commit bbfc30f29cb328111fec12975ded8223ecc8e1a5 Author: Greg Kroah-Hartman Date: Fri Dec 21 14:11:40 2018 +0100 Linux 4.9.147 commit 1228a3336d90e2e3572ebaf1d959e3f51a10ea46 Author: Trent Piepho Date: Wed May 16 16:45:51 2018 -0700 rtc: snvs: Add timeouts to avoid kernel lockups [ Upstream commit cd7f3a249dbed2858e6c2f30e5be7f1f7a709ee2 ] In order to read correctly from asynchronously updated RTC registers, it's necessary to read repeatedly until their values do not change from read to read. It's also necessary to wait for three RTC clock ticks for certain operations. There are no timeouts in this code and these operations could possibly loop forever. To avoid kernel hangs, put in timeouts. The iMX7d can be configured to stop the SRTC on a tamper event, which will lockup the kernel inside this driver as described above. These hangs can happen when running under qemu, which doesn't emulate the SNVS RTC, though currently the driver will refuse to load on qemu due to a timeout in the driver probe method. It could also happen if the SRTC block where somehow placed into reset or the slow speed clock that drives the SRTC counter (but not the CPU) were to stop. The symptoms on a two core iMX7d are a work queue hang on rtc_timer_do_work(), which eventually blocks a systemd fsnotify operation that triggers a work queue flush, causing systemd to hang and thus causing all services that should be started by systemd, like a console getty, to fail to start or stop. Also optimize the wait code to wait less. It only needs to wait for the clock to advance three ticks, not to see it change three times. Cc: Alexandre Belloni Cc: Alessandro Zummo Cc: Fabio Estevam Cc: Shawn Guo Cc: Bryan O'Donoghue Signed-off-by: Trent Piepho Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin commit 54dbda74475e4e6fa8fd353c2cc599bda51fc5cc Author: Guy Shapiro Date: Sun Jan 29 11:57:19 2017 +0200 rtc: snvs: add a missing write sync [ Upstream commit 7bb633b1a9812a6b9f3e49d0cf17f60a633914e5 ] The clear of the LPTA_EN flag should be synced before writing to the alarm register. Omitting this synchronization creates a race when trying to change existing alarm. Signed-off-by: Guy Shapiro Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin commit 36764b4a4363ef6dc5a6335acd3157c9dc94ebe4 Author: Israel Rukshin Date: Wed Dec 5 16:54:57 2018 +0000 nvmet-rdma: fix response use after free [ Upstream commit d7dcdf9d4e15189ecfda24cc87339a3425448d5c ] nvmet_rdma_release_rsp() may free the response before using it at error flow. Fixes: 8407879 ("nvmet-rdma: fix possible bogus dereference under heavy load") Signed-off-by: Israel Rukshin Reviewed-by: Sagi Grimberg Reviewed-by: Max Gurtovoy Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin commit 89efcfc544ee1d9d4e68ec44d3932db3f3feb3b8 Author: Hans de Goede Date: Wed Nov 21 10:19:55 2018 +0100 i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node [ Upstream commit 0544ee4b1ad574aec3b6379af5f5cdee42840971 ] Some AMD based HP laptops have a SMB0001 ACPI device node which does not define any methods. This leads to the following error in dmesg: [ 5.222731] cmi: probe of SMB0001:00 failed with error -5 This commit makes acpi_smbus_cmi_add() return -ENODEV instead in this case silencing the error. In case of a failure of the i2c_add_adapter() call this commit now propagates the error from that call instead of -EIO. Signed-off-by: Hans de Goede Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit ebf838c7a160484e99b9e43203359815cde45809 Author: Adamski, Krzysztof (Nokia - PL/Wroclaw) Date: Fri Nov 16 13:24:41 2018 +0000 i2c: axxia: properly handle master timeout [ Upstream commit 6c7f25cae54b840302e4f1b371dbf318fbf09ab2 ] According to Intel (R) Axxia TM Lionfish Communication Processor Peripheral Subsystem Hardware Reference Manual, the AXXIA I2C module have a programmable Master Wait Timer, which among others, checks the time between commands send in manual mode. When a timeout (25ms) passes, TSS bit is set in Master Interrupt Status register and a Stop command is issued by the hardware. The axxia_i2c_xfer(), does not properly handle this situation, however. For each message a separate axxia_i2c_xfer_msg() is called and this function incorrectly assumes that any interrupt might happen only when waiting for completion. This is mostly correct but there is one exception - a master timeout can trigger if enough time has passed between individual transfers. It will, by definition, happen between transfers when the interrupts are disabled by the code. If that happens, the hardware issues Stop command. The interrupt indicating timeout will not be triggered as soon as we enable them since the Master Interrupt Status is cleared when master mode is entered again (which happens before enabling irqs) meaning this error is lost and the transfer is continued even though the Stop was issued on the bus. The subsequent operations completes without error but a bogus value (0xFF in case of read) is read as the client device is confused because aborted transfer. No error is returned from master_xfer() making caller believe that a valid value was read. To fix the problem, the TSS bit (indicating timeout) in Master Interrupt Status register is checked before each transfer. If it is set, there was a timeout before this transfer and (as described above) the hardware already issued Stop command so the transaction should be aborted thus -ETIMEOUT is returned from the master_xfer() callback. In order to be sure no timeout was issued we can't just read the status just before starting new transaction as there will always be a small window of time (few CPU cycles at best) where this might still happen. For this reason we have to temporally disable the timer before checking for TSS bit. Disabling it will, however, clear the TSS bit so in order to preserve that information, we have to read it in ISR so we have to ensure that the TSS interrupt is not masked between transfers of one transaction. There is no need to call bus recovery or controller reinitialization if that happens so it's skipped. Signed-off-by: Krzysztof Adamski Reviewed-by: Alexander Sverdlin Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 06ec6679fe12cacafce68ab7b509586482a2ae1b Author: Stefan Hajnoczi Date: Thu Dec 6 19:14:34 2018 +0000 vhost/vsock: fix reset orphans race with close timeout [ Upstream commit c38f57da428b033f2721b611d84b1f40bde674a8 ] If a local process has closed a connected socket and hasn't received a RST packet yet, then the socket remains in the table until a timeout expires. When a vhost_vsock instance is released with the timeout still pending, the socket is never freed because vhost_vsock has already set the SOCK_DONE flag. Check if the close timer is pending and let it close the socket. This prevents the race which can leak sockets. Reported-by: Maximilian Riemensberger Cc: Graham Whaley Signed-off-by: Stefan Hajnoczi Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin commit 4cd376638c893cf5bf1072eeaac884f62b7ac71e Author: Steve French Date: Sat Nov 3 15:02:44 2018 -0500 cifs: In Kconfig CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs) [ Upstream commit 6e785302dad32228819d8066e5376acd15d0e6ba ] Missing a dependency. Shouldn't show cifs posix extensions in Kconfig if CONFIG_CIFS_ALLOW_INSECURE_DIALECTS (ie SMB1 protocol) is disabled. Signed-off-by: Steve French Reviewed-by: Pavel Shilovsky Signed-off-by: Sasha Levin commit ba89274f0ec3656e11d0ffd0890480e2fcc3ca3b Author: Sam Bobroff Date: Mon Dec 3 11:53:21 2018 +1100 drm/ast: Fix connector leak during driver unload [ Upstream commit e594a5e349ddbfdaca1951bb3f8d72f3f1660d73 ] When unloading the ast driver, a warning message is printed by drm_mode_config_cleanup() because a reference is still held to one of the drm_connector structs. Correct this by calling drm_crtc_force_disable_all() in ast_fbdev_destroy(). Signed-off-by: Sam Bobroff Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/1e613f3c630c7bbc72e04a44b178259b9164d2f6.1543798395.git.sbobroff@linux.ibm.com Signed-off-by: Sasha Levin commit 2198eb1229c245ee3eb2ae11877dc06c3777c279 Author: Nicolas Saenz Julienne Date: Mon Dec 3 13:21:01 2018 +0100 ethernet: fman: fix wrong of_node_put() in probe function [ Upstream commit ecb239d96d369c23c33d41708646df646de669f4 ] After getting a reference to the platform device's of_node the probe function ends up calling of_find_matching_node() using the node as an argument. The function takes care of decreasing the refcount on it. We are then incorrectly decreasing the refcount on that node again. This patch removes the unwarranted call to of_node_put(). Fixes: 414fd46e7762 ("fsl/fman: Add FMan support") Signed-off-by: Nicolas Saenz Julienne Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 493a06d37a28137b82e9d1cc380fe7ed0cae5030 Author: Vladimir Murzin Date: Fri Nov 23 12:25:21 2018 +0100 ARM: 8815/1: V7M: align v7m_dma_inv_range() with v7 counterpart [ Upstream commit 3d0358d0ba048c5afb1385787aaec8fa5ad78fcc ] Chris has discovered and reported that v7_dma_inv_range() may corrupt memory if address range is not aligned to cache line size. Since the whole cache-v7m.S was lifted form cache-v7.S the same observation applies to v7m_dma_inv_range(). So the fix just mirrors what has been done for v7 with a little specific of M-class. Cc: Chris Cole Signed-off-by: Vladimir Murzin Signed-off-by: Russell King Signed-off-by: Sasha Levin commit c711ec9a0f721b3d3a09bf1d3cc1fa23fa0cda04 Author: Chris Cole Date: Fri Nov 23 12:20:45 2018 +0100 ARM: 8814/1: mm: improve/fix ARM v7_dma_inv_range() unaligned address handling [ Upstream commit a1208f6a822ac29933e772ef1f637c5d67838da9 ] This patch addresses possible memory corruption when v7_dma_inv_range(start_address, end_address) address parameters are not aligned to whole cache lines. This function issues "invalidate" cache management operations to all cache lines from start_address (inclusive) to end_address (exclusive). When start_address and/or end_address are not aligned, the start and/or end cache lines are first issued "clean & invalidate" operation. The assumption is this is done to ensure that any dirty data addresses outside the address range (but part of the first or last cache lines) are cleaned/flushed so that data is not lost, which could happen if just an invalidate is issued. The problem is that these first/last partial cache lines are issued "clean & invalidate" and then "invalidate". This second "invalidate" is not required and worse can cause "lost" writes to addresses outside the address range but part of the cache line. If another component writes to its part of the cache line between the "clean & invalidate" and "invalidate" operations, the write can get lost. This fix is to remove the extra "invalidate" operation when unaligned addressed are used. A kernel module is available that has a stress test to reproduce the issue and a unit test of the updated v7_dma_inv_range(). It can be downloaded from http://ftp.sageembedded.com/outgoing/linux/cache-test-20181107.tgz. v7_dma_inv_range() is call by dmac_[un]map_area(addr, len, direction) when the direction is DMA_FROM_DEVICE. One can (I believe) successfully argue that DMA from a device to main memory should use buffers aligned to cache line size, because the "clean & invalidate" might overwrite data that the device just wrote using DMA. But if a driver does use unaligned buffers, at least this fix will prevent memory corruption outside the buffer. Signed-off-by: Chris Cole Signed-off-by: Russell King Signed-off-by: Sasha Levin commit ae30c98dcffd62635a86b967d75eabb07b53fed4 Author: Alexei Starovoitov Date: Mon Dec 3 22:46:04 2018 -0800 bpf: check pending signals while verifying programs [ Upstream commit c3494801cd1785e2c25f1a5735fa19ddcf9665da ] Malicious user space may try to force the verifier to use as much cpu time and memory as possible. Hence check for pending signals while verifying the program. Note that suspend of sys_bpf(PROG_LOAD) syscall will lead to EAGAIN, since the kernel has to release the resources used for program verification. Reported-by: Anatoly Trosinenko Signed-off-by: Alexei Starovoitov Acked-by: Daniel Borkmann Acked-by: Edward Cree Signed-off-by: Daniel Borkmann Signed-off-by: Sasha Levin commit 2b8b723ccf94371347346a7c247b708d0c8c9613 Author: Saeed Mahameed Date: Sun Dec 2 14:34:37 2018 +0200 net/mlx4_en: Fix build break when CONFIG_INET is off [ Upstream commit 1b603f9e4313348608f256b564ed6e3d9e67f377 ] MLX4_EN depends on NETDEVICES, ETHERNET and INET Kconfigs. Make sure they are listed in MLX4_EN Kconfig dependencies. This fixes the following build break: drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: ‘struct iphdr’ declared inside parameter list [enabled by default] struct iphdr *iph) ^ drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function ‘get_fixed_ipv4_csum’: drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type _u8 ipproto = iph->protocol; Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 24ed8c5302581cd70fe62533fb2969b7665e9ff1 Author: Anderson Luiz Alves Date: Fri Nov 30 21:58:36 2018 -0200 mv88e6060: disable hardware level MAC learning [ Upstream commit a74515604a7b171f2702bdcbd1e231225fb456d0 ] Disable hardware level MAC learning because it breaks station roaming. When enabled it drops all frames that arrive from a MAC address that is on a different port at learning table. Signed-off-by: Anderson Luiz Alves Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 6705f748b0a2efe6352460e551398e13b8e68bef Author: Juha-Matti Tilli Date: Sun Dec 2 12:47:08 2018 +0200 libata: whitelist all SAMSUNG MZ7KM* solid-state disks [ Upstream commit fd6f32f78645db32b6b95a42e45da2ddd6de0e67 ] These devices support read zero after trim (RZAT), as they advertise to the OS. However, the OS doesn't believe the SSDs unless they are explicitly whitelisted. Acked-by: Martin K. Petersen Signed-off-by: Juha-Matti Tilli Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 6ceb38129394c1a577dc02c4bc99993fa06d7ed2 Author: Tony Lindgren Date: Mon Dec 3 11:24:30 2018 -0800 Input: omap-keypad - fix keyboard debounce configuration [ Upstream commit 6c3516fed7b61a3527459ccfa67fab130d910610 ] I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by: Pavel Machek Signed-off-by: Tony Lindgren Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin commit 4ff9a2f211eade1f706a522285646ec5cfdd217e Author: Dan Carpenter Date: Mon Dec 3 17:51:43 2018 +0300 clk: mmp: Off by one in mmp_clk_add() [ Upstream commit 2e85c57493e391b93445c1e0d530b36b95becc64 ] The > comparison should be >= or we write one element beyond the end of the unit->clk_table[] array. (The unit->clk_table[] array is allocated in the mmp_clk_init() function and it has unit->nr_clks elements). Fixes: 4661fda10f8b ("clk: mmp: add basic support functions for DT support") Signed-off-by: Dan Carpenter Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin commit 38391d6b11449ee86e3f6af003e4218ab95d3bec Author: Dan Carpenter Date: Mon Dec 3 17:50:55 2018 +0300 clk: mvebu: Off by one bugs in cp110_of_clk_get() [ Upstream commit d9f5b7f5dd0fa74a89de5a7ac1e26366f211ccee ] These > comparisons should be >= to prevent reading beyond the end of of the clk_data->hws[] buffer. The clk_data->hws[] array is allocated in cp110_syscon_common_probe() when we do: cp110_clk_data = devm_kzalloc(dev, sizeof(*cp110_clk_data) + sizeof(struct clk_hw *) * CP110_CLK_NUM, GFP_KERNEL); As you can see, it has CP110_CLK_NUM elements which is equivalent to CP110_MAX_CORE_CLOCKS + CP110_MAX_GATABLE_CLOCKS. Fixes: d3da3eaef7f4 ("clk: mvebu: new driver for Armada CP110 system controller") Signed-off-by: Dan Carpenter Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin commit 6ecd4ae6760c043afb9b1920c45fca2906e7ffb0 Author: Yangtao Li Date: Tue Nov 20 08:02:49 2018 -0500 ide: pmac: add of_node_put() [ Upstream commit a51921c0db3fd26c4ed83dc0ec5d32988fa02aa5 ] use of_node_put() to release the refcount. Signed-off-by: Yangtao Li Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit f969b24ec770d40270ae43dfc0ac68c96db56f55 Author: Yangtao Li Date: Wed Nov 21 10:22:54 2018 -0500 drivers/tty: add missing of_node_put() [ Upstream commit dac097c4546e4c5b16dd303a1e97c1d319c8ab3e ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place is not doing this, so fix it. Signed-off-by: Yangtao Li Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 076bb557eeacb0366dd079bbab72acc0a6de2175 Author: Yangtao Li Date: Tue Nov 20 08:38:26 2018 -0500 drivers/sbus/char: add of_node_put() [ Upstream commit 6bd520ab7cf69486ea81fd3cdfd2d5a390ad1100 ] use of_node_put() to release the refcount. Signed-off-by: Yangtao Li Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 38d3f5fb60cecc34e8b7906d73dde635b14ed6de Author: Yangtao Li Date: Tue Nov 20 08:30:40 2018 -0500 sbus: char: add of_node_put() [ Upstream commit 87d81a23e24f24ebe014891e8bdf3ff8785031e8 ] use of_node_put() to release the refcount. Signed-off-by: Yangtao Li Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 5ba8d8b5a27c3d50f6544d1ce8c6732c8b36aedc Author: Trond Myklebust Date: Sat Dec 1 23:18:00 2018 -0500 SUNRPC: Fix a potential race in xprt_connect() [ Upstream commit 0a9a4304f3614e25d9de9b63502ca633c01c0d70 ] If an asynchronous connection attempt completes while another task is in xprt_connect(), then the call to rpc_sleep_on() could end up racing with the call to xprt_wake_pending_tasks(). So add a second test of the connection state after we've put the task to sleep and set the XPRT_CONNECTING flag, when we know that there can be no asynchronous connection attempts still in progress. Fixes: 0b9e79431377d ("SUNRPC: Move the test for XPRT_CONNECTING into...") Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin commit de42cd219802457caa61c001776281fe42deae9d Author: Dave Kleikamp Date: Tue Nov 27 19:31:30 2018 +0000 nfs: don't dirty kernel pages read by direct-io [ Upstream commit ad3cba223ac02dc769c3bbe88efe277bbb457566 ] When we use direct_IO with an NFS backing store, we can trigger a WARNING in __set_page_dirty(), as below, since we're dirtying the page unnecessarily in nfs_direct_read_completion(). To fix, replicate the logic in commit 53cbf3b157a0 ("fs: direct-io: don't dirtying pages for ITER_BVEC/ITER_KVEC direct read"). Other filesystems that implement direct_IO handle this; most use blockdev_direct_IO(). ceph and cifs have similar logic. mount 127.0.0.1:/export /nfs dd if=/dev/zero of=/nfs/image bs=1M count=200 losetup --direct-io=on -f /nfs/image mkfs.btrfs /dev/loop0 mount -t btrfs /dev/loop0 /mnt/ kernel: WARNING: CPU: 0 PID: 8067 at fs/buffer.c:580 __set_page_dirty+0xaf/0xd0 kernel: Modules linked in: loop(E) nfsv3(E) rpcsec_gss_krb5(E) nfsv4(E) dns_resolver(E) nfs(E) fscache(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) fuse(E) tun(E) ip6t_rpfilter(E) ipt_REJECT(E) nf_ kernel: snd_seq(E) snd_seq_device(E) snd_pcm(E) video(E) snd_timer(E) snd(E) soundcore(E) ip_tables(E) xfs(E) libcrc32c(E) sd_mod(E) sr_mod(E) cdrom(E) ata_generic(E) pata_acpi(E) crc32c_intel(E) ahci(E) li kernel: CPU: 0 PID: 8067 Comm: kworker/0:2 Tainted: G E 4.20.0-rc1.master.20181111.ol7.x86_64 #1 kernel: Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 kernel: Workqueue: nfsiod rpc_async_release [sunrpc] kernel: RIP: 0010:__set_page_dirty+0xaf/0xd0 kernel: Code: c3 48 8b 02 f6 c4 04 74 d4 48 89 df e8 ba 05 f7 ff 48 89 c6 eb cb 48 8b 43 08 a8 01 75 1f 48 89 d8 48 8b 00 a8 04 74 02 eb 87 <0f> 0b eb 83 48 83 e8 01 eb 9f 48 83 ea 01 0f 1f 00 eb 8b 48 83 e8 kernel: RSP: 0000:ffffc1c8825b7d78 EFLAGS: 00013046 kernel: RAX: 000fffffc0020089 RBX: fffff2b603308b80 RCX: 0000000000000001 kernel: RDX: 0000000000000001 RSI: ffff9d11478115c8 RDI: ffff9d11478115d0 kernel: RBP: ffffc1c8825b7da0 R08: 0000646f6973666e R09: 8080808080808080 kernel: R10: 0000000000000001 R11: 0000000000000000 R12: ffff9d11478115d0 kernel: R13: ffff9d11478115c8 R14: 0000000000003246 R15: 0000000000000001 kernel: FS: 0000000000000000(0000) GS:ffff9d115ba00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00007f408686f640 CR3: 0000000104d8e004 CR4: 00000000000606f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: Call Trace: kernel: __set_page_dirty_buffers+0xb6/0x110 kernel: set_page_dirty+0x52/0xb0 kernel: nfs_direct_read_completion+0xc4/0x120 [nfs] kernel: nfs_pgio_release+0x10/0x20 [nfs] kernel: rpc_free_task+0x30/0x70 [sunrpc] kernel: rpc_async_release+0x12/0x20 [sunrpc] kernel: process_one_work+0x174/0x390 kernel: worker_thread+0x4f/0x3e0 kernel: kthread+0x102/0x140 kernel: ? drain_workqueue+0x130/0x130 kernel: ? kthread_stop+0x110/0x110 kernel: ret_from_fork+0x35/0x40 kernel: ---[ end trace 01341980905412c9 ]--- Signed-off-by: Dave Kleikamp Signed-off-by: Santosh Shilimkar [forward-ported to v4.20] Signed-off-by: Calum Mackay Reviewed-by: Dave Kleikamp Reviewed-by: Chuck Lever Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin commit 2eb7e6fd37fb99c2476f2c6299efaaecbc19f2c5 Author: Toni Peltonen Date: Tue Nov 27 16:56:57 2018 +0200 bonding: fix 802.3ad state sent to partner when unbinding slave [ Upstream commit 3b5b3a3331d141e8f2a7aaae3a94dfa1e61ecbe4 ] Previously when unbinding a slave the 802.3ad implementation only told partner that the port is not suitable for aggregation by setting the port aggregation state from aggregatable to individual. This is not enough. If the physical layer still stays up and we only unbinded this port from the bond there is nothing in the aggregation status alone to prevent the partner from sending traffic towards us. To ensure that the partner doesn't consider this port at all anymore we should also disable collecting and distributing to signal that this actor is going away. Also clear AD_STATE_SYNCHRONIZATION to ensure partner exits collecting + distributing state. I have tested this behaviour againts Arista EOS switches with mlx5 cards (physical link stays up even when interface is down) and simulated the same situation virtually Linux <-> Linux with two network namespaces running two veth device pairs. In both cases setting aggregation to individual doesn't alone prevent traffic from being to sent towards this port given that the link stays up in partners end. Partner still keeps it's end in collecting + distributing state and continues until timeout is reached. In most cases this means we are losing the traffic partner sends towards our port while we wait for timeout. This is most visible with slow periodic time (LACP rate slow). Other open source implementations like Open VSwitch and libreswitch, and vendor implementations like Arista EOS, seem to disable collecting + distributing to when doing similar port disabling/detaching/removing change. With this patch kernel implementation would behave the same way and ensure partner doesn't consider our actor viable anymore. Signed-off-by: Toni Peltonen Signed-off-by: Jay Vosburgh Acked-by: Jonathan Toppins Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit beab9a76d4916e7477dc5f288ffb4149813c56be Author: Jose Abreu Date: Fri Nov 30 09:47:31 2018 +0000 ARC: io.h: Implement reads{x}()/writes{x}() [ Upstream commit 10d443431dc2bb733cf7add99b453e3fb9047a2e ] Some ARC CPU's do not support unaligned loads/stores. Currently, generic implementation of reads{b/w/l}()/writes{b/w/l}() is being used with ARC. This can lead to misfunction of some drivers as generic functions do a plain dereference of a pointer that can be unaligned. Let's use {get/put}_unaligned() helpers instead of plain dereference of pointer in order to fix. The helpers allow to get and store data from an unaligned address whilst preserving the CPU internal alignment. According to [1], the use of these helpers are costly in terms of performance so we added an initial check for a buffer already aligned so that the usage of the helpers can be avoided, when possible. [1] Documentation/unaligned-memory-access.txt Cc: Alexey Brodkin Cc: Joao Pinto Cc: David Laight Tested-by: Vitor Soares Signed-off-by: Jose Abreu Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin commit 945d5195c61222c4cfb222c076309f04464df81c Author: Sean Paul Date: Wed Oct 3 16:22:31 2018 -0400 drm/msm: Grab a vblank reference when waiting for commit_done [ Upstream commit 3b712e43e3876b42b38321ecf790a1f5fe59c834 ] Similar to the atomic helpers, we should enable vblank while we're waiting for the commit to finish. DPU needs this, MDP5 seems to work fine without it. Reviewed-by: Abhinav Kumar Signed-off-by: Sean Paul Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit 01edb9812380b6f9f321523fbb4e09377a2af208 Author: YiFei Zhu Date: Thu Nov 29 18:12:30 2018 +0100 x86/earlyprintk/efi: Fix infinite loop on some screen widths [ Upstream commit 79c2206d369b87b19ac29cb47601059b6bf5c291 ] An affected screen resolution is 1366 x 768, which width is not divisible by 8, the default font width. On such screens, when longer lines are earlyprintk'ed, overflow-to-next-line can never trigger, due to the left-most x-coordinate of the next character always less than the screen width. Earlyprintk will infinite loop in trying to print the rest of the string but unable to, due to the line being full. This patch makes the trigger consider the right-most x-coordinate, instead of left-most, as the value to compare against the screen width threshold. Signed-off-by: YiFei Zhu Signed-off-by: Ard Biesheuvel Cc: Andy Lutomirski Cc: Arend van Spriel Cc: Bhupesh Sharma Cc: Borislav Petkov Cc: Dave Hansen Cc: Eric Snowberg Cc: Hans de Goede Cc: Joe Perches Cc: Jon Hunter Cc: Julien Thierry Cc: Linus Torvalds Cc: Marc Zyngier Cc: Matt Fleming Cc: Nathan Chancellor Cc: Peter Zijlstra Cc: Sai Praneeth Prakhya Cc: Sedat Dilek Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181129171230.18699-12-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 7f928ef277bbafdf3d970502799cad70c3d870f5 Author: Cathy Avery Date: Tue Nov 27 14:28:53 2018 -0500 scsi: vmw_pscsi: Rearrange code to avoid multiple calls to free_irq during unload [ Upstream commit 02f425f811cefcc4d325d7a72272651e622dc97e ] Currently pvscsi_remove calls free_irq more than once as pvscsi_release_resources and __pvscsi_shutdown both call pvscsi_shutdown_intr. This results in a 'Trying to free already-free IRQ' warning and stack trace. To solve the problem pvscsi_shutdown_intr has been moved out of pvscsi_release_resources. Signed-off-by: Cathy Avery Reviewed-by: Ewan D. Milne Reviewed-by: Dan Carpenter Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 2ee718b1c537c597be502fcd85810b99ff7f4ff9 Author: Fred Herard Date: Tue Nov 20 20:22:45 2018 -0500 scsi: libiscsi: Fix NULL pointer dereference in iscsi_eh_session_reset [ Upstream commit 5db6dd14b31397e8cccaaddab2ff44ebec1acf25 ] This commit addresses NULL pointer dereference in iscsi_eh_session_reset. Reference should not be made to session->leadconn when session->state is set to ISCSI_STATE_TERMINATE. Signed-off-by: Fred Herard Reviewed-by: Konrad Rzeszutek Wilk Reviewed-by: Lee Duncan Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 3e5d4c14a7427dc2a24737c8dcc61688870d737a Author: Alexey Khoroshilov Date: Fri Oct 5 23:22:06 2018 +0300 mac80211_hwsim: fix module init error paths for netlink [ Upstream commit 05cc09de4c017663a217630682041066f2f9a5cd ] There is no unregister netlink notifier and family on error paths in init_mac80211_hwsim(). Also there is an error path where hwsim_class is not destroyed. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Fixes: 62759361eb49 ("mac80211-hwsim: Provide multicast event for HWSIM_CMD_NEW_RADIO") Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit c6bcf40f769294a80c64213f9175ccd408d64532 Author: Steven Rostedt (VMware) Date: Thu Jun 21 20:35:26 2018 -0400 locking/qspinlock: Fix build for anonymous union in older GCC compilers [ Upstream commit 6cc65be4f6f2a7186af8f3e09900787c7912dad2 ] One of my tests compiles the kernel with gcc 4.5.3, and I hit the following build error: include/linux/semaphore.h: In function 'sema_init': include/linux/semaphore.h:35:17: error: unknown field 'val' specified in initializer include/linux/semaphore.h:35:17: warning: missing braces around initializer include/linux/semaphore.h:35:17: warning: (near initialization for '(anonymous).raw_lock..val') I bisected it down to: 625e88be1f41 ("locking/qspinlock: Merge 'struct __qspinlock' into 'struct qspinlock'") ... which makes qspinlock have an anonymous union, which makes initializing it special for older compilers. By adding strategic brackets, it makes the build happy again. Signed-off-by: Steven Rostedt (VMware) Acked-by: Waiman Long Cc: Andrew Morton Cc: Boqun Feng Cc: Linus Torvalds Cc: Peter Zijlstra (Intel) Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Fixes: 625e88be1f41 ("locking/qspinlock: Merge 'struct __qspinlock' into 'struct qspinlock'") Link: http://lkml.kernel.org/r/20180621203526.172ab5c4@vmware.local.home Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 88ce30fb88a192d8bf3b789122030a85e6c3ce5a Author: Peter Zijlstra Date: Tue Dec 18 23:10:49 2018 +0100 locking/qspinlock, x86: Provide liveness guarantee commit 7aa54be2976550f17c11a1c3e3630002dea39303 upstream. On x86 we cannot do fetch_or() with a single instruction and thus end up using a cmpxchg loop, this reduces determinism. Replace the fetch_or() with a composite operation: tas-pending + load. Using two instructions of course opens a window we previously did not have. Consider the scenario: CPU0 CPU1 CPU2 1) lock trylock -> (0,0,1) 2) lock trylock /* fail */ 3) unlock -> (0,0,0) 4) lock trylock -> (0,0,1) 5) tas-pending -> (0,1,1) load-val <- (0,1,0) from 3 6) clear-pending-set-locked -> (0,0,1) FAIL: _2_ owners where 5) is our new composite operation. When we consider each part of the qspinlock state as a separate variable (as we can when _Q_PENDING_BITS == 8) then the above is entirely possible, because tas-pending will only RmW the pending byte, so the later load is able to observe prior tail and lock state (but not earlier than its own trylock, which operates on the whole word, due to coherence). To avoid this we need 2 things: - the load must come after the tas-pending (obviously, otherwise it can trivially observe prior state). - the tas-pending must be a full word RmW instruction, it cannot be an XCHGB for example, such that we cannot observe other state prior to setting pending. On x86 we can realize this by using "LOCK BTS m32, r32" for tas-pending followed by a regular load. Note that observing later state is not a problem: - if we fail to observe a later unlock, we'll simply spin-wait for that store to become visible. - if we observe a later xchg_tail(), there is no difference from that xchg_tail() having taken place before the tas-pending. Suggested-by: Will Deacon Reported-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Will Deacon Cc: Linus Torvalds Cc: Peter Zijlstra Cc: andrea.parri@amarulasolutions.com Cc: longman@redhat.com Fixes: 59fb586b4a07 ("locking/qspinlock: Remove unbounded cmpxchg() loop from locking slowpath") Link: https://lkml.kernel.org/r/20181003130957.183726335@infradead.org Signed-off-by: Ingo Molnar [bigeasy: GEN_BINARY_RMWcc macro redo] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Sasha Levin commit 8ae5642df23de3d2fce8f176943c0739abbeb9da Author: Will Deacon Date: Tue Dec 18 23:10:48 2018 +0100 locking/qspinlock/x86: Increase _Q_PENDING_LOOPS upper bound commit b247be3fe89b6aba928bf80f4453d1c4ba8d2063 upstream. On x86, atomic_cond_read_relaxed will busy-wait with a cpu_relax() loop, so it is desirable to increase the number of times we spin on the qspinlock lockword when it is found to be transitioning from pending to locked. According to Waiman Long: | Ideally, the spinning times should be at least a few times the typical | cacheline load time from memory which I think can be down to 100ns or | so for each cacheline load with the newest systems or up to several | hundreds ns for older systems. which in his benchmarking corresponded to 512 iterations. Suggested-by: Waiman Long Signed-off-by: Will Deacon Acked-by: Peter Zijlstra (Intel) Acked-by: Waiman Long Cc: Linus Torvalds Cc: Thomas Gleixner Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-5-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Sasha Levin commit f650bdcabf560f530b74a2266a17549fdf084161 Author: Peter Zijlstra Date: Tue Dec 18 23:10:47 2018 +0100 locking/qspinlock: Re-order code commit 53bf57fab7321fb42b703056a4c80fc9d986d170 upstream. Flip the branch condition after atomic_fetch_or_acquire(_Q_PENDING_VAL) such that we loose the indent. This also result in a more natural code flow IMO. Signed-off-by: Peter Zijlstra (Intel) Acked-by: Will Deacon Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: andrea.parri@amarulasolutions.com Cc: longman@redhat.com Link: https://lkml.kernel.org/r/20181003130257.156322446@infradead.org Signed-off-by: Ingo Molnar Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Sasha Levin commit 0952e8f0e62456d7b6eb0abb3f71213b7630cf0f Author: Will Deacon Date: Tue Dec 18 23:10:46 2018 +0100 locking/qspinlock: Kill cmpxchg() loop when claiming lock from head of queue commit c61da58d8a9ba9238250a548f00826eaf44af0f7 upstream. When a queued locker reaches the head of the queue, it claims the lock by setting _Q_LOCKED_VAL in the lockword. If there isn't contention, it must also clear the tail as part of this operation so that subsequent lockers can avoid taking the slowpath altogether. Currently this is expressed as a cmpxchg() loop that practically only runs up to two iterations. This is confusing to the reader and unhelpful to the compiler. Rewrite the cmpxchg() loop without the loop, so that a failed cmpxchg() implies that there is contention and we just need to write to _Q_LOCKED_VAL without considering the rest of the lockword. Signed-off-by: Will Deacon Acked-by: Peter Zijlstra (Intel) Acked-by: Waiman Long Cc: Linus Torvalds Cc: Thomas Gleixner Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-7-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Sasha Levin commit 0f28d5f4ce393354e50de2da743dc04e7bcd8667 Author: Will Deacon Date: Tue Dec 18 23:10:45 2018 +0100 locking/qspinlock: Remove duplicate clear_pending() function from PV code commit 3bea9adc96842b8a7345c7fb202c16ae9c8d5b25 upstream. The native clear_pending() function is identical to the PV version, so the latter can simply be removed. This fixes the build for systems with >= 16K CPUs using the PV lock implementation. Reported-by: Waiman Long Signed-off-by: Will Deacon Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/20180427101619.GB21705@arm.com Signed-off-by: Ingo Molnar Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Sasha Levin commit 9b5884372c792b0dade0cf22390a9516c870b7d7 Author: Will Deacon Date: Tue Dec 18 23:10:44 2018 +0100 locking/qspinlock: Remove unbounded cmpxchg() loop from locking slowpath commit 59fb586b4a07b4e1a0ee577140ab4842ba451acd upstream. The qspinlock locking slowpath utilises a "pending" bit as a simple form of an embedded test-and-set lock that can avoid the overhead of explicit queuing in cases where the lock is held but uncontended. This bit is managed using a cmpxchg() loop which tries to transition the uncontended lock word from (0,0,0) -> (0,0,1) or (0,0,1) -> (0,1,1). Unfortunately, the cmpxchg() loop is unbounded and lockers can be starved indefinitely if the lock word is seen to oscillate between unlocked (0,0,0) and locked (0,0,1). This could happen if concurrent lockers are able to take the lock in the cmpxchg() loop without queuing and pass it around amongst themselves. This patch fixes the problem by unconditionally setting _Q_PENDING_VAL using atomic_fetch_or, and then inspecting the old value to see whether we need to spin on the current lock owner, or whether we now effectively hold the lock. The tricky scenario is when concurrent lockers end up queuing on the lock and the lock becomes available, causing us to see a lockword of (n,0,0). With pending now set, simply queuing could lead to deadlock as the head of the queue may not have observed the pending flag being cleared. Conversely, if the head of the queue did observe pending being cleared, then it could transition the lock from (n,0,0) -> (0,0,1) meaning that any attempt to "undo" our setting of the pending bit could race with a concurrent locker trying to set it. We handle this race by preserving the pending bit when taking the lock after reaching the head of the queue and leaving the tail entry intact if we saw pending set, because we know that the tail is going to be updated shortly. Signed-off-by: Will Deacon Acked-by: Peter Zijlstra (Intel) Acked-by: Waiman Long Cc: Linus Torvalds Cc: Thomas Gleixner Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-6-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Sasha Levin commit 60668f3cddf1b25a954b198cade0ce726a6853ab Author: Will Deacon Date: Tue Dec 18 23:10:43 2018 +0100 locking/qspinlock: Merge 'struct __qspinlock' into 'struct qspinlock' commit 625e88be1f41b53cec55827c984e4a89ea8ee9f9 upstream. 'struct __qspinlock' provides a handy union of fields so that subcomponents of the lockword can be accessed by name, without having to manage shifts and masks explicitly and take endianness into account. This is useful in qspinlock.h and also potentially in arch headers, so move the 'struct __qspinlock' into 'struct qspinlock' and kill the extra definition. Signed-off-by: Will Deacon Acked-by: Peter Zijlstra (Intel) Acked-by: Waiman Long Acked-by: Boqun Feng Cc: Linus Torvalds Cc: Thomas Gleixner Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-3-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Sasha Levin commit 8e5b3bcc5291092aaac4cadc0b5fb46182172ed3 Author: Will Deacon Date: Tue Dec 18 23:10:42 2018 +0100 locking/qspinlock: Bound spinning on pending->locked transition in slowpath commit 6512276d97b160d90b53285bd06f7f201459a7e3 upstream. If a locker taking the qspinlock slowpath reads a lock value indicating that only the pending bit is set, then it will spin whilst the concurrent pending->locked transition takes effect. Unfortunately, there is no guarantee that such a transition will ever be observed since concurrent lockers could continuously set pending and hand over the lock amongst themselves, leading to starvation. Whilst this would probably resolve in practice, it means that it is not possible to prove liveness properties about the lock and means that lock acquisition time is unbounded. Rather than removing the pending->locked spinning from the slowpath altogether (which has been shown to heavily penalise a 2-threaded locking stress test on x86), this patch replaces the explicit spinning with a call to atomic_cond_read_relaxed and allows the architecture to provide a bound on the number of spins. For architectures that can respond to changes in cacheline state in their smp_cond_load implementation, it should be sufficient to use the default bound of 1. Suggested-by: Waiman Long Signed-off-by: Will Deacon Acked-by: Peter Zijlstra (Intel) Acked-by: Waiman Long Cc: Linus Torvalds Cc: Thomas Gleixner Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-4-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Sasha Levin commit 48c42d4dfec408760d15acc334d91208a6b2262e Author: Will Deacon Date: Tue Dec 18 23:10:41 2018 +0100 locking/qspinlock: Ensure node is initialised before updating prev->next commit 95bcade33a8af38755c9b0636e36a36ad3789fe6 upstream. When a locker ends up queuing on the qspinlock locking slowpath, we initialise the relevant mcs node and publish it indirectly by updating the tail portion of the lock word using xchg_tail. If we find that there was a pre-existing locker in the queue, we subsequently update their ->next field to point at our node so that we are notified when it's our turn to take the lock. This can be roughly illustrated as follows: /* Initialise the fields in node and encode a pointer to node in tail */ tail = initialise_node(node); /* * Exchange tail into the lockword using an atomic read-modify-write * operation with release semantics */ old = xchg_tail(lock, tail); /* If there was a pre-existing waiter ... */ if (old & _Q_TAIL_MASK) { prev = decode_tail(old); smp_read_barrier_depends(); /* ... then update their ->next field to point to node. WRITE_ONCE(prev->next, node); } The conditional update of prev->next therefore relies on the address dependency from the result of xchg_tail ensuring order against the prior initialisation of node. However, since the release semantics of the xchg_tail operation apply only to the write portion of the RmW, then this ordering is not guaranteed and it is possible for the CPU to return old before the writes to node have been published, consequently allowing us to point prev->next to an uninitialised node. This patch fixes the problem by making the update of prev->next a RELEASE operation, which also removes the reliance on dependency ordering. Signed-off-by: Will Deacon Acked-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1518528177-19169-2-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Sasha Levin commit c3b6e79fbf295c9cda4dd1828a8f0593cad53d48 Author: Paul E. McKenney Date: Tue Dec 18 23:10:40 2018 +0100 locking: Remove smp_read_barrier_depends() from queued_spin_lock_slowpath() commit 548095dea63ffc016d39c35b32c628d033638aca upstream. Queued spinlocks are not used by DEC Alpha, and furthermore operations such as READ_ONCE() and release/relaxed RMW atomics are being changed to imply smp_read_barrier_depends(). This commit therefore removes the now-redundant smp_read_barrier_depends() from queued_spin_lock_slowpath(), and adjusts the comments accordingly. Signed-off-by: Paul E. McKenney Cc: Peter Zijlstra Cc: Ingo Molnar Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Sasha Levin commit d395117fac7943da6966ccbac3b95651f5581f15 Author: Michael J. Ruhl Date: Tue Dec 18 16:08:32 2018 -0500 IB/hfi1: Remove race conditions in user_sdma send path commit 28a9a9e83ceae2cee25b9af9ad20d53aaa9ab951 upstream Packet queue state is over used to determine SDMA descriptor availablitity and packet queue request state. cpu 0 ret = user_sdma_send_pkts(req, pcount); cpu 0 if (atomic_read(&pq->n_reqs)) cpu 1 IRQ user_sdma_txreq_cb calls pq_update() (state to _INACTIVE) cpu 0 xchg(&pq->state, SDMA_PKT_Q_ACTIVE); At this point pq->n_reqs == 0 and pq->state is incorrectly SDMA_PKT_Q_ACTIVE. The close path will hang waiting for the state to return to _INACTIVE. This can also change the state from _DEFERRED to _ACTIVE. However, this is a mostly benign race. Remove the racy code path. Use n_reqs to determine if a packet queue is active or not. Cc: # 4.9.0 Reviewed-by: Mitko Haralanov Reviewed-by: Mike Marciniszyn Signed-off-by: Michael J. Ruhl Signed-off-by: Sasha Levin commit 0715895a55b42f6218f194ce174efa72e34484d6 Author: Ilan Peer Date: Tue Apr 3 11:35:22 2018 +0300 mac80211: Fix condition validating WMM IE [ Upstream commit 911a26484c33e10de6237228ca1d7293548e9f49 ] Commit c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs") handled cases where an AP reports a zeroed WMM IE. However, the condition that checks the validity accessed the wrong index in the ieee80211_tx_queue_params array, thus wrongly deducing that the parameters are invalid. Fix it. Fixes: c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs") Signed-off-by: Ilan Peer Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 7a4b56ae85f67f749df6c8d7a8f92d2cab880904 Author: Emmanuel Grumbach Date: Mon Mar 26 16:21:04 2018 +0300 mac80211: don't WARN on bad WMM parameters from buggy APs [ Upstream commit c470bdc1aaf36669e04ba65faf1092b2d1c6cabe ] Apparently, some APs are buggy enough to send a zeroed WMM IE. Don't WARN on this since this is not caused by a bug on the client's system. This aligns the condition of the WARNING in drv_conf_tx with the validity check in ieee80211_sta_wmm_params. We will now pick the default values whenever we get a zeroed WMM IE. This has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=199161 Fixes: f409079bb678 ("mac80211: sanity check CW_min/CW_max towards driver") Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 02366eccf81feeeaf329bbfda3dcce86468566fd Author: Chris Wilson Date: Thu Dec 6 08:44:31 2018 +0000 drm/i915/execlists: Apply a full mb before execution for Braswell commit cf66b8a0ba142fbd1bf10ac8f3ae92d1b0cb7b8f upstream. Braswell is really picky about having our writes posted to memory before we execute or else the GPU may see stale values. A wmb() is insufficient as it only ensures the writes are visible to other cores, we need a full mb() to ensure the writes are in memory and visible to the GPU. The most frequent failure in flushing before execution is that we see stale PTE values and execute the wrong pages. References: 987abd5c62f9 ("drm/i915/execlists: Force write serialisation into context image vs execution") Signed-off-by: Chris Wilson Cc: Mika Kuoppala Cc: Tvrtko Ursulin Cc: Joonas Lahtinen Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20181206084431.9805-3-chris@chris-wilson.co.uk (cherry picked from commit 490b8c65b9db45896769e1095e78725775f47b3e) Signed-off-by: Joonas Lahtinen Signed-off-by: Greg Kroah-Hartman commit af20483dbd7c2a01f7874191524fc0397b9d3bec Author: Brian Norris Date: Wed Dec 5 10:16:57 2018 -0800 Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec" commit 63238173b2faf3d6b85a416f1c69af6c7be2413f upstream. This reverts commit 7f3ef5dedb146e3d5063b6845781ad1bb59b92b5. It causes new warnings [1] on shutdown when running the Google Kevin or Scarlet (RK3399) boards under Chrome OS. Presumably our usage of DRM is different than what Marc and Heiko test. We're looking at a different approach (e.g., [2]) to replace this, but IMO the revert should be taken first, as it already propagated to -stable. [1] Report here: http://lkml.kernel.org/lkml/20181205030127.GA200921@google.com WARNING: CPU: 4 PID: 2035 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x1c4/0x294 ... Call trace: drm_mode_config_cleanup+0x1c4/0x294 rockchip_drm_unbind+0x4c/0x8c component_master_del+0x88/0xb8 rockchip_drm_platform_remove+0x2c/0x44 rockchip_drm_platform_shutdown+0x20/0x2c platform_drv_shutdown+0x2c/0x38 device_shutdown+0x164/0x1b8 kernel_restart_prepare+0x40/0x48 kernel_restart+0x20/0x68 ... Memory manager not clean during takedown. WARNING: CPU: 4 PID: 2035 at drivers/gpu/drm/drm_mm.c:950 drm_mm_takedown+0x34/0x44 ... drm_mm_takedown+0x34/0x44 rockchip_drm_unbind+0x64/0x8c component_master_del+0x88/0xb8 rockchip_drm_platform_remove+0x2c/0x44 rockchip_drm_platform_shutdown+0x20/0x2c platform_drv_shutdown+0x2c/0x38 device_shutdown+0x164/0x1b8 kernel_restart_prepare+0x40/0x48 kernel_restart+0x20/0x68 ... [2] https://patchwork.kernel.org/patch/10556151/ https://www.spinics.net/lists/linux-rockchip/msg21342.html [PATCH] drm/rockchip: shutdown drm subsystem on shutdown Fixes: 7f3ef5dedb14 ("drm/rockchip: Allow driver to be shutdown on reboot/kexec") Cc: Jeffy Chen Cc: Robin Murphy Cc: Vicente Bergas Cc: Marc Zyngier Cc: Heiko Stuebner Cc: stable@vger.kernel.org Signed-off-by: Brian Norris Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20181205181657.177703-1-briannorris@chromium.org Signed-off-by: Greg Kroah-Hartman commit b0daf4e6324f5164f91d8b9fcb4530e2928faf00 Author: Radu Rendec Date: Tue Nov 27 22:20:48 2018 -0500 powerpc/msi: Fix NULL pointer access in teardown code commit 78e7b15e17ac175e7eed9e21c6f92d03d3b0a6fa upstream. The arch_teardown_msi_irqs() function assumes that controller ops pointers were already checked in arch_setup_msi_irqs(), but this assumption is wrong: arch_teardown_msi_irqs() can be called even when arch_setup_msi_irqs() returns an error (-ENOSYS). This can happen in the following scenario: - msi_capability_init() calls pci_msi_setup_msi_irqs() - pci_msi_setup_msi_irqs() returns -ENOSYS - msi_capability_init() notices the error and calls free_msi_irqs() - free_msi_irqs() calls pci_msi_teardown_msi_irqs() This is easier to see when CONFIG_PCI_MSI_IRQ_DOMAIN is not set and pci_msi_setup_msi_irqs() and pci_msi_teardown_msi_irqs() are just aliases to arch_setup_msi_irqs() and arch_teardown_msi_irqs(). The call to free_msi_irqs() upon pci_msi_setup_msi_irqs() failure seems legit, as it does additional cleanup; e.g. list_del(&entry->list) and kfree(entry) inside free_msi_irqs() do happen (MSI descriptors are allocated before pci_msi_setup_msi_irqs() is called and need to be cleaned up if that fails). Fixes: 6b2fd7efeb88 ("PCI/MSI/PPC: Remove arch_msi_check_device()") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Radu Rendec Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman commit 326c9e17c1202e820f221946e07d13cbf8c9f964 Author: Steven Rostedt (VMware) Date: Mon Dec 10 23:58:01 2018 -0500 tracing: Fix memory leak of instance function hash filters commit 2840f84f74035e5a535959d5f17269c69fa6edc5 upstream. The following commands will cause a memory leak: # cd /sys/kernel/tracing # mkdir instances/foo # echo schedule > instance/foo/set_ftrace_filter # rmdir instances/foo The reason is that the hashes that hold the filters to set_ftrace_filter and set_ftrace_notrace are not freed if they contain any data on the instance and the instance is removed. Found by kmemleak detector. Cc: stable@vger.kernel.org Fixes: 591dffdade9f ("ftrace: Allow for function tracing instance to filter functions") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 5e8e777a42e8ec993afc8cfd3464dee6a1fb1ced Author: Steven Rostedt (VMware) Date: Sun Dec 9 21:17:30 2018 -0500 tracing: Fix memory leak in set_trigger_filter() commit 3cec638b3d793b7cacdec5b8072364b41caeb0e1 upstream. When create_event_filter() fails in set_trigger_filter(), the filter may still be allocated and needs to be freed. The caller expects the data->filter to be updated with the new filter, even if the new filter failed (we could add an error message by setting set_str parameter of create_event_filter(), but that's another update). But because the error would just exit, filter was left hanging and nothing could free it. Found by kmemleak detector. Cc: stable@vger.kernel.org Fixes: bac5fb97a173a ("tracing: Add and use generic set_trigger_filter() implementation") Reviewed-by: Tom Zanussi Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 6c4fbbd96b3daa4fb9d3eef0cf8b22336c8739f9 Author: Lubomir Rintel Date: Sun Dec 2 12:12:24 2018 +0100 ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt commit 76f4e2c3b6a560cdd7a75b87df543e04d05a9e5f upstream. cpu_is_mmp2() was equivalent to cpu_is_pj4(), wouldn't be correct for multiplatform kernels. Fix it by also considering mmp_chip_id, as is done for cpu_is_pxa168() and cpu_is_pxa910() above. Moreover, it is only available with CONFIG_CPU_MMP2 and thus doesn't work on DT-based MMP2 machines. Enable it on CONFIG_MACH_MMP2_DT too. Note: CONFIG_CPU_MMP2 is only used for machines that use board files instead of DT. It should perhaps be renamed. I'm not doing it now, because I don't have a better idea. Signed-off-by: Lubomir Rintel Acked-by: Arnd Bergmann Cc: stable@vger.kernel.org Signed-off-by: Olof Johansson Signed-off-by: Greg Kroah-Hartman commit 5c2590dc3e2520157ebb6e84a372578bc80118f7 Author: Aaro Koskinen Date: Tue Nov 20 01:14:00 2018 +0200 MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310 commit e8cde625bfe8a714a856e1366bcbb259d7346095 upstream. Since v2.6.22 or so there has been reports [1] about OMAP MMC being broken on OMAP15XX based hardware (OMAP5910 and OMAP310). The breakage seems to have been caused by commit 46a6730e3ff9 ("mmc-omap: Fix omap to use MMC_POWER_ON") that changed clock enabling to be done on MMC_POWER_ON. This can happen multiple times in a row, and on 15XX the hardware doesn't seem to like it and the MMC just stops responding. Fix by memorizing the power mode and do the init only when necessary. Before the patch (on Palm TE): mmc0: new SD card at address b368 mmcblk0: mmc0:b368 SDC 977 MiB mmci-omap mmci-omap.0: command timeout (CMD18) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD12) [x 6] mmci-omap mmci-omap.0: command timeout (CMD13) [x 6] mmcblk0: error -110 requesting status mmci-omap mmci-omap.0: command timeout (CMD8) mmci-omap mmci-omap.0: command timeout (CMD18) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD12) [x 6] mmci-omap mmci-omap.0: command timeout (CMD13) [x 6] mmcblk0: error -110 requesting status mmcblk0: recovery failed! print_req_error: I/O error, dev mmcblk0, sector 0 Buffer I/O error on dev mmcblk0, logical block 0, async page read mmcblk0: unable to read partition table After the patch: mmc0: new SD card at address b368 mmcblk0: mmc0:b368 SDC 977 MiB mmcblk0: p1 The patch is based on a fix and analysis done by Ladislav Michl. Tested on OMAP15XX/OMAP310 (Palm TE), OMAP1710 (Nokia 770) and OMAP2420 (Nokia N810). [1] https://marc.info/?t=123175197000003&r=1&w=2 Fixes: 46a6730e3ff9 ("mmc-omap: Fix omap to use MMC_POWER_ON") Reported-by: Ladislav Michl Reported-by: Andrzej Zaborowski Tested-by: Ladislav Michl Acked-by: Tony Lindgren Signed-off-by: Aaro Koskinen Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 3a7bac902691cd92cb69f95d98dc675dea8b3228 Author: Jeff Moyer Date: Tue Dec 11 12:37:49 2018 -0500 aio: fix spectre gadget in lookup_ioctx commit a538e3ff9dabcdf6c3f477a373c629213d1c3066 upstream. Matthew pointed out that the ioctx_table is susceptible to spectre v1, because the index can be controlled by an attacker. The below patch should mitigate the attack for all of the aio system calls. Cc: stable@vger.kernel.org Reported-by: Matthew Wilcox Reported-by: Dan Carpenter Signed-off-by: Jeff Moyer Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 4cf3b84a10eae6d6d9b6bd369b6906ae7532abd1 Author: Chen-Yu Tsai Date: Tue Dec 4 17:04:57 2018 +0800 pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11 commit 478b6767ad26ab86d9ecc341027dd09a87b1f997 upstream. Pin PH11 is used on various A83T board to detect a change in the OTG port's ID pin, as in when an OTG host cable is plugged in. The incorrect offset meant the gpiochip/irqchip was activating the wrong pin for interrupts. Fixes: 4730f33f0d82 ("pinctrl: sunxi: add allwinner A83T PIO controller support") Cc: Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman commit 1098aad93c4a05a0165fd008e13be99201a9e621 Author: Ingo Molnar Date: Mon Nov 13 07:15:41 2017 +0100 timer/debug: Change /proc/timer_list from 0444 to 0400 [ Upstream commit 8e7df2b5b7f245c9bd11064712db5cb69044a362 ] While it uses %pK, there's still few reasons to read this file as non-root. Suggested-by: Linus Torvalds Acked-by: Thomas Gleixner Cc: Peter Zijlstra Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 36c9eca096a72ba02df39d653ae7005825dce65a Author: Davidlohr Bueso Date: Mon Jul 10 15:51:49 2017 -0700 lib/interval_tree_test.c: allow users to limit scope of endpoint [ Upstream commit a8ec14d4f6aa8e245efacc992c8ee6ea0464ce2a ] Add a 'max_endpoint' parameter such that users may easily limit the size of the intervals that are randomly generated. Link: http://lkml.kernel.org/r/20170518174936.20265-4-dave@stgolabs.net Signed-off-by: Davidlohr Bueso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit c07f4060708d136071aeac63b8dd898233694812 Author: Davidlohr Bueso Date: Fri Nov 17 15:28:27 2017 -0800 lib/rbtree-test: lower default params [ Upstream commit 0b548e33e6cb2bff240fdaf1783783be15c29080 ] Fengguang reported soft lockups while running the rbtree and interval tree test modules. The logic for these tests all occur in init phase, and we currently are pounding with the default values for number of nodes and number of iterations of each test. Reduce the latter by two orders of magnitude. This does not influence the value of the tests in that one thousand times by default is enough to get the picture. Link: http://lkml.kernel.org/r/20171109161715.xai2dtwqw2frhkcm@linux-n805 Signed-off-by: Davidlohr Bueso Reported-by: Fengguang Wu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit b7d8b9cb820e74fe466ff0108893c08f28f3ebc1 Author: Davidlohr Bueso Date: Fri Sep 8 16:14:46 2017 -0700 lib/rbtree_test.c: make input module parameters [ Upstream commit 223f8911eace60c787f8767c25148b80ece9732a ] Allows for more flexible debugging. Link: http://lkml.kernel.org/r/20170719014603.19029-5-dave@stgolabs.net Signed-off-by: Davidlohr Bueso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 5e03c490303c03a4f35e72f2209a79a19d954454 Author: Davidlohr Bueso Date: Mon Jul 10 15:51:52 2017 -0700 lib/interval_tree_test.c: allow full tree search [ Upstream commit c46ecce431ebe6b1a9551d1f530eb432dae5c39b ] ... such that a user can specify visiting all the nodes in the tree (intersects with the world). This is a nice opposite from the very basic default query which is a single point. Link: http://lkml.kernel.org/r/20170518174936.20265-5-dave@stgolabs.net Signed-off-by: Davidlohr Bueso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit c114bdd5842b05f1d1079927074645b79edb6fc1 Author: Davidlohr Bueso Date: Mon Jul 10 15:51:46 2017 -0700 lib/interval_tree_test.c: make test options module parameters [ Upstream commit a54dae0338b7f01eb0f9c7571fb9b74f791d1c6b ] Allows for more flexible debugging. Link: http://lkml.kernel.org/r/20170518174936.20265-3-dave@stgolabs.net Signed-off-by: Davidlohr Bueso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 1e7066a4540b39d475782122db60cf93633dca48 Author: Will Deacon Date: Wed Sep 5 15:34:42 2018 +0100 signal: Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack commit 22839869f21ab3850fbbac9b425ccc4c0023926f upstream. The sigaltstack(2) system call fails with -ENOMEM if the new alternative signal stack is found to be smaller than SIGMINSTKSZ. On architectures such as arm64, where the native value for SIGMINSTKSZ is larger than the compat value, this can result in an unexpected error being reported to a compat task. See, for example: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=904385 This patch fixes the problem by extending do_sigaltstack to take the minimum signal stack size as an additional parameter, allowing the native and compat system call entry code to pass in their respective values. COMPAT_SIGMINSTKSZ is just defined as SIGMINSTKSZ if it has not been defined by the architecture. Cc: Arnd Bergmann Cc: Dominik Brodowski Cc: "Eric W. Biederman" Cc: Andrew Morton Cc: Al Viro Cc: Oleg Nesterov Reported-by: Steve McIntyre Tested-by: Steve McIntyre <93sam@debian.org> Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas [signal: Fix up cherry-pick conflicts for 22839869f21a] Signed-off-by: Steve McIntyre <93sam@debian.org> Signed-off-by: Greg Kroah-Hartman