This file documents known bugs in Octave and describes where and how to
report any bugs that you may find.  Copyright (C) 1992 John W. Eaton.
You may copy, distribute, and modify it freely as long as you preserve
this copyright notice and permission notice.

Known Causes of Trouble with Octave
***********************************

   This section describes known problems that affect users of Octave.
Most of these are not Octave bugs per se--if they were, we would fix
them.  But the result for a user may be like the result of a bug.

   Some of these problems are due to bugs in other software, some are
missing features that are too much work to add, and some are places
where people's opinions differ as to what is best.

Actual Bugs We Haven't Fixed Yet
================================

   * Recursive functions don't work properly because the local
     variables are not properly saved.  This will require some work to
     fix, but should work correctly by the time version 1.0 is released.

   * Inside the square brackets used to define matrices, Octave will not
     parse expressions correctly if they contain spaces.  It is
     possible to work around this bug by omitting the spaces.  For
     example:

          octave:13> a = [ 1 + 3, linspace (2, 6) ]

     produces a syntax error, but

          octave:13> a = [ 1+3, linspace(2,6,3) ]

     produces the correct result:

          a = 4 2 4 6

Installation Problems
=====================

   This is a list of problems (and some apparent problems which don't
really mean anything is wrong) that may show up during installation of
Octave.

   * Problems with finite and isinf on systems that don't have `isinf()'
     but do have `finite()'.

     The copy of `math.h' supplied with `libg++-2.3' (and possibly
     other versions as well) declares `finite()' as
          double finite (double);
     even though some (many? all?) systems declare it as
          int finite (double);

     If the copy of `math.h' from `libg++' was installed, you should
     edit it to correct this mistake.

   * Problems compiling octave.cc on RS/6000 (and possibly other)
     systems:

     If octave.cc fails to compile due to parse errors in system include
     files and undeclared subroutines like `gethostname' and `endpwent',
     it is probably because not all of the libg++ include files have
     been installed.  This appears to be a problem with libg++-2.3.
     Here's a fix:

     Apply the following patch to libg++/config/rs6000.mh and re-run
     make install for libg++.

          *** rs6000.mh~  Mon Aug 17 19:18:44 1992
          --- rs6000.mh   Mon Dec 28 23:54:57 1992
          ***************
          *** 3,6 ****
            # /usr/include/unistd.h has write(int, char*, unsigned) instead
            # of write(int, const void*, size_t).  This causes problems due
            # to g++ new pedantic dis-allowal of void* -> char* conversions.
          ! G_CONFIG_ARGS = "HAVE_UNISTD=0 /*broken*/"
          \ No newline at end of file
          --- 3,11 ----
            # /usr/include/unistd.h has write(int, char*, unsigned) instead
            # of write(int, const void*, size_t).  This causes problems due
            # to g++ new pedantic dis-allowal of void* -> char* conversions.
          ! G_CONFIG_ARGS = "HAVE_UNISTD=0 /*broken*/"
          !
          ! # If the C include files are C++-ready (with extern "C"),
          ! # define: HAVE_CPLUS_EXTERN = 1 and: WRAP_C_INCLUDES =
          ! # If not, define HAVE_CPLUS_EXTERN = 0, and do not define WRAP_C_INCLUDES here
          .
          ! HAVE_CPLUS_EXTERN = 0

   * Lots of warnings about `control reaches end of non-void function'
     when compiling with -O.

     This appears to be a problem with g++ and the definition of an
     empty destructor in Complex.h from libg++.  Deleting the
     declaration and definition of the (unecessary) destructor from
     Complex.h eliminates the warnings.  Here's a patch:

          *** Complex.h~  Mon Dec 28 23:58:29 1992
          --- Complex.h   Tue Dec 29 00:08:41 1992
          ***************
          *** 46,53 ****
                               Complex(const Complex& y);
                               Complex(double r, double i=0);
          
          -                   ~Complex();
          -
              Complex&         operator =  (const Complex& y);
          
              Complex&         operator += (const Complex& y);
          --- 46,51 ----
          ***************
          *** 123,130 ****
            inline Complex::Complex() {}
            inline Complex::Complex(const Complex& y) :re(y.real()), im(y.imag()) {}
            inline Complex::Complex(double r, double i) :re(r), im(i) {}
          -
          - inline Complex::~Complex() {}
          
            inline Complex&  Complex::operator =  (const Complex& y)
            {
          --- 121,126 ----

   * If you don't have NPSOL but you still want to be able to solve
     NLPs, you'll need to find a replacement or order NPSOL from
     Stanford.

     You can get more information about NPSOL from

          Stanford University
          Office of Technology Licensing
          857 Serra Street
          Stanford CA 94305-6225
          Tel: (415) 723-0651
          Fax: (415) 725-7295

     Octave may soon contain support for FSQP, an NLP solver from Andre
     Tits (andre@src.umd.edu) of the University of Maryland.  FSQP is
     available free of charge to academic sites, but can not be
     redistributed to third parties.

Disappointments and Misunderstandings
=====================================

   These problems are perhaps regrettable, but we don't know any
practical way around them.

   *  Certain Changes We Don't Want to Make
=====================================

   This section lists changes that people frequently request, but which
we do not make because we think Octave is better without them.

Reporting Bugs
**************

   Your bug reports play an essential role in making Octave reliable.

   When you encounter a problem, the first thing to do is to see if it
is already known.  *Note Trouble::.  If it isn't known, then you should
report the problem.

   Reporting a bug may help you by bringing a solution to your problem,
or it may not.  (If it does not, look in the service directory; see
*Note Service::.)  In any case, the principal function of a bug report
is to help the entire community by making the next version of Octave
work better.  Bug reports are your contribution to the maintenance of
Octave.

   In order for a bug report to serve its purpose, you must include the
information that makes for fixing the bug.

Have You Found a Bug?
=====================

   If you are not sure whether you have found a bug, here are some
guidelines:

   * If the compiler gets a fatal signal, for any input whatever, that
     is a compiler bug.  Reliable compilers never crash.

   * If the compiler produces invalid assembly code, for any input
     whatever (except an `asm' statement), that is a compiler bug,
     unless the compiler reports errors (not just warnings) which would
     ordinarily prevent the assembler from being run.

   * If the compiler produces valid assembly code that does not
     correctly execute the input source code, that is a compiler bug.

     However, you must double-check to make sure, because you may have
     run into an incompatibility between GNU C and traditional C.  These
     incompatibilities might be considered bugs, but they are
     inescapable consequences of valuable features.

     Or you may have a program whose behavior is undefined, which
     happened by chance to give the desired results with another C or
     C++ compiler.

     For example, in many nonoptimizing compilers, you can write `x;'
     at the end of a function instead of `return x;', with the same
     results.  But the value of the function is undefined if `return'
     is omitted; it is not a bug when GNU CC produces different results.

     Problems often result from expressions with two increment
     operators, as in `f (*p++, *p++)'.  Your previous compiler might
     have interpreted that expression the way you intended; GNU CC might
     interpret it another way.  Neither compiler is wrong.  The bug is
     in your code.

     After you have localized the error to a single source line, it
     should be easy to check for these things.  If your program is
     correct and well defined, you have found a compiler bug.

   * If the compiler produces an error message for valid input, that is
     a compiler bug.

   * If the compiler does not produce an error message for invalid
     input, that is a compiler bug.  However, you should note that your
     idea of "invalid input" might be my idea of "an extension" or
     "support for traditional practice".

   * If you are an experienced user of programs like Octave, your
     suggestions for improvement are welcome in any case.

Where to Report Bugs
====================

   Send bug reports for Octave to:

     bug-octave@che.utexas.edu

   *Do not send bug reports to `help-octave'*.  Most users of Octave do
not want to receive bug reports.  Those that do, have asked to be on
`bug-octave'.

   As a last resort, send bug reports on paper to:

     Octave Bugs c/o John W. Eaton
     Department of Chemical Engineering
     The University of Texas at Austin
     Austin, Texas 78712

How to Report Bugs
==================

   The fundamental principle of reporting bugs usefully is this:
*report all the facts*.  If you are not sure whether to state a fact or
leave it out, state it!

   Often people omit facts because they think they know what causes the
problem and they conclude that some details don't matter.  Thus, you
might assume that the name of the variable you use in an example does
not matter.  Well, probably it doesn't, but one cannot be sure.
Perhaps the bug is a stray memory reference which happens to fetch from
the location where that name is stored in memory; perhaps, if the name
were different, the contents of that location would fool the compiler
into doing the right thing despite the bug.  Play it safe and give a
specific, complete example.  That is the easiest thing for you to do,
and the most helpful.

   Keep in mind that the purpose of a bug report is to enable someone to
fix the bug if it is not known.  It isn't very important what happens if
the bug is already known.  Therefore, always write your bug reports on
the assumption that the bug is not known.

   Sometimes people give a few sketchy facts and ask, "Does this ring a
bell?"  This cannot help us fix a bug, so it is basically useless.  We
respond by asking for enough details to enable us to investigate.  You
might as well expedite matters by sending them to begin with.

   Try to make your bug report self-contained.  If we have to ask you
for more information, it is best if you include all the previous
information in your response, as well as the information that was
missing.

   To enable someone to investigate the bug, you should include all
these things:

   * The version of Octave.  You can get this by running it with the
     `-v' option.

     Without this, we won't know whether there is any point in looking
     for the bug in the current version of Octave.

   * A complete input file that will reproduce the bug.

     A single statement may not be enough of an example--the bug might
     depend on other details that are missing from the single statement
     where the error finally occurs.

     Without a real example one can execute, all anyone can do about
     your bug report is wish you luck.  It would be futile to try to
     guess how to provoke the bug.

   * The command arguments you gave Octave to execute that example and
     observe the bug.  To guarantee you won't omit something important,
     list all the options.

     If we were to try to guess the arguments, we would probably guess
     wrong and then we would not encounter the bug.

   * The type of machine you are using, and the operating system name
     and version number.

   * The operands you gave to the `configure' command when you installed
     the interpreter.

   * A complete list of any modifications you have made to the
     interpreter source.  (We don't promise to investigate the bug
     unless it happens in an unmodified compiler.  But if you've made
     modifications and don't tell us, then you are sending us on a wild
     goose chase.)

     Be precise about these changes--show a context diff for them.

     Adding files of your own (such as a machine description for a
     machine we don't support) is a modification of the compiler source.

   * Details of any other deviations from the standard procedure for
     installing Octave.

   * A description of what behavior you observe that you believe is
     incorrect.  For example, "The interpreter gets a fatal signal,"
     or, "The output produced at line 208 is incorrect."

     Of course, if the bug is that the interpreter gets a fatal signal,
     then one can't miss it.  But if the bug is incorrect output, the
     maintainer might not notice unless it is glaringly wrong.  None of
     us has time to study all the code from a 50-line program just on
     the chance that one instruction might be wrong.  We need `you' to
     do this part!

     Even if the problem you experience is a fatal signal, you should
     still say so explicitly.  Suppose something strange is going on,
     such as, your copy of the compiler is out of synch, or you have
     encountered a bug in the C library on your system.  Your copy
     might crash and the copy here would not.  If you said to expect a
     crash, then when the compiler here fails to crash, we would know
     that the bug was not happening.  If you don't say to expect a
     crash, then we would not know whether the bug was happening.  We
     would not be able to draw any conclusion from our observations.

     Often the observed symptom is incorrect output when your program
     is run.  Sad to say, this is not enough information unless the
     program is short and simple.  None of us has time to study a large
     program to figure out how it would work if compiled correctly,
     much less which line of it was interpreted incorrectly.  So you
     will have to do that.  Tell us which source line it is, and what
     incorrect result happens when that line is executed.  A person who
     understands the program can find this as easily as finding a bug
     in the program itself.

   * If you wish to suggest changes to the Octave source, send them as
     context diffs.  If you even discuss something in the Octave source,
     refer to it by context, not by line number.

     The line numbers in the development sources don't match those in
     your sources.  Your line numbers would convey no useful
     information to the maintainers.

   * Additional information from a debugger might enable someone to
     find a problem on a machine which he does not have available.
     However, you need to think when you collect this information if
     you want it to have any chance of being useful.

   Here are some things that are not necessary:

   * A description of the envelope of the bug.

     Often people who encounter a bug spend a lot of time investigating
     which changes to the input file will make the bug go away and
     which changes will not affect it.

     This is often time consuming and not very useful, because the way
     we will find the bug is by running a single example under the
     debugger with breakpoints, not by pure deduction from a series of
     examples.  You might as well save your time for something else.

     Of course, if you can find a simpler example to report *instead*
     of the original one, that is a convenience.  Errors in the output
     will be easier to spot, running under the debugger will take less
     time, etc.  Most Octave bugs involve just one function, so the
     most straightforward way to simplify an example is to delete all
     the function definitions except the one where the bug occurs.
     Those earlier in the file may be replaced by external declarations
     if the crucial function depends on them.

     However, simplification is not vital; if you don't want to do
     this, report the bug anyway and send the entire test case you used.

   * A patch for the bug.

     A patch for the bug is useful if it is a good one.  But don't omit
     the necessary information, such as the test case, on the
     assumption that a patch is all we need.  We might see problems
     with your patch and decide to fix the problem another way, or we
     might not understand it at all.

     Sometimes with a program as complicated as Octave it is very hard
     to construct an example that will make the program follow a
     certain path through the code.  If you don't send the example, we
     won't be able to construct one, so we won't be able to verify that
     the bug is fixed.

     And if we can't understand what bug you are trying to fix, or why
     your patch should be an improvement, we won't install it.  A test
     case will help us to understand.

   * A guess about what the bug is or what it depends on.

     Such guesses are usually wrong.  Even I can't guess right about
     such things without first using the debugger to find the facts.

Sending Patches for Octave
==========================

   If you would like to write bug fixes or improvements for Octave,
that is very helpful.  When you send your changes, please follow these
guidelines to avoid causing extra work for us in studying the patches.

   If you don't follow these guidelines, your information might still be
useful, but using it will take extra work.  Maintaining Octave is a lot
of work in the best of circumstances, and we can't keep up unless you do
your best to help.

   * Send an explanation with your changes of what problem they fix or
     what improvement they bring about.  For a bug fix, just include a
     copy of the bug report, and explain why the change fixes the bug.

     (Referring to a bug report is not as good as including it, because
     then we will have to look it up, and we have probably already
     deleted it if we've already fixed the bug.)

   * Always include a proper bug report for the problem you think you
     have fixed.  We need to convince ourselves that the change is
     right before installing it.  Even if it is right, we might have
     trouble judging it if we don't have a way to reproduce the problem.

   * Include all the comments that are appropriate to help people
     reading the source in the future understand why this change was
     needed.

   * Don't mix together changes made for different reasons.  Send them
     *individually*.

     If you make two changes for separate reasons, then we might not
     want to install them both.  We might want to install just one.  If
     you send them all jumbled together in a single set of diffs, we
     have to do extra work to disentangle them--to figure out which
     parts of the change serve which purpose.  If we don't have time
     for this, we might have to ignore your changes entirely.

     If you send each change as soon as you have written it, with its
     own explanation, then the two changes never get tangled up, and we
     can consider each one properly without any extra work to
     disentangle them.

     Ideally, each change you send should be impossible to subdivide
     into parts that we might want to consider separately, because each
     of its parts gets its motivation from the other parts.

   * Send each change as soon as that change is finished.  Sometimes
     people think they are helping us by accumulating many changes to
     send them all together.  As explained above, this is absolutely
     the worst thing you could do.

     Since you should send each change separately, you might as well
     send it right away.  That gives us the option of installing it
     immediately if it is important.

   * Use `diff -c' to make your diffs.  Diffs without context are hard
     for us to install reliably.  More than that, they make it hard for
     us to study the diffs to decide whether we want to install them.
     Unidiff format is better than contextless diffs, but not as easy
     to read as `-c' format.

     If you have GNU diff, use `diff -cp', which shows the name of the
     function that each change occurs in.

   * Write the change log entries for your changes.  We get lots of
     changes, and we don't have time to do all the change log writing
     ourselves.

     Read the `ChangeLog' file to see what sorts of information to put
     in, and to learn the style that we use.  The purpose of the change
     log is to show people where to find what was changed.  So you need
     to be specific about what functions you changed; in large
     functions, it's often helpful to indicate where within the
     function the change was.

     On the other hand, once you have shown people where to find the
     change, you need not explain its purpose. Thus, if you add a new
     function, all you need to say about it is that it is new.  If you
     feel that the purpose needs explaining, it probably does--but the
     explanation will be much more useful if you put it in comments in
     the code.

     If you would like your name to appear in the header line for who
     made the change, send us the header line.

   * When you write the fix, keep in mind that I can't install a change
     that would break other systems.

     People often suggest fixing a problem by changing
     machine-independent files such as `toplev.c' to do something
     special that a particular system needs.  Sometimes it is totally
     obvious that such changes would break Octave for almost all users.
     We can't possibly make a change like that.  At best it might tell
     us how to write another patch that would solve the problem
     acceptably.

     Sometimes people send fixes that *might* be an improvement in
     general--but it is hard to be sure of this.  It's hard to install
     such changes because we have to study them very carefully.  Of
     course, a good explanation of the reasoning by which you concluded
     the change was correct can help convince us.

     The safest changes are changes to the configuration files for a
     particular machine.  These are safe because they can't create new
     bugs on other machines.

     Please help us keep up with the workload by designing the patch in
     a form that is good to install.

How To Get Help with Octave
***************************

   If you need help installing, using or changing Octave, the mailing
list

     help-octave@che.utexas.edu

   exists for the discussion of Octave matters related to using,
installing, and porting Octave.  If you would like to join the
discussion, please send a short note to

     help-octave-request@che.utexas.edu
                 ^^^^^^^

   *Please do not* send requests to be added or removed from the the
mailing list, or other administrative trivia to the list itself.

