patch-2.2.8 linux/include/asm-arm/arch-vnc/time.h

• Lines: 233
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.2.7/linux/include/asm-arm/arch-vnc/time.h
• Orig date: Fri Jan 8 22:36:22 1999

diff -u --recursive --new-file v2.2.7/linux/include/asm-arm/arch-vnc/time.h linux/include/asm-arm/arch-vnc/time.h
@@ -1,232 +0,0 @@
-/*
- * linux/include/asm-arm/arch-vnc/time.h
- *
- * Copyright (c) 1997 Corel Computer Corp.
- * Slight modifications to bring in line with ebsa285 port.
- *  -- Russell King.
- *  Added LED driver (based on the ebsa285 code) - Alex Holden 28/12/98.
- */
-
-#include <linux/config.h>
-#include <linux/mc146818rtc.h>
-
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#undef IRQ_TIMER
-#define IRQ_TIMER		IRQ_TIMER4
-
-#define mSEC_10_from_14 ((14318180 + 100) / 200)
-
-extern __inline__ unsigned long gettimeoffset (void)
-{
-	int count;
-
-	static int count_p = (mSEC_10_from_14/6);    /* for the first call after boot */
-	static unsigned long jiffies_p = 0;
-
-	/*
-	 * cache volatile jiffies temporarily; we have IRQs turned off. 
-	 */
-	unsigned long jiffies_t;
-
-	/* timer count may underflow right here */
-	outb_p(0x00, 0x43);	/* latch the count ASAP */
-
-	count = inb_p(0x40);	/* read the latched count */
-
-	/*
-	 * We do this guaranteed double memory access instead of a _p 
-	 * postfix in the previous port access. Wheee, hackady hack
-	 */
- 	jiffies_t = jiffies;
-
-	count |= inb_p(0x40) << 8;
-
-	/* Detect timer underflows.  If we haven't had a timer tick since 
-	   the last time we were called, and time is apparently going
-	   backwards, the counter must have wrapped during this routine. */
-	if ((jiffies_t == jiffies_p) && (count > count_p))
-		count -= (mSEC_10_from_14/6);
-	else
-		jiffies_p = jiffies_t;
-
-	count_p = count;
-
-	count = (((mSEC_10_from_14/6)-1) - count) * tick;
-	count = (count + (mSEC_10_from_14/6)/2) / (mSEC_10_from_14/6);
-
-	return count;
-}
-
-extern __inline__ int reset_timer (void)
-{
-#ifdef CONFIG_LEDS
-	static unsigned int count = 50;
-	static int last_pid;
-
-	if (current->pid != last_pid) {
-		last_pid = current->pid;
-		if (last_pid)
-			leds_event(led_idle_end);
-		else
-			leds_event(led_idle_start);
-	}
-
-	if (--count == 0) {
-		count = 50;
-		leds_event(led_timer);
-	}
-#endif
-	return 1;
-}
-
-unsigned long set_rtc_mmss(unsigned long nowtime)
-{
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-	unsigned char save_control, save_freq_select;
-
-	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
-	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
-	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-	cmos_minutes = CMOS_READ(RTC_MINUTES);
-	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		BCD_TO_BIN(cmos_minutes);
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
-		real_minutes += 30;		/* correct for half hour time zone */
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			BIN_TO_BCD(real_seconds);
-			BIN_TO_BCD(real_minutes);
-		}
-		CMOS_WRITE(real_seconds,RTC_SECONDS);
-		CMOS_WRITE(real_minutes,RTC_MINUTES);
-	} else
-		retval = -1;
-
-	/* The following flags have to be released exactly in this order,
-	 * otherwise the DS12887 (popular MC146818A clone with integrated
-	 * battery and quartz) will not reset the oscillator and will not
-	 * update precisely 500 ms later. You won't find this mentioned in
-	 * the Dallas Semiconductor data sheets, but who believes data
-	 * sheets anyway ...                           -- Markus Kuhn
-	 */
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-
-	return retval;
-}
-
-/*
- * We don't have a RTC to update!
- */
-extern __inline__ void update_rtc(void)
-{
-	static long last_rtc_update = 0;	/* last time the cmos clock got updated */
-
-	/* If we have an externally synchronized linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes.  Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (time_state != TIME_BAD && xtime.tv_sec > last_rtc_update + 660 &&
-	    xtime.tv_usec > 50000 - (tick >> 1) &&
-	    xtime.tv_usec < 50000 + (tick >> 1)) {
-		if (set_rtc_mmss(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-	}
-}
-
-extern __inline__ unsigned long get_cmos_time(void)
-{
-	unsigned int year, mon, day, hour, min, sec;
-	int i;
-
-	// check to see if the RTC makes sense.....
-	if ((CMOS_READ(RTC_VALID) & RTC_VRT) == 0)
-		return mktime(1970, 1, 1, 0, 0, 0);
-
-	/* The Linux interpretation of the CMOS clock register contents:
-	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
-	 * RTC registers show the second which has precisely just started.
-	 * Let's hope other operating systems interpret the RTC the same way.
-	 */
-	/* read RTC exactly on falling edge of update flag */
-	for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
-		if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
-			break;
-
-	for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */
-		if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
-			break;
-
-	do { /* Isn't this overkill ? UIP above should guarantee consistency */
-		sec = CMOS_READ(RTC_SECONDS);
-		min = CMOS_READ(RTC_MINUTES);
-		hour = CMOS_READ(RTC_HOURS);
-		day = CMOS_READ(RTC_DAY_OF_MONTH);
-		mon = CMOS_READ(RTC_MONTH);
-		year = CMOS_READ(RTC_YEAR);
-	} while (sec != CMOS_READ(RTC_SECONDS));
-
-	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
-	}
-	if ((year += 1900) < 1970)
-		year += 100;
-	return mktime(year, mon, day, hour, min, sec);
-}
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-extern __inline__ unsigned long setup_timer (void)
-{
-	unsigned int c;
-
-	/* Turn on the RTC */
-	outb(13, 0x70);
-	if ((inb(0x71) & 0x80) == 0)
-		printk("RTC: *** warning: CMOS battery bad\n");
-
-	outb(10, 0x70);		/* select control reg */
-	outb(32, 0x71);		/* make sure the divider is set */
-	outb(11, 0x70);		/* select other control reg */
-	c = inb(0x71) & 0xfb;	/* read it */
-	outb(11, 0x70);
-	outb(c | 2, 0x71);	/* turn on BCD counting and 24 hour clock mode */
-	
-	/* enable PIT timer */
-	/* set for periodic (4) and LSB/MSB write (0x30) */
-	outb(0x34, 0x43);
-	outb((mSEC_10_from_14/6) & 0xFF, 0x40);
-	outb((mSEC_10_from_14/6) >> 8, 0x40);
-
-	/*
-	 * Default the date to 1 Jan 1970 00:00:00
-	 * You will have to run a time daemon to set the
-	 * clock correctly at bootup
-	 */
-	return get_cmos_time();
-}