-----BEGIN PGP SIGNED MESSAGE-----


Assumptions:
- - ------------
1) Installshield 3 should be installed in c:\is3.
2) MS Visual c++ 5.0 installed properly.
3) Source files for pgp are in c:\pgp55.


Building
- - --------
  * In Visual C++ 5.0, open the workspace clients/pgp/win32/pgp55.dsw.
  * Using the "Build/Set Active Configuration..." menu item, select
    the "PGP55 - Win32 Release" configuration.
  * Start the build (F7).
  * Once the build is done, do a clean, this should remove all 
    intermediary files and objects that are no longer needed.
  * Exit Visual C++.

About keygen.avi & PGP55win.pdf
- -------------------------------
To save on space, I have omitted the above files.  Although two 
zero byte files by the same name exist in this directory:
c:\pgp55\clients\pgp\win32\pgp55\Installer\Extras
So, if you have these two files copy them to the directory above.
You only need to do this once, of course.

Your Public Key
- - ---------------
In pgp export your public key in .asc format and place it there:-
c:\pgp55\clients\pgp\win32\pgp55\Installer\Extras
Note you only need to do this once.

Edit copyrel.bat
- - ----------------
Goto this dir:-
c:\pgp55\clients\pgp\win32\pgp55\release
In the release directory, there is a batch file called copyrel.bat.
Edit this file, look for this line:-
set URSIG="Imad R. Faiad.asc"
change "Imad R. Faiad.asc" to the name of your exported public key.
Save your changes. Note you only need to do the editing once.

Sign the Binaries of the Build & run copyrel.bat
- - ------------------------------------------------
Goto this dir, which contains all the binaries for the build:-
c:\pgp55\clients\pgp\win32\pgp55\release

Select all the dll's and exe's, and sign them (detached signature, text
output) with the key you just exported to the Extra directory.

Run copyrel.bat, this should copy the release binaries, and prepare for 
building the pgp installer.

Note this should be performed after each and every build of pgp.

Build the pgp Installer:
- - ------------------------
Goto this directory:-
c:\pgp55\clients\pgp\win32\pgp55\Installer\
In the above directory there is a file called Build.bat
Run it, at the conclusion of which a file by the name of PGPInst.exe
will be created in the Installer directory.  This is the pgp installer.

This is it, you are done.
Before you attempt this build make sure you have enough environment space.
Add this line to your config.sys file:
shell=c:\command.com /e:16384 /p

Best Regards
and Good Luck

Imad R. Faiad

-----BEGIN PGP SIGNATURE-----
Version: PGP for Personal Privacy 5.5.3

iQCVAwUBNUDhjXyxk99nTXwHAQEl7QP+JV35ZG8//3pKkPpJnxxdb/dWg+enhPCu
3qCjdAhnXIQdRnooGmlF5EK9X7Rw+o/PV1w1xu1SyWAZRBlD1LUVDf9V5o9uIxfO
25vGVvS89vBEmBaR2FvmWDZTGEEczo70/V6dp0osScz7vSrvUwyFcY1ASPght9IL
sEZEmKkALR0=
=cMDQ
-----END PGP SIGNATURE-----
