patch-2.2.15 linux/net/irda/ircomm/ircomm_tty_ioctl.c

Next file: linux/net/irda/ircomm/irvtd_driver.c
Previous file: linux/net/irda/ircomm/ircomm_tty_attach.c
Back to the patch index
Back to the overall index

diff -u --new-file --recursive --exclude-from ../../exclude v2.2.14/net/irda/ircomm/ircomm_tty_ioctl.c linux/net/irda/ircomm/ircomm_tty_ioctl.c
@@ -0,0 +1,465 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_tty_ioctl.c
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Thu Jun 10 14:39:09 1999
+ * Modified at:   Wed Jan  5 14:46:17 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/termios.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+
+#include <asm/segment.h>
+#include <asm/uaccess.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+
+#include <net/irda/ircomm_core.h>
+#include <net/irda/ircomm_param.h>
+#include <net/irda/ircomm_tty_attach.h>
+#include <net/irda/ircomm_tty.h>
+
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+/*
+ * Function ircomm_tty_change_speed (driver)
+ *
+ *    Change speed of the driver. If the remote device is a DCE, then this
+ *    should make it change the speed of its serial port
+ */
+void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
+{
+	unsigned cflag, cval;
+	int baud;
+
+	IRDA_DEBUG(2, __FUNCTION__ "()\n");
+
+	if (!self->tty || !self->tty->termios || !self->ircomm)
+		return;
+
+	cflag = self->tty->termios->c_cflag;
+
+	/*  byte size and parity */
+	switch (cflag & CSIZE) {
+	case CS5: cval = IRCOMM_WSIZE_5; break;
+	case CS6: cval = IRCOMM_WSIZE_6; break;
+	case CS7: cval = IRCOMM_WSIZE_7; break;
+	case CS8: cval = IRCOMM_WSIZE_8; break;
+	default:  cval = IRCOMM_WSIZE_5; break;
+	}
+	if (cflag & CSTOPB)
+		cval |= IRCOMM_2_STOP_BIT;
+	
+	if (cflag & PARENB)
+		cval |= IRCOMM_PARITY_ENABLE;
+	if (!(cflag & PARODD))
+		cval |= IRCOMM_PARITY_EVEN;
+
+	/* Determine divisor based on baud rate */
+	baud = tty_get_baud_rate(self->tty);
+	if (!baud)
+		baud = 9600;	/* B0 transition handled in rs_set_termios */
+
+	self->settings.data_rate = baud;
+	ircomm_param_request(self, IRCOMM_DATA_RATE, FALSE);
+	
+	/* CTS flow control flag and modem status interrupts */
+	if (cflag & CRTSCTS) {
+		self->flags |= ASYNC_CTS_FLOW;
+		self->settings.flow_control |= IRCOMM_RTS_CTS_IN;
+	} else {
+		self->flags &= ~ASYNC_CTS_FLOW;
+		self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN;
+	}
+	if (cflag & CLOCAL)
+		self->flags &= ~ASYNC_CHECK_CD;
+	else
+		self->flags |= ASYNC_CHECK_CD;
+#if 0	
+	/*
+	 * Set up parity check flag
+	 */
+
+	if (I_INPCK(self->tty))
+		driver->read_status_mask |= LSR_FE | LSR_PE;
+	if (I_BRKINT(driver->tty) || I_PARMRK(driver->tty))
+		driver->read_status_mask |= LSR_BI;
+	
+	/*
+	 * Characters to ignore
+	 */
+	driver->ignore_status_mask = 0;
+	if (I_IGNPAR(driver->tty))
+		driver->ignore_status_mask |= LSR_PE | LSR_FE;
+
+	if (I_IGNBRK(self->tty)) {
+		self->ignore_status_mask |= LSR_BI;
+		/*
+		 * If we're ignore parity and break indicators, ignore 
+		 * overruns too. (For real raw support).
+		 */
+		if (I_IGNPAR(self->tty)) 
+			self->ignore_status_mask |= LSR_OE;
+	}
+#endif
+	self->settings.data_format = cval;
+
+	ircomm_param_request(self, IRCOMM_DATA_FORMAT, FALSE);
+ 	ircomm_param_request(self, IRCOMM_FLOW_CONTROL, TRUE);
+}
+
+/*
+ * Function ircomm_tty_set_termios (tty, old_termios)
+ *
+ *    This routine allows the tty driver to be notified when device's
+ *    termios settings have changed.  Note that a well-designed tty driver
+ *    should be prepared to accept the case where old == NULL, and try to
+ *    do something rational.
+ */
+void ircomm_tty_set_termios(struct tty_struct *tty, 
+			    struct termios *old_termios)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+	unsigned int cflag = tty->termios->c_cflag;
+
+	IRDA_DEBUG(2, __FUNCTION__ "()\n");
+
+	if ((cflag == old_termios->c_cflag) && 
+	    (RELEVANT_IFLAG(tty->termios->c_iflag) == 
+	     RELEVANT_IFLAG(old_termios->c_iflag)))
+	{
+		return;
+	}
+
+	ircomm_tty_change_speed(self);
+
+	/* Handle transition to B0 status */
+	if ((old_termios->c_cflag & CBAUD) &&
+	    !(cflag & CBAUD)) {
+		self->settings.dte &= ~(IRCOMM_DTR|IRCOMM_RTS);
+		ircomm_param_request(self, IRCOMM_DTE, TRUE);
+	}
+	
+	/* Handle transition away from B0 status */
+	if (!(old_termios->c_cflag & CBAUD) &&
+	    (cflag & CBAUD)) {
+		self->settings.dte |= IRCOMM_DTR;
+		if (!(tty->termios->c_cflag & CRTSCTS) || 
+		    !test_bit(TTY_THROTTLED, &tty->flags)) {
+			self->settings.dte |= IRCOMM_RTS;
+		}
+		ircomm_param_request(self, IRCOMM_DTE, TRUE);
+	}
+	
+	/* Handle turning off CRTSCTS */
+	if ((old_termios->c_cflag & CRTSCTS) &&
+	    !(tty->termios->c_cflag & CRTSCTS)) 
+	{
+		tty->hw_stopped = 0;
+		ircomm_tty_start(tty);
+	}
+}
+
+/*
+ * Function ircomm_tty_get_modem_info (self, value)
+ *
+ *    
+ *
+ */
+static int ircomm_tty_get_modem_info(struct ircomm_tty_cb *self, 
+				     unsigned int *value)
+{
+	unsigned int result;
+
+	IRDA_DEBUG(2, __FUNCTION__ "()\n");
+
+	result =  ((self->settings.dte & IRCOMM_RTS) ? TIOCM_RTS : 0)
+		| ((self->settings.dte & IRCOMM_DTR) ? TIOCM_DTR : 0)
+		| ((self->settings.dce & IRCOMM_CD)  ? TIOCM_CAR : 0)
+		| ((self->settings.dce & IRCOMM_RI)  ? TIOCM_RNG : 0)
+		| ((self->settings.dce & IRCOMM_DSR) ? TIOCM_DSR : 0)
+		| ((self->settings.dce & IRCOMM_CTS) ? TIOCM_CTS : 0);
+
+	return put_user(result, value);
+}
+
+/*
+ * Function set_modem_info (driver, cmd, value)
+ *
+ *    
+ *
+ */
+static int ircomm_tty_set_modem_info(struct ircomm_tty_cb *self, 
+				     unsigned int cmd, unsigned int *value)
+{ 
+	unsigned int arg;
+	__u8 old_rts, old_dtr;
+	int error;
+
+	IRDA_DEBUG(2, __FUNCTION__ "()\n");
+
+	ASSERT(self != NULL, return -1;);
+	ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	error = get_user(arg, value);
+	if (error)
+		return error;
+
+	old_rts = self->settings.dte & IRCOMM_RTS;
+	old_dtr = self->settings.dte & IRCOMM_DTR;
+
+	switch (cmd) {
+	case TIOCMBIS: 
+		if (arg & TIOCM_RTS) 
+			self->settings.dte |= IRCOMM_RTS;
+		if (arg & TIOCM_DTR)
+			self->settings.dte |= IRCOMM_DTR;
+		break;
+		
+	case TIOCMBIC:
+		if (arg & TIOCM_RTS)
+			self->settings.dte &= ~IRCOMM_RTS;
+		if (arg & TIOCM_DTR)
+ 			self->settings.dte &= ~IRCOMM_DTR;
+ 		break;
+		
+	case TIOCMSET:
+ 		self->settings.dte = 
+			((self->settings.dte & ~(IRCOMM_RTS | IRCOMM_DTR))
+			 | ((arg & TIOCM_RTS) ? IRCOMM_RTS : 0)
+			 | ((arg & TIOCM_DTR) ? IRCOMM_DTR : 0));
+		break;
+		
+	default:
+		return -EINVAL;
+	}
+	
+	if ((self->settings.dte & IRCOMM_RTS) != old_rts)
+		self->settings.dte |= IRCOMM_DELTA_RTS;
+
+	if ((self->settings.dte & IRCOMM_DTR) != old_dtr)
+		self->settings.dte |= IRCOMM_DELTA_DTR;
+
+	ircomm_param_request(self, IRCOMM_DTE, TRUE);
+	
+	return 0;
+}
+
+/*
+ * Function get_serial_info (driver, retinfo)
+ *
+ *    
+ *
+ */
+static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self,
+				      struct serial_struct *retinfo)
+{
+	struct serial_struct info;
+   
+	if (!retinfo)
+		return -EFAULT;
+
+	IRDA_DEBUG(2, __FUNCTION__ "()\n");
+
+	memset(&info, 0, sizeof(info));
+	info.line = self->line;
+	info.flags = self->flags;
+	info.baud_base = self->settings.data_rate;
+	info.close_delay = self->close_delay;
+	info.closing_wait = self->closing_wait;
+
+	/* For compatibility  */
+ 	info.type = PORT_16550A;
+ 	info.port = 0;
+ 	info.irq = 0;
+	info.xmit_fifo_size = 0;
+	info.hub6 = 0;   
+	info.custom_divisor = 0;
+
+	if (copy_to_user(retinfo, &info, sizeof(*retinfo)))
+		return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Function set_serial_info (driver, new_info)
+ *
+ *    
+ *
+ */
+static int ircomm_tty_set_serial_info(struct ircomm_tty_cb *self,
+				      struct serial_struct *new_info)
+{
+#if 0
+	struct serial_struct new_serial;
+	struct ircomm_tty_cb old_state, *state;
+
+	IRDA_DEBUG(0, __FUNCTION__ "()\n");
+
+	if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
+		return -EFAULT;
+
+
+	state = self
+	old_state = *self;
+  
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((new_serial.baud_base != state->settings.data_rate) ||
+		    (new_serial.close_delay != state->close_delay) ||
+		    ((new_serial.flags & ~ASYNC_USR_MASK) !=
+		     (self->flags & ~ASYNC_USR_MASK)))
+			return -EPERM;
+		state->flags = ((state->flags & ~ASYNC_USR_MASK) |
+				 (new_serial.flags & ASYNC_USR_MASK));
+		self->flags = ((self->flags & ~ASYNC_USR_MASK) |
+			       (new_serial.flags & ASYNC_USR_MASK));
+		/* self->custom_divisor = new_serial.custom_divisor; */
+		goto check_and_exit;
+	}
+
+	/*
+	 * OK, past this point, all the error checking has been done.
+	 * At this point, we start making changes.....
+	 */
+
+	if (self->settings.data_rate != new_serial.baud_base) {
+		self->settings.data_rate = new_serial.baud_base;
+		ircomm_param_request(self, IRCOMM_DATA_RATE, TRUE);
+	}
+
+	self->close_delay = new_serial.close_delay * HZ/100;
+	self->closing_wait = new_serial.closing_wait * HZ/100;
+	/* self->custom_divisor = new_serial.custom_divisor; */
+
+	self->flags = ((self->flags & ~ASYNC_FLAGS) |
+		       (new_serial.flags & ASYNC_FLAGS));
+	self->tty->low_latency = (self->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+ check_and_exit:
+
+	if (self->flags & ASYNC_INITIALIZED) {
+		if (((old_state.flags & ASYNC_SPD_MASK) !=
+		     (self->flags & ASYNC_SPD_MASK)) ||
+		    (old_driver.custom_divisor != driver->custom_divisor)) {
+			if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+				driver->tty->alt_speed = 57600;
+			if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+				driver->tty->alt_speed = 115200;
+			if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+				driver->tty->alt_speed = 230400;
+			if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+				driver->tty->alt_speed = 460800;
+			ircomm_tty_change_speed(driver);
+		}
+	}
+#endif
+	return 0;
+}
+
+/*
+ * Function ircomm_tty_ioctl (tty, file, cmd, arg)
+ *
+ *    
+ *
+ */
+int ircomm_tty_ioctl(struct tty_struct *tty, struct file *file, 
+		     unsigned int cmd, unsigned long arg)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+	int ret = 0;
+
+	IRDA_DEBUG(2, __FUNCTION__ "()\n");
+
+	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
+	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+		if (tty->flags & (1 << TTY_IO_ERROR))
+		    return -EIO;
+	}
+
+	switch (cmd) {
+	case TIOCMGET:
+		ret = ircomm_tty_get_modem_info(self, (unsigned int *) arg);
+		break;
+	case TIOCMBIS:
+	case TIOCMBIC:
+	case TIOCMSET:
+		ret = ircomm_tty_set_modem_info(self, cmd, (unsigned int *) arg);
+		break;
+	case TIOCGSERIAL:
+		ret = ircomm_tty_get_serial_info(self, (struct serial_struct *) arg);
+		break;
+	case TIOCSSERIAL:
+		ret = ircomm_tty_set_serial_info(self, (struct serial_struct *) arg);
+		break;
+	case TIOCMIWAIT:
+		IRDA_DEBUG(0, "(), TIOCMIWAIT, not impl!\n");
+		break;
+
+	case TIOCGICOUNT:
+		IRDA_DEBUG(0, __FUNCTION__ "(), TIOCGICOUNT not impl!\n");
+#if 0
+		save_flags(flags); cli();
+		cnow = driver->icount;
+		restore_flags(flags);
+		p_cuser = (struct serial_icounter_struct *) arg;
+		error = put_user(cnow.cts, &p_cuser->cts);
+		if (error) return error;
+		error = put_user(cnow.dsr, &p_cuser->dsr);
+		if (error) return error;
+		error = put_user(cnow.rng, &p_cuser->rng);
+		if (error) return error;
+		error = put_user(cnow.dcd, &p_cuser->dcd);
+		if (error) return error;
+		error = put_user(cnow.rx, &p_cuser->rx);
+		if (error) return error;
+		error = put_user(cnow.tx, &p_cuser->tx);
+		if (error) return error;
+		error = put_user(cnow.frame, &p_cuser->frame);
+		if (error) return error;
+		error = put_user(cnow.overrun, &p_cuser->overrun);
+		if (error) return error;
+		error = put_user(cnow.parity, &p_cuser->parity);
+		if (error) return error;
+		error = put_user(cnow.brk, &p_cuser->brk);
+		if (error) return error;
+		error = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
+		if (error) return error;			
+#endif		
+		return 0;
+	default:
+		ret = -ENOIOCTLCMD;  /* ioctls which we must ignore */
+	}
+	return ret;
+}
+
+
+

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)