patch-2.2.12 linux/Documentation/mtrr.txt

Next file: linux/Documentation/networking/00-INDEX
Previous file: linux/Documentation/modules.txt
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.2.11/linux/Documentation/mtrr.txt linux/Documentation/mtrr.txt
@@ -40,7 +40,7 @@
 reg01: base=0x08000000 ( 128MB), size=  64MB: write-back, count=1
 reg02: base=0xf8000000 (3968MB), size=   4MB: write-combining, count=1
-This is for videoram at base address 0xf8000000 and size 4 MBytes. To
+This is for video RAM at base address 0xf8000000 and size 4 megabytes. To
 find out your base address, you need to look at the output of your X
 server, which tells you where the linear framebuffer address is. A
 typical line that you may get is:
@@ -56,7 +56,7 @@
 (--) S3: videoram:  4096k
-That's 4 MBytes, which is 0x400000 bytes (in hexadecimal).
+That's 4 megabytes, which is 0x400000 bytes (in hexadecimal).
 A patch is being written for XFree86 which will make this automatic:
 in other words the X server will manipulate /proc/mtrr using the
 ioctl() interface, so users won't have to do anything. If you use a

TCL-scripts by Sam Shen (who was at: