port_array[0]->sca_base;
+ port_array[port]->statctrl_base = port_array[0]->statctrl_base;
+ port_array[port]->lcr_base = port_array[0]->lcr_base;
+ alloc_dma_bufs(port_array[port]);
+ }
+
+ if ( request_irq(port_array[0]->irq_level,
+ synclinkmp_interrupt,
+ port_array[0]->irq_flags,
+ port_array[0]->device_name,
+ port_array[0]) < 0 ) {
+ printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n",
+ __FILE__,__LINE__,
+ port_array[0]->device_name,
+ port_array[0]->irq_level );
+ }
+ else {
+ port_array[0]->irq_requested = 1;
+ adapter_test(port_array[0]);
+ }
+ }
+}
+
+/* Driver initialization entry point.
+ */
+
+static int __init synclinkmp_init(void)
+{
+ SLMP_INFO *info;
+
+ EXPORT_NO_SYMBOLS;
+
+ if (break_on_load) {
+ synclinkmp_get_text_ptr();
+ BREAKPOINT();
+ }
+
+ printk("%s %s\n", driver_name, driver_version);
+
+ synclinkmp_adapter_count = -1;
+ pci_register_driver(&synclinkmp_pci_driver);
+
+ if ( !synclinkmp_device_list ) {
+ printk("%s(%d):No SyncLink devices found.\n",__FILE__,__LINE__);
+ return -ENODEV;
+ }
+
+ memset(serial_table,0,sizeof(struct tty_struct*)*MAX_DEVICES);
+ memset(serial_termios,0,sizeof(struct termios*)*MAX_DEVICES);
+ memset(serial_termios_locked,0,sizeof(struct termios*)*MAX_DEVICES);
+
+ /* Initialize the tty_driver structure */
+
+ memset(&serial_driver, 0, sizeof(struct tty_driver));
+ serial_driver.magic = TTY_DRIVER_MAGIC;
+ serial_driver.driver_name = "synclinkmp";
+ serial_driver.name = "ttySLM";
+ serial_driver.major = ttymajor;
+ serial_driver.minor_start = 64;
+ serial_driver.num = synclinkmp_device_count;
+ serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
+ serial_driver.subtype = SERIAL_TYPE_NORMAL;
+ serial_driver.init_termios = tty_std_termios;
+ serial_driver.init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver.flags = TTY_DRIVER_REAL_RAW;
+ serial_driver.refcount = &serial_refcount;
+ serial_driver.table = serial_table;
+ serial_driver.termios = serial_termios;
+ serial_driver.termios_locked = serial_termios_locked;
+
+ serial_driver.open = open;
+ serial_driver.close = close;
+ serial_driver.write = write;
+ serial_driver.put_char = put_char;
+ serial_driver.flush_chars = flush_chars;
+ serial_driver.write_room = write_room;
+ serial_driver.chars_in_buffer = chars_in_buffer;
+ serial_driver.flush_buffer = flush_buffer;
+ serial_driver.ioctl = ioctl;
+ serial_driver.throttle = throttle;
+ serial_driver.unthrottle = unthrottle;
+ serial_driver.send_xchar = send_xchar;
+ serial_driver.break_ctl = set_break;
+ serial_driver.wait_until_sent = wait_until_sent;
+ serial_driver.read_proc = read_proc;
+ serial_driver.set_termios = set_termios;
+ serial_driver.stop = tx_hold;
+ serial_driver.start = tx_release;
+ serial_driver.hangup = hangup;
+
+ /*
+ * The callout device is just like normal device except for
+ * major number and the subtype code.
+ */
+ callout_driver = serial_driver;
+ callout_driver.name = "cuaSLM";
+ callout_driver.major = cuamajor;
+ callout_driver.subtype = SERIAL_TYPE_CALLOUT;
+ callout_driver.read_proc = 0;
+ callout_driver.proc_entry = 0;
+
+ if (tty_register_driver(&serial_driver) < 0)
+ printk("%s(%d):Couldn't register serial driver\n",
+ __FILE__,__LINE__);
+
+ if (tty_register_driver(&callout_driver) < 0)
+ printk("%s(%d):Couldn't register callout driver\n",
+ __FILE__,__LINE__);
+
+ printk("%s %s, tty major#%d callout major#%d\n",
+ driver_name, driver_version,
+ serial_driver.major, callout_driver.major);
+
+ /* Propagate these values to all device instances */
+
+ info = synclinkmp_device_list;
+ while(info){
+ info->callout_termios = callout_driver.init_termios;
+ info->normal_termios = serial_driver.init_termios;
+ info = info->next_device;
+ }
+
+ return 0;
+}
+
+static void __exit synclinkmp_exit(void)
+{
+ unsigned long flags;
+ int rc;
+ SLMP_INFO *info;
+ SLMP_INFO *tmp;
+
+ printk("Unloading %s %s\n", driver_name, driver_version);
+ save_flags(flags);
+ cli();
+ if ((rc = tty_unregister_driver(&serial_driver)))
+ printk("%s(%d) failed to unregister tty driver err=%d\n",
+ __FILE__,__LINE__,rc);
+ if ((rc = tty_unregister_driver(&callout_driver)))
+ printk("%s(%d) failed to unregister callout driver err=%d\n",
+ __FILE__,__LINE__,rc);
+ restore_flags(flags);
+
+ info = synclinkmp_device_list;
+ while(info) {
+#ifdef CONFIG_SYNCLINK_SYNCPPP
+ if (info->dosyncppp)
+ sppp_delete(info);
+#endif
+ reset_port(info);
+ if ( info->port_num == 0 ) {
+ if ( info->irq_requested ) {
+ free_irq(info->irq_level, info);
+ info->irq_requested = 0;
+ }
+ }
+ info = info->next_device;
+ }
+
+ /* port 0 of each adapter originally claimed
+ * all resources, release those now
+ */
+ info = synclinkmp_device_list;
+ while(info) {
+ free_dma_bufs(info);
+ free_tmp_rx_buf(info);
+ if ( info->port_num == 0 ) {
+ spin_lock_irqsave(&info->lock,flags);
+ reset_adapter(info);
+ write_reg(info, LPR, 1); /* set low power mode */
+ spin_unlock_irqrestore(&info->lock,flags);
+ release_resources(info);
+ }
+ tmp = info;
+ info = info->next_device;
+ kfree(tmp);
+ }
+
+ pci_unregister_driver(&synclinkmp_pci_driver);
+}
+
+module_init(synclinkmp_init);
+module_exit(synclinkmp_exit);
+
+/* Set the port for internal loopback mode.
+ * The TxCLK and RxCLK signals are generated from the BRG and
+ * the TxD is looped back to the RxD internally.
+ */
+void enable_loopback(SLMP_INFO *info, int enable)
+{
+ if (enable) {
+ /* MD2 (Mode Register 2)
+ * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback
+ */
+ write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
+
+ /* degate external TxC clock source */
+ info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
+ write_control_reg(info);
+
+ /* RXS/TXS (Rx/Tx clock source)
+ * 07 Reserved, must be 0
+ * 06..04 Clock Source, 100=BRG
+ * 03..00 Clock Divisor, 0000=1
+ */
+ write_reg(info, RXS, 0x40);
+ write_reg(info, TXS, 0x40);
+
+ } else {
+ /* MD2 (Mode Register 2)
+ * 01..00 CNCT<1..0> Channel connection, 0=normal
+ */
+ write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
+
+ /* RXS/TXS (Rx/Tx clock source)
+ * 07 Reserved, must be 0
+ * 06..04 Clock Source, 000=RxC/TxC Pin
+ * 03..00 Clock Divisor, 0000=1
+ */
+ write_reg(info, RXS, 0x00);
+ write_reg(info, TXS, 0x00);
+ }
+
+ /* set LinkSpeed if available, otherwise default to 2Mbps */
+ if (info->params.clock_speed)
+ set_rate(info, info->params.clock_speed);
+ else
+ set_rate(info, 3686400);
+}
+
+/* Set the baud rate register to the desired speed
+ *
+ * data_rate data rate of clock in bits per second
+ * A data rate of 0 disables the AUX clock.
+ */
+void set_rate( SLMP_INFO *info, u32 data_rate )
+{
+ u32 TMCValue;
+ unsigned char BRValue;
+ u32 Divisor=0;
+
+ /* fBRG = fCLK/(TMC * 2^BR)
+ */
+ if (data_rate != 0) {
+ Divisor = 14745600/data_rate;
+ if (!Divisor)
+ Divisor = 1;
+
+ TMCValue = Divisor;
+
+ BRValue = 0;
+ if (TMCValue != 1 && TMCValue != 2) {
+ /* BRValue of 0 provides 50/50 duty cycle *only* when
+ * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
+ * 50/50 duty cycle.
+ */
+ BRValue = 1;
+ TMCValue >>= 1;
+ }
+
+ /* while TMCValue is too big for TMC register, divide
+ * by 2 and increment BR exponent.
+ */
+ for(; TMCValue > 256 && BRValue < 10; BRValue++)
+ TMCValue >>= 1;
+
+ write_reg(info, TXS,
+ (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
+ write_reg(info, RXS,
+ (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
+ write_reg(info, TMC, (unsigned char)TMCValue);
+ }
+ else {
+ write_reg(info, TXS,0);
+ write_reg(info, RXS,0);
+ write_reg(info, TMC, 0);
+ }
+}
+
+/* Disable receiver
+ */
+void rx_stop(SLMP_INFO *info)
+{
+ if (debug_level >= DEBUG_LEVEL_ISR)
+ printk("%s(%d):%s rx_stop()\n",
+ __FILE__,__LINE__, info->device_name );
+
+ write_reg(info, CMD, RXRESET);
+
+ info->ie0_value &= ~RXRDYE;
+ write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */
+
+ write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
+ write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
+ write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */
+
+ info->rx_enabled = 0;
+ info->rx_overflow = 0;
+}
+
+/* enable the receiver
+ */
+void rx_start(SLMP_INFO *info)
+{
+ int i;
+
+ if (debug_level >= DEBUG_LEVEL_ISR)
+ printk("%s(%d):%s rx_start()\n",
+ __FILE__,__LINE__, info->device_name );
+
+ write_reg(info, CMD, RXRESET);
+
+ if ( info->params.mode == MGSL_MODE_HDLC ) {
+ /* HDLC, disabe IRQ on rxdata */
+ info->ie0_value &= ~RXRDYE;
+ write_reg(info, IE0, info->ie0_value);
+
+ /* Reset all Rx DMA buffers and program rx dma */
+ write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
+ write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
+
+ for (i = 0; i < info->rx_buf_count; i++) {
+ info->rx_buf_list[i].status = 0xff;
+
+ // throttle to 4 shared memory writes at a time to prevent
+ // hogging local bus (keep latency time for DMA requests low).
+ if (!(i % 4))
+ read_status_reg(info);
+ }
+ info->current_rx_buf = 0;
+
+ /* set current/1st descriptor address */
+ write_reg16(info, RXDMA + CDA,
+ info->rx_buf_list_ex[0].phys_entry);
+
+ /* set new last rx descriptor address */
+ write_reg16(info, RXDMA + EDA,
+ info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
+
+ /* set buffer length (shared by all rx dma data buffers) */
+ write_reg16(info, RXDMA + BFL, SCABUFSIZE);
+
+ write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */
+ write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */
+ } else {
+ /* async, enable IRQ on rxdata */
+ info->ie0_value |= RXRDYE;
+ write_reg(info, IE0, info->ie0_value);
+ }
+
+ write_reg(info, CMD, RXENABLE);
+
+ info->rx_overflow = FALSE;
+ info->rx_enabled = 1;
+}
+
+/* Enable the transmitter and send a transmit frame if
+ * one is loaded in the DMA buffers.
+ */
+void tx_start(SLMP_INFO *info)
+{
+ if (debug_level >= DEBUG_LEVEL_ISR)
+ printk("%s(%d):%s tx_start() tx_count=%d\n",
+ __FILE__,__LINE__, info->device_name,info->tx_count );
+
+ if (!info->tx_enabled ) {
+ write_reg(info, CMD, TXRESET);
+ write_reg(info, CMD, TXENABLE);
+ info->tx_enabled = TRUE;
+ }
+
+ if ( info->tx_count ) {
+
+ /* If auto RTS enabled and RTS is inactive, then assert */
+ /* RTS and set a flag indicating that the driver should */
+ /* negate RTS when the transmission completes. */
+
+ info->drop_rts_on_tx_done = 0;
+
+ if (info->params.mode != MGSL_MODE_ASYNC) {
+
+ if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
+ get_signals( info );
+ if ( !(info->serial_signals & SerialSignal_RTS) ) {
+ info->serial_signals |= SerialSignal_RTS;
+ set_signals( info );
+ info->drop_rts_on_tx_done = 1;
+ }
+ }
+
+ write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
+ write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
+
+ /* set TX CDA (current descriptor address) */
+ write_reg16(info, TXDMA + CDA,
+ info->tx_buf_list_ex[0].phys_entry);
+
+ /* set TX EDA (last descriptor address) */
+ write_reg16(info, TXDMA + EDA,
+ info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
+
+ /* clear IDLE and UDRN status bit */
+ info->ie1_value &= ~(IDLE + UDRN);
+ if (info->params.mode != MGSL_MODE_ASYNC)
+ info->ie1_value |= UDRN; /* HDLC, IRQ on underrun */
+ write_reg(info, IE1, info->ie1_value); /* enable MSCI interrupts */
+ write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
+
+ write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */
+ write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */
+
+ info->tx_timer.expires = jiffies + jiffies_from_ms(5000);
+ add_timer(&info->tx_timer);
+ }
+ else {
+ tx_load_fifo(info);
+ /* async, enable IRQ on txdata */
+ info->ie0_value |= TXRDYE;
+ write_reg(info, IE0, info->ie0_value);
+ }
+
+ info->tx_active = 1;
+ }
+}
+
+/* stop the transmitter and DMA
+ */
+void tx_stop( SLMP_INFO *info )
+{
+ if (debug_level >= DEBUG_LEVEL_ISR)
+ printk("%s(%d):%s tx_stop()\n",
+ __FILE__,__LINE__, info->device_name );
+
+ del_timer(&info->tx_timer);
+
+ write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
+ write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
+
+ write_reg(info, CMD, TXRESET);
+
+ info->ie1_value &= ~(UDRN + IDLE);
+ write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
+ write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
+
+ info->ie0_value &= ~TXRDYE;
+ write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */
+
+ info->tx_enabled = 0;
+ info->tx_active = 0;
+}
+
+/* Fill the transmit FIFO until the FIFO is full or
+ * there is no more data to load.
+ */
+void tx_load_fifo(SLMP_INFO *info)
+{
+ u8 TwoBytes[2];
+
+ /* do nothing is now tx data available and no XON/XOFF pending */
+
+ if ( !info->tx_count && !info->x_char )
+ return;
+
+ /* load the Transmit FIFO until FIFOs full or all data sent */
+
+ while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
+
+ /* there is more space in the transmit FIFO and */
+ /* there is more data in transmit buffer */
+
+ if ( (info->tx_count > 1) && !info->x_char ) {
+ /* write 16-bits */
+ TwoBytes[0] = info->tx_buf[info->tx_get++];
+ if (info->tx_get >= info->max_frame_size)
+ info->tx_get -= info->max_frame_size;
+ TwoBytes[1] = info->tx_buf[info->tx_get++];
+ if (info->tx_get >= info->max_frame_size)
+ info->tx_get -= info->max_frame_size;
+
+ write_reg16(info, TRB, *((u16 *)TwoBytes));
+
+ info->tx_count -= 2;
+ info->icount.tx += 2;
+ } else {
+ /* only 1 byte left to transmit or 1 FIFO slot left */
+
+ if (info->x_char) {
+ /* transmit pending high priority char */
+ write_reg(info, TRB, info->x_char);
+ info->x_char = 0;
+ } else {
+ write_reg(info, TRB, info->tx_buf[info->tx_get++]);
+ if (info->tx_get >= info->max_frame_size)
+ info->tx_get -= info->max_frame_size;
+ info->tx_count--;
+ }
+ info->icount.tx++;
+ }
+ }
+}
+
+/* Reset a port to a known state
+ */
+void reset_port(SLMP_INFO *info)
+{
+ if (info->sca_base) {
+
+ tx_stop(info);
+ rx_stop(info);
+
+ info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+ set_signals(info);
+
+ /* disable all port interrupts */
+ info->ie0_value = 0;
+ info->ie1_value = 0;
+ info->ie2_value = 0;
+ write_reg(info, IE0, info->ie0_value);
+ write_reg(info, IE1, info->ie1_value);
+ write_reg(info, IE2, info->ie2_value);
+
+ write_reg(info, CMD, CHRESET);
+ }
+}
+
+/* Reset all the ports to a known state.
+ */
+void reset_adapter(SLMP_INFO *info)
+{
+ int i;
+
+ for ( i=0; i < SCA_MAX_PORTS; ++i) {
+ if (info->port_array[i])
+ reset_port(info->port_array[i]);
+ }
+}
+
+/* Program port for asynchronous communications.
+ */
+void async_mode(SLMP_INFO *info)
+{
+
+ unsigned char RegValue;
+
+ tx_stop(info);
+ rx_stop(info);
+
+ /* MD0, Mode Register 0
+ *
+ * 07..05 PRCTL<2..0>, Protocol Mode, 000=async
+ * 04 AUTO, Auto-enable (RTS/CTS/DCD)
+ * 03 Reserved, must be 0
+ * 02 CRCCC, CRC Calculation, 0=disabled
+ * 01..00 STOP<1..0> Stop bits (00=1,10=2)
+ *
+ * 0000 0000
+ */
+ RegValue = 0x00;
+ if (info->params.stop_bits != 1)
+ RegValue |= BIT1;
+ write_reg(info, MD0, RegValue);
+
+ /* MD1, Mode Register 1
+ *
+ * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
+ * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
+ * 03..02 RXCHR<1..0>, rx char size
+ * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
+ *
+ * 0100 0000
+ */
+ RegValue = 0x40;
+ switch (info->params.data_bits) {
+ case 7: RegValue |= BIT4 + BIT2; break;
+ case 6: RegValue |= BIT5 + BIT3; break;
+ case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
+ }
+ if (info->params.parity != ASYNC_PARITY_NONE) {
+ RegValue |= BIT1;
+ if (info->params.parity == ASYNC_PARITY_ODD)
+ RegValue |= BIT0;
+ }
+ write_reg(info, MD1, RegValue);
+
+ /* MD2, Mode Register 2
+ *
+ * 07..02 Reserved, must be 0
+ * 01..00 CNCT<1..0> Channel connection, 0=normal
+ *
+ * 0000 0000
+ */
+ RegValue = 0x00;
+ write_reg(info, MD2, RegValue);
+
+ /* RXS, Receive clock source
+ *
+ * 07 Reserved, must be 0
+ * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
+ * 03..00 RXBR<3..0>, rate divisor, 0000=1
+ */
+ RegValue=BIT6;
+ write_reg(info, RXS, RegValue);
+
+ /* TXS, Transmit clock source
+ *
+ * 07 Reserved, must be 0
+ * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
+ * 03..00 RXBR<3..0>, rate divisor, 0000=1
+ */
+ RegValue=BIT6;
+ write_reg(info, TXS, RegValue);
+
+ /* Control Register
+ *
+ * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
+ */
+ info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
+ write_control_reg(info);
+
+ tx_set_idle(info);
+
+ /* RRC Receive Ready Control 0
+ *
+ * 07..05 Reserved, must be 0
+ * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
+ */
+ write_reg(info, TRC0, 0x00);
+
+ /* TRC0 Transmit Ready Control 0
+ *
+ * 07..05 Reserved, must be 0
+ * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
+ */
+ write_reg(info, TRC0, 0x10);
+
+ /* TRC1 Transmit Ready Control 1
+ *
+ * 07..05 Reserved, must be 0
+ * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
+ */
+ write_reg(info, TRC1, 0x1e);
+
+ /* CTL, MSCI control register
+ *
+ * 07..06 Reserved, set to 0
+ * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
+ * 04 IDLC, idle control, 0=mark 1=idle register
+ * 03 BRK, break, 0=off 1 =on (async)
+ * 02 SYNCLD, sync char load enable (BSC) 1=enabled
+ * 01 GOP, go active on poll (LOOP mode) 1=enabled
+ * 00 RTS, RTS output control, 0=active 1=inactive
+ *
+ * 0001 0001
+ */
+ RegValue = 0x10;
+ if (!(info->serial_signals & SerialSignal_RTS))
+ RegValue |= 0x01;
+ write_reg(info, CTL, RegValue);
+
+ /* enable status interrupts */
+ info->ie0_value |= TXINTE + RXINTE;
+ write_reg(info, IE0, info->ie0_value);
+
+ /* enable break detect interrupt */
+ info->ie1_value = BRKD;
+ write_reg(info, IE1, info->ie1_value);
+
+ /* enable rx overrun interrupt */
+ info->ie2_value = OVRN;
+ write_reg(info, IE2, info->ie2_value);
+
+ set_rate( info, info->params.data_rate * 16 );
+
+ if (info->params.loopback)
+ enable_loopback(info,1);
+}
+
+/* Program the SCA for HDLC communications.
+ */
+void hdlc_mode(SLMP_INFO *info)
+{
+ unsigned char RegValue;
+ u32 DpllDivisor;
+
+ // Can't use DPLL because SCA outputs recovered clock on RxC when
+ // DPLL mode selected. This causes output contention with RxC receiver.
+ // Use of DPLL would require external hardware to disable RxC receiver
+ // when DPLL mode selected.
+ info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
+
+ /* disable DMA interrupts */
+ write_reg(info, TXDMA + DIR, 0);
+ write_reg(info, RXDMA + DIR, 0);
+
+ /* MD0, Mode Register 0
+ *
+ * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC
+ * 04 AUTO, Auto-enable (RTS/CTS/DCD)
+ * 03 Reserved, must be 0
+ * 02 CRCCC, CRC Calculation, 1=enabled
+ * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
+ * 00 CRC0, CRC initial value, 1 = all 1s
+ *
+ * 1000 0001
+ */
+ RegValue = 0x81;
+ if (info->params.flags & HDLC_FLAG_AUTO_CTS)
+ RegValue |= BIT4;
+ if (info->params.flags & HDLC_FLAG_AUTO_DCD)
+ RegValue |= BIT4;
+ if (info->params.crc_type == HDLC_CRC_16_CCITT)
+ RegValue |= BIT2 + BIT1;
+ write_reg(info, MD0, RegValue);
+
+ /* MD1, Mode Register 1
+ *
+ * 07..06 ADDRS<1..0>, Address detect, 00=no addr check
+ * 05..04 TXCHR<1..0>, tx char size, 00=8 bits
+ * 03..02 RXCHR<1..0>, rx char size, 00=8 bits
+ * 01..00 PMPM<1..0>, Parity mode, 00=no parity
+ *
+ * 0000 0000
+ */
+ RegValue = 0x00;
+ write_reg(info, MD1, RegValue);
+
+ /* MD2, Mode Register 2
+ *
+ * 07 NRZFM, 0=NRZ, 1=FM
+ * 06..05 CODE<1..0> Encoding, 00=NRZ
+ * 04..03 DRATE<1..0> DPLL Divisor, 00=8
+ * 02 Reserved, must be 0
+ * 01..00 CNCT<1..0> Channel connection, 0=normal
+ *
+ * 0000 0000
+ */
+ RegValue = 0x00;
+ switch(info->params.encoding) {
+ case HDLC_ENCODING_NRZI: RegValue |= BIT5; break;
+ case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */
+ case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
+ case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */
+#if 0
+ case HDLC_ENCODING_NRZB: /* not supported */
+ case HDLC_ENCODING_NRZI_MARK: /* not supported */
+ case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */
+#endif
+ }
+ if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
+ DpllDivisor = 16;
+ RegValue |= BIT3;
+ } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
+ DpllDivisor = 8;
+ } else {
+ DpllDivisor = 32;
+ RegValue |= BIT4;
+ }
+ write_reg(info, MD2, RegValue);
+
+
+ /* RXS, Receive clock source
+ *
+ * 07 Reserved, must be 0
+ * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
+ * 03..00 RXBR<3..0>, rate divisor, 0000=1
+ */
+ RegValue=0;
+ if (info->params.flags & HDLC_FLAG_RXC_BRG)
+ RegValue |= BIT6;
+ if (info->params.flags & HDLC_FLAG_RXC_DPLL)
+ RegValue |= BIT6 + BIT5;
+ write_reg(info, RXS, RegValue);
+
+ /* TXS, Transmit clock source
+ *
+ * 07 Reserved, must be 0
+ * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
+ * 03..00 RXBR<3..0>, rate divisor, 0000=1
+ */
+ RegValue=0;
+ if (info->params.flags & HDLC_FLAG_TXC_BRG)
+ RegValue |= BIT6;
+ if (info->params.flags & HDLC_FLAG_TXC_DPLL)
+ RegValue |= BIT6 + BIT5;
+ write_reg(info, TXS, RegValue);
+
+ if (info->params.flags & HDLC_FLAG_RXC_DPLL)
+ set_rate(info, info->params.clock_speed * DpllDivisor);
+ else
+ set_rate(info, info->params.clock_speed);
+
+ /* GPDATA (General Purpose I/O Data Register)
+ *
+ * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
+ */
+ if (info->params.flags & HDLC_FLAG_TXC_BRG)
+ info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
+ else
+ info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
+ write_control_reg(info);
+
+ /* RRC Receive Ready Control 0
+ *
+ * 07..05 Reserved, must be 0
+ * 04..00 RRC<4..0> Rx FIFO trigger active
+ */
+ write_reg(info, RRC, rx_active_fifo_level);
+
+ /* TRC0 Transmit Ready Control 0
+ *
+ * 07..05 Reserved, must be 0
+ * 04..00 TRC<4..0> Tx FIFO trigger active
+ */
+ write_reg(info, TRC0, tx_active_fifo_level);
+
+ /* TRC1 Transmit Ready Control 1
+ *
+ * 07..05 Reserved, must be 0
+ * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
+ */
+ write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
+
+ /* DMR, DMA Mode Register
+ *
+ * 07..05 Reserved, must be 0
+ * 04 TMOD, Transfer Mode: 1=chained-block
+ * 03 Reserved, must be 0
+ * 02 NF, Number of Frames: 1=multi-frame
+ * 01 CNTE, Frame End IRQ Counter enable: 0=disabled
+ * 00 Reserved, must be 0
+ *
+ * 0001 0100
+ */
+ write_reg(info, TXDMA + DMR, 0x14);
+ write_reg(info, RXDMA + DMR, 0x14);
+
+ /* Set chain pointer base (upper 8 bits of 24 bit addr) */
+ write_reg(info, RXDMA + CPB,
+ (unsigned char)(info->buffer_list_phys >> 16));
+
+ /* Set chain pointer base (upper 8 bits of 24 bit addr) */
+ write_reg(info, TXDMA + CPB,
+ (unsigned char)(info->buffer_list_phys >> 16));
+
+ /* enable status interrupts. other code enables/disables
+ * the individual sources for these two interrupt classes.
+ */
+ info->ie0_value |= TXINTE + RXINTE;
+ write_reg(info, IE0, info->ie0_value);
+
+ /* CTL, MSCI control register
+ *
+ * 07..06 Reserved, set to 0
+ * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
+ * 04 IDLC, idle control, 0=mark 1=idle register
+ * 03 BRK, break, 0=off 1 =on (async)
+ * 02 SYNCLD, sync char load enable (BSC) 1=enabled
+ * 01 GOP, go active on poll (LOOP mode) 1=enabled
+ * 00 RTS, RTS output control, 0=active 1=inactive
+ *
+ * 0001 0001
+ */
+ RegValue = 0x10;
+ if (!(info->serial_signals & SerialSignal_RTS))
+ RegValue |= 0x01;
+ write_reg(info, CTL, RegValue);
+
+ /* preamble not supported ! */
+
+ tx_set_idle(info);
+ tx_stop(info);
+ rx_stop(info);
+
+ set_rate(info, info->params.clock_speed);
+
+ if (info->params.loopback)
+ enable_loopback(info,1);
+}
+
+/* Set the transmit HDLC idle mode
+ */
+void tx_set_idle(SLMP_INFO *info)
+{
+ unsigned char RegValue = 0xff;
+
+ /* Map API idle mode to SCA register bits */
+ switch(info->idle_mode) {
+ case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break;
+ case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break;
+ case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break;
+ case HDLC_TXIDLE_ONES: RegValue = 0xff; break;
+ case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break;
+ case HDLC_TXIDLE_SPACE: RegValue = 0x00; break;
+ case HDLC_TXIDLE_MARK: RegValue = 0xff; break;
+ }
+
+ write_reg(info, IDL, RegValue);
+}
+
+/* Query the adapter for the state of the V24 status (input) signals.
+ */
+void get_signals(SLMP_INFO *info)
+{
+ u16 status = read_reg(info, SR3);
+ u16 gpstatus = read_status_reg(info);
+ u16 testbit;
+
+ /* clear all serial signals except DTR and RTS */
+ info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
+
+ /* set serial signal bits to reflect MISR */
+
+ if (!(status & BIT3))
+ info->serial_signals |= SerialSignal_CTS;
+
+ if ( !(status & BIT2))
+ info->serial_signals |= SerialSignal_DCD;
+
+ testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
+ if (!(gpstatus & testbit))
+ info->serial_signals |= SerialSignal_RI;
+
+ testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
+ if (!(gpstatus & testbit))
+ info->serial_signals |= SerialSignal_DSR;
+}
+
+/* Set the state of DTR and RTS based on contents of
+ * serial_signals member of device context.
+ */
+void set_signals(SLMP_INFO *info)
+{
+ unsigned char RegValue;
+ u16 EnableBit;
+
+ RegValue = read_reg(info, CTL);
+ if (info->serial_signals & SerialSignal_RTS)
+ RegValue &= ~BIT0;
+ else
+ RegValue |= BIT0;
+ write_reg(info, CTL, RegValue);
+
+ // Port 0..3 DTR is ctrl reg <1,3,5,7>
+ EnableBit = BIT1 << (info->port_num*2);
+ if (info->serial_signals & SerialSignal_DTR)
+ info->port_array[0]->ctrlreg_value &= ~EnableBit;
+ else
+ info->port_array[0]->ctrlreg_value |= EnableBit;
+ write_control_reg(info);
+}
+
+/*******************/
+/* DMA Buffer Code */
+/*******************/
+
+/* Set the count for all receive buffers to SCABUFSIZE
+ * and set the current buffer to the first buffer. This effectively
+ * makes all buffers free and discards any data in buffers.
+ */
+void rx_reset_buffers(SLMP_INFO *info)
+{
+ rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
+}
+
+/* Free the buffers used by a received frame
+ *
+ * info pointer to device instance data
+ * first index of 1st receive buffer of frame
+ * last index of last receive buffer of frame
+ */
+void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
+{
+ int done = 0;
+
+ while(!done) {
+ /* reset current buffer for reuse */
+ info->rx_buf_list[first].status = 0xff;
+
+ if (first == last) {
+ done = 1;
+ /* set new last rx descriptor address */
+ write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
+ }
+
+ first++;
+ if (first == info->rx_buf_count)
+ first = 0;
+ }
+
+ /* set current buffer to next buffer after last buffer of frame */
+ info->current_rx_buf = first;
+}
+
+/* Return a received frame from the receive DMA buffers.
+ * Only frames received without errors are returned.
+ *
+ * Return Value: 1 if frame returned, otherwise 0
+ */
+int rx_get_frame(SLMP_INFO *info)
+{
+ unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
+ unsigned short status;
+ unsigned int framesize = 0;
+ int ReturnCode = 0;
+ unsigned long flags;
+ struct tty_struct *tty = info->tty;
+ unsigned char addr_field = 0xff;
+ SCADESC *desc;
+ SCADESC_EX *desc_ex;
+
+CheckAgain:
+ /* assume no frame returned, set zero length */
+ framesize = 0;
+ addr_field = 0xff;
+
+ /*
+ * current_rx_buf points to the 1st buffer of the next available
+ * receive frame. To find the last buffer of the frame look for
+ * a non-zero status field in the buffer entries. (The status
+ * field is set by the 16C32 after completing a receive frame.
+ */
+ StartIndex = EndIndex = info->current_rx_buf;
+
+ for ( ;; ) {
+ desc = &info->rx_buf_list[EndIndex];
+ desc_ex = &info->rx_buf_list_ex[EndIndex];
+
+ if (desc->status == 0xff)
+ goto Cleanup; /* current desc still in use, no frames available */
+
+ if (framesize == 0 && info->params.addr_filter != 0xff)
+ addr_field = desc_ex->virt_addr[0];
+
+ framesize += desc->length;
+
+ /* Status != 0 means last buffer of frame */
+ if (desc->status)
+ break;
+
+ EndIndex++;
+ if (EndIndex == info->rx_buf_count)
+ EndIndex = 0;
+
+ if (EndIndex == info->current_rx_buf) {
+ /* all buffers have been 'used' but none mark */
+ /* the end of a frame. Reset buffers and receiver. */
+ if ( info->rx_enabled ){
+ spin_lock_irqsave(&info->lock,flags);
+ rx_start(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+ goto Cleanup;
+ }
+
+ }
+
+ /* check status of receive frame */
+
+ /* frame status is byte stored after frame data
+ *
+ * 7 EOM (end of msg), 1 = last buffer of frame
+ * 6 Short Frame, 1 = short frame
+ * 5 Abort, 1 = frame aborted
+ * 4 Residue, 1 = last byte is partial
+ * 3 Overrun, 1 = overrun occurred during frame reception
+ * 2 CRC, 1 = CRC error detected
+ *
+ */
+ status = desc->status;
+
+ /* ignore CRC bit if not using CRC (bit is undefined) */
+ /* Note:CRC is not save to data buffer */
+ if (info->params.crc_type == HDLC_CRC_NONE)
+ status &= ~BIT2;
+
+ if (framesize == 0 ||
+ (addr_field != 0xff && addr_field != info->params.addr_filter)) {
+ /* discard 0 byte frames, this seems to occur sometime
+ * when remote is idling flags.
+ */
+ rx_free_frame_buffers(info, StartIndex, EndIndex);
+ goto CheckAgain;
+ }
+
+ if (framesize < 2)
+ status |= BIT6;
+
+ if (status & (BIT6+BIT5+BIT3+BIT2)) {
+ /* received frame has errors,
+ * update counts and mark frame size as 0
+ */
+ if (status & BIT6)
+ info->icount.rxshort++;
+ else if (status & BIT5)
+ info->icount.rxabort++;
+ else if (status & BIT3)
+ info->icount.rxover++;
+ else
+ info->icount.rxcrc++;
+
+ framesize = 0;
+
+#ifdef CONFIG_SYNCLINK_SYNCPPP
+ info->netstats.rx_errors++;
+ info->netstats.rx_frame_errors++;
+#endif
+ }
+
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
+ __FILE__,__LINE__,info->device_name,status,framesize);
+
+ if ( debug_level >= DEBUG_LEVEL_DATA )
+ trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
+ MIN(framesize,SCABUFSIZE),0);
+
+ if (framesize) {
+ if (framesize > info->max_frame_size)
+ info->icount.rxlong++;
+ else {
+ /* copy dma buffer(s) to contiguous intermediate buffer */
+ int copy_count = framesize;
+ int index = StartIndex;
+ unsigned char *ptmp = info->tmp_rx_buf;
+ info->tmp_rx_buf_count = framesize;
+
+ info->icount.rxok++;
+
+ while(copy_count) {
+ int partial_count = MIN(copy_count,SCABUFSIZE);
+ memcpy( ptmp,
+ info->rx_buf_list_ex[index].virt_addr,
+ partial_count );
+ ptmp += partial_count;
+ copy_count -= partial_count;
+
+ if ( ++index == info->rx_buf_count )
+ index = 0;
+ }
+
+#ifdef CONFIG_SYNCLINK_SYNCPPP
+ if (info->netcount) {
+ /* pass frame to syncppp device */
+ sppp_rx_done(info,info->tmp_rx_buf,framesize);
+ }
+ else
+#endif
+ {
+ if ( tty && tty->ldisc.receive_buf ) {
+ /* Call the line discipline receive callback directly. */
+ tty->ldisc.receive_buf(tty,
+ info->tmp_rx_buf,
+ info->flag_buf,
+ framesize);
+ }
+ }
+ }
+ }
+ /* Free the buffers used by this frame. */
+ rx_free_frame_buffers( info, StartIndex, EndIndex );
+
+ ReturnCode = 1;
+
+Cleanup:
+ if ( info->rx_enabled && info->rx_overflow ) {
+ /* Receiver is enabled, but needs to restarted due to
+ * rx buffer overflow. If buffers are empty, restart receiver.
+ */
+ if (info->rx_buf_list[EndIndex].status == 0xff) {
+ spin_lock_irqsave(&info->lock,flags);
+ rx_start(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+ }
+
+ return ReturnCode;
+}
+
+/* load the transmit DMA buffer with data
+ */
+void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
+{
+ unsigned short copy_count;
+ unsigned int i = 0;
+ SCADESC *desc;
+ SCADESC_EX *desc_ex;
+
+ if ( debug_level >= DEBUG_LEVEL_DATA )
+ trace_block(info,buf, MIN(count,SCABUFSIZE), 1);
+
+ /* Copy source buffer to one or more DMA buffers, starting with
+ * the first transmit dma buffer.
+ */
+ for(i=0;;)
+ {
+ copy_count = MIN(count,SCABUFSIZE);
+
+ desc = &info->tx_buf_list[i];
+ desc_ex = &info->tx_buf_list_ex[i];
+
+ load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
+
+ desc->length = copy_count;
+ desc->status = 0;
+
+ buf += copy_count;
+ count -= copy_count;
+
+ if (!count)
+ break;
+
+ i++;
+ if (i >= info->tx_buf_count)
+ i = 0;
+ }
+
+ info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */
+ info->last_tx_buf = ++i;
+}
+
+int register_test(SLMP_INFO *info)
+{
+ static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
+ static unsigned int count = sizeof(testval)/sizeof(unsigned char);
+ unsigned int i;
+ int rc = TRUE;
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->lock,flags);
+ reset_port(info);
+
+ /* assume failure */
+ info->init_error = DiagStatus_AddressFailure;
+
+ /* Write bit patterns to various registers but do it out of */
+ /* sync, then read back and verify values. */
+
+ for (i = 0 ; i < count ; i++) {
+ write_reg(info, TMC, testval[i]);
+ write_reg(info, IDL, testval[(i+1)%count]);
+ write_reg(info, SA0, testval[(i+2)%count]);
+ write_reg(info, SA1, testval[(i+3)%count]);
+
+ if ( (read_reg(info, TMC) != testval[i]) ||
+ (read_reg(info, IDL) != testval[(i+1)%count]) ||
+ (read_reg(info, SA0) != testval[(i+2)%count]) ||
+ (read_reg(info, SA1) != testval[(i+3)%count]) )
+ {
+ rc = FALSE;
+ break;
+ }
+ }
+
+ reset_port(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ return rc;
+}
+
+int irq_test(SLMP_INFO *info)
+{
+ unsigned long timeout;
+ unsigned long flags;
+
+ unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
+
+ spin_lock_irqsave(&info->lock,flags);
+ reset_port(info);
+
+ /* assume failure */
+ info->init_error = DiagStatus_IrqFailure;
+ info->irq_occurred = FALSE;
+
+ /* setup timer0 on SCA0 to interrupt */
+
+ /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
+ write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
+
+ write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */
+ write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */
+
+
+ /* TMCS, Timer Control/Status Register
+ *
+ * 07 CMF, Compare match flag (read only) 1=match
+ * 06 ECMI, CMF Interrupt Enable: 1=enabled
+ * 05 Reserved, must be 0
+ * 04 TME, Timer Enable
+ * 03..00 Reserved, must be 0
+ *
+ * 0101 0000
+ */
+ write_reg(info, (unsigned char)(timer + TMCS), 0x50);
+
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ timeout=100;
+ while( timeout-- && !info->irq_occurred ) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(jiffies_from_ms(10));
+ }
+
+ spin_lock_irqsave(&info->lock,flags);
+ reset_port(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ return info->irq_occurred;
+}
+
+/* initialize individual SCA device (2 ports)
+ */
+int sca_init(SLMP_INFO *info)
+{
+ /* set wait controller to single mem partition (low), no wait states */
+ write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */
+ write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */
+ write_reg(info, WCRL, 0); /* wait controller low range */
+ write_reg(info, WCRM, 0); /* wait controller mid range */
+ write_reg(info, WCRH, 0); /* wait controller high range */
+
+ /* DPCR, DMA Priority Control
+ *
+ * 07..05 Not used, must be 0
+ * 04 BRC, bus release condition: 0=all transfers complete
+ * 03 CCC, channel change condition: 0=every cycle
+ * 02..00 PR<2..0>, priority 100=round robin
+ *
+ * 00000100 = 0x04
+ */
+ write_reg(info, DPCR, dma_priority);
+
+ /* DMA Master Enable, BIT7: 1=enable all channels */
+ write_reg(info, DMER, 0x80);
+
+ /* enable all interrupt classes */
+ write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
+ write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */
+ write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */
+
+ /* ITCR, interrupt control register
+ * 07 IPC, interrupt priority, 0=MSCI->DMA
+ * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
+ * 04 VOS, Vector Output, 0=unmodified vector
+ * 03..00 Reserved, must be 0
+ */
+ write_reg(info, ITCR, 0);
+
+ return TRUE;
+}
+
+/* initialize adapter hardware
+ */
+int init_adapter(SLMP_INFO *info)
+{
+ int i;
+
+ /* Set BIT30 of Local Control Reg 0x50 to reset SCA */
+ volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
+ u32 readval;
+
+ info->misc_ctrl_value |= BIT30;
+ *MiscCtrl = info->misc_ctrl_value;
+
+ /*
+ * Force at least 170ns delay before clearing
+ * reset bit. Each read from LCR takes at least
+ * 30ns so 10 times for 300ns to be safe.
+ */
+ for(i=0;i<10;i++)
+ readval = *MiscCtrl;
+
+ info->misc_ctrl_value &= ~BIT30;
+ *MiscCtrl = info->misc_ctrl_value;
+
+ /* init control reg (all DTRs off, all clksel=input) */
+ info->ctrlreg_value = 0xaa;
+ write_control_reg(info);
+
+ {
+ volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
+ lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
+
+ switch(read_ahead_count)
+ {
+ case 16:
+ lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
+ break;
+ case 8:
+ lcr1_brdr_value |= BIT5 + BIT4;
+ break;
+ case 4:
+ lcr1_brdr_value |= BIT5 + BIT3;
+ break;
+ case 0:
+ lcr1_brdr_value |= BIT5;
+ break;
+ }
+
+ *LCR1BRDR = lcr1_brdr_value;
+ *MiscCtrl = misc_ctrl_value;
+ }
+
+ sca_init(info->port_array[0]);
+ sca_init(info->port_array[2]);
+
+ return TRUE;
+}
+
+/* Loopback an HDLC frame to test the hardware
+ * interrupt and DMA functions.
+ */
+int loopback_test(SLMP_INFO *info)
+{
+#define TESTFRAMESIZE 20
+
+ unsigned long timeout;
+ u16 count = TESTFRAMESIZE;
+ unsigned char buf[TESTFRAMESIZE];
+ int rc = FALSE;
+ unsigned long flags;
+
+ struct tty_struct *oldtty = info->tty;
+ u32 speed = info->params.clock_speed;
+
+ info->params.clock_speed = 3686400;
+ info->tty = 0;
+
+ /* assume failure */
+ info->init_error = DiagStatus_DmaFailure;
+
+ /* build and send transmit frame */
+ for (count = 0; count < TESTFRAMESIZE;++count)
+ buf[count] = (unsigned char)count;
+
+ memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
+
+ /* program hardware for HDLC and enabled receiver */
+ spin_lock_irqsave(&info->lock,flags);
+ hdlc_mode(info);
+ enable_loopback(info,1);
+ rx_start(info);
+ info->tx_count = count;
+ tx_load_dma_buffer(info,buf,count);
+ tx_start(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ /* wait for receive complete */
+ /* Set a timeout for waiting for interrupt. */
+ for ( timeout = 100; timeout; --timeout ) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(jiffies_from_ms(10));
+
+ if (rx_get_frame(info)) {
+ rc = TRUE;
+ break;
+ }
+ }
+
+ /* verify received frame length and contents */
+ if (rc == TRUE &&
+ ( info->tmp_rx_buf_count != count ||
+ memcmp(buf, info->tmp_rx_buf,count))) {
+ rc = FALSE;
+ }
+
+ spin_lock_irqsave(&info->lock,flags);
+ reset_adapter(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ info->params.clock_speed = speed;
+ info->tty = oldtty;
+
+ return rc;
+}
+
+/* Perform diagnostics on hardware
+ */
+int adapter_test( SLMP_INFO *info )
+{
+ unsigned long flags;
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):Testing device %s\n",
+ __FILE__,__LINE__,info->device_name );
+
+ spin_lock_irqsave(&info->lock,flags);
+ init_adapter(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ info->port_array[0]->port_count = 0;
+
+ if ( register_test(info->port_array[0]) &&
+ register_test(info->port_array[1])) {
+
+ info->port_array[0]->port_count = 2;
+
+ if ( register_test(info->port_array[2]) &&
+ register_test(info->port_array[3]) )
+ info->port_array[0]->port_count += 2;
+ }
+ else {
+ printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
+ __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
+ return -ENODEV;
+ }
+
+ if ( !irq_test(info->port_array[0]) ||
+ !irq_test(info->port_array[1]) ||
+ (info->port_count == 4 && !irq_test(info->port_array[2])) ||
+ (info->port_count == 4 && !irq_test(info->port_array[3]))) {
+ printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
+ __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
+ return -ENODEV;
+ }
+
+ if (!loopback_test(info->port_array[0]) ||
+ !loopback_test(info->port_array[1]) ||
+ (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
+ (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
+ printk( "%s(%d):DMA test failure for device %s\n",
+ __FILE__,__LINE__,info->device_name);
+ return -ENODEV;
+ }
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):device %s passed diagnostics\n",
+ __FILE__,__LINE__,info->device_name );
+
+ info->port_array[0]->init_error = 0;
+ info->port_array[1]->init_error = 0;
+ if ( info->port_count > 2 ) {
+ info->port_array[2]->init_error = 0;
+ info->port_array[3]->init_error = 0;
+ }
+
+ return 0;
+}
+
+/* Test the shared memory on a PCI adapter.
+ */
+int memory_test(SLMP_INFO *info)
+{
+ static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
+ 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
+ unsigned long count = sizeof(testval)/sizeof(unsigned long);
+ unsigned long i;
+ unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
+ unsigned long * addr = (unsigned long *)info->memory_base;
+
+ /* Test data lines with test pattern at one location. */
+
+ for ( i = 0 ; i < count ; i++ ) {
+ *addr = testval[i];
+ if ( *addr != testval[i] )
+ return FALSE;
+ }
+
+ /* Test address lines with incrementing pattern over */
+ /* entire address range. */
+
+ for ( i = 0 ; i < limit ; i++ ) {
+ *addr = i * 4;
+ addr++;
+ }
+
+ addr = (unsigned long *)info->memory_base;
+
+ for ( i = 0 ; i < limit ; i++ ) {
+ if ( *addr != i * 4 )
+ return FALSE;
+ addr++;
+ }
+
+ memset( info->memory_base, 0, SCA_MEM_SIZE );
+ return TRUE;
+}
+
+/* Load data into PCI adapter shared memory.
+ *
+ * The PCI9050 releases control of the local bus
+ * after completing the current read or write operation.
+ *
+ * While the PCI9050 write FIFO not empty, the
+ * PCI9050 treats all of the writes as a single transaction
+ * and does not release the bus. This causes DMA latency problems
+ * at high speeds when copying large data blocks to the shared memory.
+ *
+ * This function breaks a write into multiple transations by
+ * interleaving a read which flushes the write FIFO and 'completes'
+ * the write transation. This allows any pending DMA request to gain control
+ * of the local bus in a timely fasion.
+ */
+void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
+{
+ /* A load interval of 16 allows for 4 32-bit writes at */
+ /* 136ns each for a maximum latency of 542ns on the local bus.*/
+
+ unsigned short interval = count / sca_pci_load_interval;
+ unsigned short i;
+
+ for ( i = 0 ; i < interval ; i++ )
+ {
+ memcpy(dest, src, sca_pci_load_interval);
+ read_status_reg(info);
+ dest += sca_pci_load_interval;
+ src += sca_pci_load_interval;
+ }
+
+ memcpy(dest, src, count % sca_pci_load_interval);
+}
+
+void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
+{
+ int i;
+ int linecount;
+ if (xmit)
+ printk("%s tx data:\n",info->device_name);
+ else
+ printk("%s rx data:\n",info->device_name);
+
+ while(count) {
+ if (count > 16)
+ linecount = 16;
+ else
+ linecount = count;
+
+ for(i=0;i<linecount;i++)
+ printk("%02X ",(unsigned char)data[i]);
+ for(;i<17;i++)
+ printk(" ");
+ for(i=0;i<linecount;i++) {
+ if (data[i]>=040 && data[i]<=0176)
+ printk("%c",data[i]);
+ else
+ printk(".");
+ }
+ printk("\n");
+
+ data += linecount;
+ count -= linecount;
+ }
+} /* end of trace_block() */
+
+/* called when HDLC frame times out
+ * update stats and do tx completion processing
+ */
+void tx_timeout(unsigned long context)
+{
+ SLMP_INFO *info = (SLMP_INFO*)context;
+ unsigned long flags;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):%s tx_timeout()\n",
+ __FILE__,__LINE__,info->device_name);
+ if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
+ info->icount.txtimeout++;
+ }
+ spin_lock_irqsave(&info->lock,flags);
+ info->tx_active = 0;
+ info->tx_count = info->tx_put = info->tx_get = 0;
+
+ spin_unlock_irqrestore(&info->lock,flags);
+
+#ifdef CONFIG_SYNCLINK_SYNCPPP
+ if (info->netcount)
+ sppp_tx_done(info);
+ else
+#endif
+ bh_transmit(info);
+}
+
+/* called to periodically check the DSR/RI modem signal input status
+ */
+void status_timeout(unsigned long context)
+{
+ u16 status = 0;
+ SLMP_INFO *info = (SLMP_INFO*)context;
+ unsigned long flags;
+ unsigned char delta;
+
+
+ spin_lock_irqsave(&info->lock,flags);
+ get_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ /* check for DSR/RI state change */
+
+ delta = info->old_signals ^ info->serial_signals;
+ info->old_signals = info->serial_signals;
+
+ if (delta & SerialSignal_DSR)
+ status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
+
+ if (delta & SerialSignal_RI)
+ status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
+
+ if (delta & SerialSignal_DCD)
+ status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
+
+ if (delta & SerialSignal_CTS)
+ status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
+
+ if (status)
+ isr_io_pin(info,status);
+
+ info->status_timer.data = (unsigned long)info;
+ info->status_timer.function = status_timeout;
+ info->status_timer.expires = jiffies + jiffies_from_ms(10);
+ add_timer(&info->status_timer);
+}
+
+
+/* Register Access Routines -
+ * All registers are memory mapped
+ */
+#define CALC_REGADDR() \
+ unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
+ if (info->port_num > 1) \
+ RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \
+ if ( info->port_num & 1) { \
+ if (Addr > 0x7f) \
+ RegAddr += 0x40; /* DMA access */ \
+ else if (Addr > 0x1f && Addr < 0x60) \
+ RegAddr += 0x20; /* MSCI access */ \
+ }
+
+
+unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
+{
+ CALC_REGADDR();
+ return *RegAddr;
+}
+void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
+{
+ CALC_REGADDR();
+ *RegAddr = Value;
+}
+
+u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
+{
+ CALC_REGADDR();
+ return *((u16 *)RegAddr);
+}
+
+void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
+{
+ CALC_REGADDR();
+ *((u16 *)RegAddr) = Value;
+}
+
+unsigned char read_status_reg(SLMP_INFO * info)
+{
+ unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
+ return *RegAddr;
+}
+
+void write_control_reg(SLMP_INFO * info)
+{
+ unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
+ *RegAddr = info->port_array[0]->ctrlreg_value;
+}
+
+
+static int __devinit synclinkmp_init_one (struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ if (pci_enable_device(dev)) {
+ printk("error enabling pci device %p\n", dev);
+ return -EIO;
+ }
+ device_init( ++synclinkmp_adapter_count, dev );
+ return 0;
+}
+
+static void __devexit synclinkmp_remove_one (struct pci_dev *dev)
+{
+}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)