patch-2.2.11 linux/arch/mips/kernel/setup.c

Next file: linux/arch/mips/kernel/signal.c
Previous file: linux/arch/mips/kernel/scall_o32.S
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.2.10/linux/arch/mips/kernel/setup.c linux/arch/mips/kernel/setup.c
@@ -1,4 +1,4 @@
-/* $Id: setup.c,v 1.12 1998/08/18 20:45:06 ralf Exp $
+/* $Id: setup.c,v 1.15.2.2 1999/06/17 12:06:39 ralf Exp $
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -29,7 +29,6 @@
 #include <linux/blk.h>
 #endif
 #ifdef CONFIG_RTC
-#include <linux/ioport.h>
 #include <linux/timex.h>
 #endif
 
@@ -76,7 +75,6 @@
  * information is being use to continue the screen output just below
  * the BIOS printed text and with the same text resolution.
  */
-struct drive_info_struct drive_info = DEFAULT_DRIVE_INFO;
 struct screen_info screen_info = DEFAULT_SCREEN_INFO;
 
 #ifdef CONFIG_BLK_DEV_FD
@@ -92,39 +90,25 @@
 extern struct rtc_ops no_rtc_ops;
 struct rtc_ops *rtc_ops;
 
+extern struct kbd_ops no_kbd_ops;
+struct kbd_ops *kbd_ops;
+
 /*
  * Setup information
  *
- * These are intialized so they are in the .data section
+ * These are initialized so they are in the .data section
  */
 unsigned long mips_memory_upper = KSEG0; /* this is set by kernel_entry() */
 unsigned long mips_cputype = CPU_UNKNOWN;
 unsigned long mips_machtype = MACH_UNKNOWN;
 unsigned long mips_machgroup = MACH_GROUP_UNKNOWN;
-unsigned long mips_tlb_entries = 48; /* Guess which CPU I've got :) */
-unsigned long mips_vram_base = KSEG0;
 
 unsigned char aux_device_present;
-extern int root_mountflags;
 extern int _end;
 
-extern char empty_zero_page[PAGE_SIZE];
-
-/*
- * This is set up by the setup-routine at boot-time
- */
-#define PARAM	empty_zero_page
-#if 0
-#define ORIG_ROOT_DEV (*(unsigned short *) (PARAM+0x1FC))
-#define AUX_DEVICE_INFO (*(unsigned char *) (PARAM+0x1FF))
-#endif
-#define LOADER_TYPE (*(unsigned char *) (PARAM+0x210))
-#define KERNEL_START (*(unsigned long *) (PARAM+0x214))
-#define INITRD_START (*(unsigned long *) (PARAM+0x218))
-#define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c))
-
 static char command_line[CL_SIZE] = { 0, };
        char saved_command_line[CL_SIZE];
+extern char arcs_cmdline[CL_SIZE];
 
 /*
  * The board specific setup routine sets irq_setup to point to a board
@@ -153,7 +137,11 @@
            unsigned long * memory_start_p, unsigned long * memory_end_p))
 {
 	unsigned long memory_end;
-	tag* atag;
+#ifdef CONFIG_BLK_DEV_INITRD
+	unsigned long tmp;
+	unsigned long *initrd_header;
+#endif
+	void baget_setup(void);
 	void cobalt_setup(void);
 	void decstation_setup(void);
 	void deskstation_setup(void);
@@ -161,18 +149,6 @@
 	void sni_rm200_pci_setup(void);
 	void sgi_setup(void);
 
-	/* Perhaps a lot of tags are not getting 'snarfed' - */
-	/* please help yourself */
-
-	atag = bi_TagFind(tag_machtype);
-	memcpy(&mips_machtype, TAGVALPTR(atag), atag->size);
-
-	atag = bi_TagFind(tag_machgroup);
-	memcpy(&mips_machgroup, TAGVALPTR(atag), atag->size);
-
-	atag = bi_TagFind(tag_vram_base);
-	memcpy(&mips_vram_base, TAGVALPTR(atag), atag->size);
-
 	/* Save defaults for configuration-dependent routines.  */
 	irq_setup = default_irq_setup;
 
@@ -185,14 +161,25 @@
 #endif
 
 	rtc_ops = &no_rtc_ops;
+	kbd_ops = &no_kbd_ops;
 
 	switch(mips_machgroup)
 	{
+#ifdef CONFIG_BAGET_MIPS
+	case MACH_GROUP_UNKNOWN: 
+		baget_setup();
+		break;
+#endif
 #ifdef CONFIG_COBALT_MICRO_SERVER
 	case MACH_GROUP_COBALT:
 		cobalt_setup();
 		break;
 #endif
+#ifdef CONFIG_DECSTATION
+	case MACH_GROUP_DEC:
+		decstation_setup();
+		break;
+#endif
 #ifdef CONFIG_MIPS_JAZZ
 	case MACH_GROUP_JAZZ:
 		jazz_setup();
@@ -212,9 +199,6 @@
 		panic("Unsupported architecture");
 	}
 
-	atag = bi_TagFind(tag_drive_info);
-	memcpy(&drive_info, TAGVALPTR(atag), atag->size);
-
 	memory_end = mips_memory_upper;
 	/*
 	 * Due to prefetching and similar mechanism the CPU sometimes
@@ -225,20 +209,7 @@
 	memory_end -= 128;
 	memory_end &= PAGE_MASK;
 
-#ifdef CONFIG_BLK_DEV_RAM
-	rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
-	rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
-	rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
-#endif
-
-	atag = bi_TagFind(tag_mount_root_rdonly);
-	if (atag)
-	  root_mountflags |= MS_RDONLY;
-
-	atag = bi_TagFind(tag_command_line);
-	if (atag)
-		memcpy(&command_line, TAGVALPTR(atag), atag->size);	  
-
+        strncpy (command_line, arcs_cmdline, CL_SIZE);
 	memcpy(saved_command_line, command_line, CL_SIZE);
 	saved_command_line[CL_SIZE-1] = '\0';
 
@@ -247,15 +218,21 @@
 	*memory_end_p = memory_end;
 
 #ifdef CONFIG_BLK_DEV_INITRD
-	if (LOADER_TYPE) {
-		initrd_start = INITRD_START;
-		initrd_end = INITRD_START+INITRD_SIZE;
+	tmp = (((unsigned long)&_end + PAGE_SIZE-1) & PAGE_MASK) - 8;
+	if (tmp < (unsigned long)&_end)
+		tmp += PAGE_SIZE;
+	initrd_header = (unsigned long *)tmp;
+	if (initrd_header[0] == 0x494E5244) {
+		initrd_start = (unsigned long)&initrd_header[2];
+		initrd_end = initrd_start + initrd_header[1];
+		initrd_below_start_ok = 1;
 		if (initrd_end > memory_end) {
 			printk("initrd extends beyond end of memory "
 			       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
 			       initrd_end,memory_end);
-		initrd_start = 0;
-		}
+			initrd_start = 0;
+		} else
+			*memory_start_p = initrd_end;
 	}
 #endif
 }

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)