patch-2.2.13 linux/drivers/isdn/hisax/bkm_a8.c

• Lines: 126
• Date: Tue Oct 19 17:14:00 1999
• Orig file: v2.2.12/linux/drivers/isdn/hisax/bkm_a8.c
• Orig date: Tue Oct 19 17:10:37 1999

diff -u --recursive --new-file v2.2.12/linux/drivers/isdn/hisax/bkm_a8.c linux/drivers/isdn/hisax/bkm_a8.c
@@ -1,4 +1,4 @@
-/* $Id: bkm_a8.c,v 1.6 1999/08/11 21:01:24 keil Exp $
+/* $Id: bkm_a8.c,v 1.8 1999/09/04 06:20:05 keil Exp $
  * bkm_a8.c     low level stuff for Scitel Quadro (4*S0, passive)
  *              derived from the original file sedlbauer.c
  *              derived from the original file niccy.c
@@ -7,6 +7,15 @@
  * Author       Roland Klabunde (R.Klabunde@Berkom.de)
  *
  * $Log: bkm_a8.c,v $
+ * Revision 1.8  1999/09/04 06:20:05  keil
+ * Changes from kernel set_current_state()
+ *
+ * Revision 1.7  1999/08/22 20:26:58  calle
+ * backported changes from kernel 2.3.14:
+ * - several #include "config.h" gone, others come.
+ * - "struct device" changed to "struct net_device" in 2.3.14, added a
+ *   define in isdn_compat.h for older kernel versions.
+ *
  * Revision 1.6  1999/08/11 21:01:24  keil
  * new PCI codefix
  *
@@ -27,6 +36,7 @@
  */
 #define __NO_VERSION__
 
+#include <linux/config.h>
 #include "hisax.h"
 #include "isac.h"
 #include "ipac.h"
@@ -34,15 +44,12 @@
 #include "isdnl1.h"
 #include "bkm_ax.h"
 #include <linux/pci.h>
-#ifndef COMPAT_HAS_NEW_PCI
-#include <linux/bios32.h>
-#endif
 
 #define	ATTEMPT_PCI_REMAPPING	/* Required for PLX rev 1 */
 
 extern const char *CardType[];
 
-const char sct_quadro_revision[] = "$Revision: 1.6 $";
+const char sct_quadro_revision[] = "$Revision: 1.8 $";
 
 /* To survive the startup phase */
 typedef struct {
@@ -334,11 +341,7 @@
 	return (0);
 }
 
-#ifdef COMPAT_HAS_NEW_PCI
 static struct pci_dev *dev_a8 __initdata = NULL;
-#else
-static int pci_index __initdata = 0;
-#endif
 
 __initfunc(int
 	   setup_sct_quadro(struct IsdnCard *card))
@@ -365,7 +368,6 @@
 		printk(KERN_WARNING "HiSax: %s: Invalid subcontroller in configuration, default to 1\n",
 		       CardType[card->typ]);
 #if CONFIG_PCI
-#ifdef COMPAT_HAS_NEW_PCI
 	if (!pci_present()) {
 		printk(KERN_ERR "bkm_a4t: no PCI bus present\n");
 		return (0);
@@ -377,46 +379,18 @@
 			&sub_sys_id);
 		if (sub_sys_id == ((SCT_SUBSYS_ID << 16) | SCT_SUBVEN_ID)) {
 			found = 1;
-			pci_ioaddr1 = get_pcibase(dev_a8, 1);
+			pci_ioaddr1 = dev_a8->base_address[ 1];
 			pci_irq = dev_a8->irq;
 			pci_bus = dev_a8->bus->number;
 			pci_device_fn = dev_a8->devfn;
 		}
 	}
-#else
-	for (; pci_index < 0xff; pci_index++) {
-		if (pcibios_find_device(
-				PLX_VENDOR_ID,
-				PLX_DEVICE_ID,
-				pci_index,
-				&pci_bus,
-				&pci_device_fn) == PCIBIOS_SUCCESSFUL) {
-			
-			u_int sub_sys_id = 0;
-
-			pcibios_read_config_dword(pci_bus, pci_device_fn,
-				PCI_SUBSYSTEM_VENDOR_ID, &sub_sys_id);
-			if (sub_sys_id == ((SCT_SUBSYS_ID << 16) | SCT_SUBVEN_ID)) {
-				found = 1;
-				pcibios_read_config_byte(pci_bus, pci_device_fn,
-					PCI_INTERRUPT_LINE, &pci_irq);
-				pcibios_read_config_dword(pci_bus, pci_device_fn,
-					PCI_BASE_ADDRESS_1, &pci_ioaddr1);
-				cs->irq = pci_irq;
-				break;
-			}
-		}
-	}
-#endif /* COMPAT_HAS_NEW_PCI */
 	if (!found) {
 		printk(KERN_WARNING "HiSax: %s (%s): Card not found\n",
 		       CardType[card->typ],
 		       sct_quadro_subtypes[cs->subtyp]);
 		return (0);
 	}
-#ifndef COMPAT_HAS_NEW_PCI
-	pci_index++; /* need for more as one card */
-#endif
 	if (!pci_irq) {		/* IRQ range check ?? */
 		printk(KERN_WARNING "HiSax: %s (%s): No IRQ\n",
 		       CardType[card->typ],
@@ -438,9 +412,7 @@
 		pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
 		pcibios_write_config_dword(pci_bus, pci_device_fn,
 			PCI_BASE_ADDRESS_1, pci_ioaddr1);
-#ifdef COMPAT_HAS_NEW_PCI
-		get_pcibase(dev_a8, 1) = pci_ioaddr1;
-#endif /* COMPAT_HAS_NEW_PCI */
+		dev_a8->base_address[ 1] = pci_ioaddr1;
 	}
 /* End HACK */
 #endif