patch-2.4.13 linux/drivers/message/i2o/i2o_pci.c

• Lines: 392
• Date: Mon Oct 22 08:39:56 2001
• Orig file: v2.4.12/linux/drivers/message/i2o/i2o_pci.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.4.12/linux/drivers/message/i2o/i2o_pci.c linux/drivers/message/i2o/i2o_pci.c
@@ -0,0 +1,391 @@
+/*
+ *	Find I2O capable controllers on the PCI bus, and register/install
+ *	them with the I2O layer
+ *
+ *	(C) Copyright 1999   Red Hat Software
+ *	
+ *	Written by Alan Cox, Building Number Three Ltd
+ * 	Modified by Deepak Saxena <deepak@plexity.net>
+ * 	Modified by Boji T Kannanthanam <boji.t.kannanthanam@intel.com>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ * 	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	TODO:
+ *		Support polled I2O PCI controllers. 
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/i2o.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif // CONFIG_MTRR
+
+#ifdef MODULE
+/*
+ * Core function table
+ * See <include/linux/i2o.h> for an explanation
+ */
+static struct i2o_core_func_table *core;
+
+/* Core attach function */
+extern int i2o_pci_core_attach(struct i2o_core_func_table *);
+extern void i2o_pci_core_detach(void);
+#endif /* MODULE */
+
+/*
+ *	Free bus specific resources
+ */
+static void i2o_pci_dispose(struct i2o_controller *c)
+{
+	I2O_IRQ_WRITE32(c,0xFFFFFFFF);
+	if(c->bus.pci.irq > 0)
+		free_irq(c->bus.pci.irq, c);
+	iounmap(((u8 *)c->post_port)-0x40);
+
+#ifdef CONFIG_MTRR
+	if(c->bus.pci.mtrr_reg0 > 0)
+		mtrr_del(c->bus.pci.mtrr_reg0, 0, 0);
+	if(c->bus.pci.mtrr_reg1 > 0)
+		mtrr_del(c->bus.pci.mtrr_reg1, 0, 0);
+#endif
+}
+
+/*
+ *	No real bus specific handling yet (note that later we will
+ *	need to 'steal' PCI devices on i960 mainboards)
+ */
+ 
+static int i2o_pci_bind(struct i2o_controller *c, struct i2o_device *dev)
+{
+	MOD_INC_USE_COUNT;
+	return 0;
+}
+
+static int i2o_pci_unbind(struct i2o_controller *c, struct i2o_device *dev)
+{
+	MOD_DEC_USE_COUNT;
+	return 0;
+}
+
+/*
+ * Bus specific enable/disable functions
+ */
+static void i2o_pci_enable(struct i2o_controller *c)
+{
+	I2O_IRQ_WRITE32(c, 0);
+	c->enabled = 1;
+}
+
+static void i2o_pci_disable(struct i2o_controller *c)
+{
+	I2O_IRQ_WRITE32(c, 0xFFFFFFFF);
+	c->enabled = 0;
+}
+
+/*
+ *	Bus specific interrupt handler
+ */
+ 
+static void i2o_pci_interrupt(int irq, void *dev_id, struct pt_regs *r)
+{
+	struct i2o_controller *c = dev_id;
+#ifdef MODULE
+	core->run_queue(c);
+#else
+	i2o_run_queue(c);
+#endif /* MODULE */
+}	
+
+/*
+ *	Install a PCI (or in theory AGP) i2o controller
+ *
+ * TODO: Add support for polled controllers
+ */
+int __init i2o_pci_install(struct pci_dev *dev)
+{
+	struct i2o_controller *c=kmalloc(sizeof(struct i2o_controller),
+						GFP_KERNEL);
+	u8 *mem;
+	u32 memptr = 0;
+	u32 size;
+	
+	int i;
+
+	if(c==NULL)
+	{
+		printk(KERN_ERR "i2o: Insufficient memory to add controller.\n");
+		return -ENOMEM;
+	}
+	memset(c, 0, sizeof(*c));
+
+	for(i=0; i<6; i++)
+	{
+		/* Skip I/O spaces */
+		if(!(pci_resource_flags(dev, i) & IORESOURCE_IO))
+		{
+			memptr = pci_resource_start(dev, i);
+			break;
+		}
+	}
+	
+	if(i==6)
+	{
+		printk(KERN_ERR "i2o: I2O controller has no memory regions defined.\n");
+		kfree(c);
+		return -EINVAL;
+	}
+	
+	size = dev->resource[i].end-dev->resource[i].start+1;	
+	/* Map the I2O controller */
+	
+	printk(KERN_INFO "i2o: PCI I2O controller at 0x%08X size=%d\n", memptr, size);
+	mem = ioremap(memptr, size);
+	if(mem==NULL)
+	{
+		printk(KERN_ERR "i2o: Unable to map controller.\n");
+		kfree(c);
+		return -EINVAL;
+	}
+
+	c->bus.pci.irq = -1;
+	c->bus.pci.queue_buggy = 0;
+	c->bus.pci.dpt = 0;
+	c->bus.pci.short_req = 0;
+	c->pdev = dev;
+
+	c->irq_mask = (volatile u32 *)(mem+0x34);
+	c->post_port = (volatile u32 *)(mem+0x40);
+	c->reply_port = (volatile u32 *)(mem+0x44);
+
+	c->mem_phys = memptr;
+	c->mem_offset = (u32)mem;
+	c->destructor = i2o_pci_dispose;
+	
+	c->bind = i2o_pci_bind;
+	c->unbind = i2o_pci_unbind;
+	c->bus_enable = i2o_pci_enable;
+	c->bus_disable = i2o_pci_disable;
+	
+	c->type = I2O_TYPE_PCI;
+
+	/*
+	 *	Cards that fall apart if you hit them with large I/O
+	 *	loads...
+	 */
+	 
+	if(dev->vendor == PCI_VENDOR_ID_NCR && dev->device == 0x0630)
+	{
+		c->bus.pci.short_req=1;
+		printk(KERN_INFO "I2O: Symbios FC920 workarounds activated.\n");
+	}
+	if(dev->subsystem_vendor == PCI_VENDOR_ID_PROMISE)
+	{
+		c->bus.pci.queue_buggy=1;
+		printk(KERN_INFO "I2O: Promise workarounds activated.\n");
+	}
+
+	/*
+	 *	Cards that go bananas if you quiesce them before you reset
+	 *	them
+	 */
+	 
+	if(dev->vendor == PCI_VENDOR_ID_DPT)
+		c->bus.pci.dpt=1;
+	
+	/* 
+	 * Enable Write Combining MTRR for IOP's memory region
+	 */
+#ifdef CONFIG_MTRR
+	c->bus.pci.mtrr_reg0 =
+		mtrr_add(c->mem_phys, size, MTRR_TYPE_WRCOMB, 1);
+/*
+* If it is an INTEL i960 I/O processor then set the first 64K to Uncacheable
+* since the region contains the Messaging unit which shouldn't be cached.
+*/
+	c->bus.pci.mtrr_reg1 = -1;
+	if(dev->vendor == PCI_VENDOR_ID_INTEL || dev->vendor == PCI_VENDOR_ID_DPT)
+	{
+		printk(KERN_INFO "I2O: MTRR workaround for Intel i960 processor\n"); 
+		c->bus.pci.mtrr_reg1 =	mtrr_add(c->mem_phys, 65536, MTRR_TYPE_UNCACHABLE, 1);
+		if(c->bus.pci.mtrr_reg1< 0)
+		{
+			printk(KERN_INFO "i2o_pci: Error in setting MTRR_TYPE_UNCACHABLE\n");
+			mtrr_del(c->bus.pci.mtrr_reg0, c->mem_phys, size);
+			c->bus.pci.mtrr_reg0 = -1;
+		}
+	}
+
+#endif
+
+	I2O_IRQ_WRITE32(c,0xFFFFFFFF);
+
+#ifdef MODULE
+	i = core->install(c);
+#else
+	i = i2o_install_controller(c);
+#endif /* MODULE */
+	
+	if(i<0)
+	{
+		printk(KERN_ERR "i2o: Unable to install controller.\n");
+		kfree(c);
+		iounmap(mem);
+		return i;
+	}
+
+	c->bus.pci.irq = dev->irq;
+	if(c->bus.pci.irq)
+	{
+		i=request_irq(dev->irq, i2o_pci_interrupt, SA_SHIRQ,
+			c->name, c);
+		if(i<0)
+		{
+			printk(KERN_ERR "%s: unable to allocate interrupt %d.\n",
+				c->name, dev->irq);
+			c->bus.pci.irq = -1;
+#ifdef MODULE
+			core->delete(c);
+#else
+			i2o_delete_controller(c);
+#endif /* MODULE */	
+			iounmap(mem);
+			return -EBUSY;
+		}
+	}
+
+	printk(KERN_INFO "%s: Installed at IRQ%d\n", c->name, dev->irq);
+	I2O_IRQ_WRITE32(c,0x0);
+	c->enabled = 1;
+	return 0;	
+}
+
+int __init i2o_pci_scan(void)
+{
+	struct pci_dev *dev;
+	int count=0;
+	
+	printk(KERN_INFO "i2o: Checking for PCI I2O controllers...\n");
+
+	pci_for_each_dev(dev)	
+	{
+		if((dev->class>>8)!=PCI_CLASS_INTELLIGENT_I2O)
+			continue;
+		if(dev->vendor == PCI_VENDOR_ID_DPT)
+		{
+			if(dev->device == 0xA501 || dev->device == 0xA511)
+			{
+				printk(KERN_INFO "i2o: Skipping Adaptec/DPT I2O raid with preferred native driver.\n");
+				continue;
+			}
+		}
+		if((dev->class&0xFF)>1)
+		{
+			printk(KERN_INFO "i2o: I2O Controller found but does not support I2O 1.5 (skipping).\n");
+			continue;
+		}
+		if (pci_enable_device(dev))
+			continue;
+		printk(KERN_INFO "i2o: I2O controller on bus %d at %d.\n",
+			dev->bus->number, dev->devfn);
+		pci_set_master(dev);
+		if(i2o_pci_install(dev)==0)
+			count++;
+	}
+	if(count)
+		printk(KERN_INFO "i2o: %d I2O controller%s found and installed.\n", count,
+			count==1?"":"s");
+	return count?count:-ENODEV;
+}
+
+#ifdef I2O_HOTPLUG_SUPPORT
+/*
+ * Activate a newly found PCI I2O controller
+ * Not used now, but will be needed in future for
+ * hot plug PCI support
+ */
+static void i2o_pci_activate(i2o_controller * c)
+{
+	int i=0;
+	struct i2o_controller *c;
+	
+	if(c->type == I2O_TYPE_PCI)
+	{
+		I2O_IRQ_WRITE32(c,0);
+#ifdef MODULE
+		if(core->activate(c))
+#else
+		if(i2o_activate_controller(c))
+#endif /* MODULE */
+		{
+			printk("%s: Failed to initialize.\n", c->name);
+#ifdef MODULE
+			core->unlock(c);
+			core->delete(c);
+#else
+			i2o_unlock_controller(c);
+			i2o_delete_controller(c);
+#endif
+			continue;
+		}
+	}
+}
+#endif // I2O_HOTPLUG_SUPPORT
+
+#ifdef MODULE
+
+int i2o_pci_core_attach(struct i2o_core_func_table *table)
+{
+	MOD_INC_USE_COUNT;
+
+	core = table;
+
+	return i2o_pci_scan();
+}
+
+void i2o_pci_core_detach(void)
+{
+	core = NULL;
+
+	MOD_DEC_USE_COUNT;
+}
+
+int init_module(void)
+{
+	printk(KERN_INFO "Linux I2O PCI support (c) 1999 Red Hat Software.\n");
+	
+	core = NULL;
+
+ 	return 0;
+ 
+}
+
+void cleanup_module(void)
+{
+}
+
+EXPORT_SYMBOL(i2o_pci_core_attach);
+EXPORT_SYMBOL(i2o_pci_core_detach);
+
+MODULE_AUTHOR("Red Hat Software");
+MODULE_DESCRIPTION("I2O PCI Interface");
+MODULE_LICENSE("GPL");
+
+
+#else
+void __init i2o_pci_init(void)
+{
+	printk(KERN_INFO "Linux I2O PCI support (c) 1999 Red Hat Software.\n");
+	i2o_pci_scan();
+}
+#endif