Internet-Draft OAuth Status Assertions June 2024
Marco, et al. Expires 20 December 2024 [Page]
Workgroup:
Network Working Group
Internet-Draft:
draft-demarco-oauth-status-assertions-02
Published:
Intended Status:
Informational
Expires:
Authors:
G. D. Marco
Dipartimento per la trasformazione digitale
O. Steele
Transmute
F. Marino
Istituto Poligrafico e Zecca dello Stato

OAuth Status Assertions

Abstract

Status Assertion is a signed object that demonstrates the validity status of a digital credential. These assertions are periodically provided to holders, who can present these to verifier along with the corresponding digital credentials. The approach outlined in this document makes the verifier able to check the non-revocation of a digital credential without requiring to query any third-party entities.

About This Document

This note is to be removed before publishing as an RFC.

The latest revision of this draft can be found at https://peppelinux.github.io/draft-demarco-oauth-status-assertions/draft-demarco-oauth-status-assertions.html. Status information for this document may be found at https://datatracker.ietf.org/doc/draft-demarco-oauth-status-assertions/.

Source for this draft and an issue tracker can be found at https://github.com/peppelinux/draft-demarco-oauth-status-assertions.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 20 December 2024.

Table of Contents

1. Introduction

Status Assertions ensure the non-revocation of digital credentials, whether in JSON Web Tokens (JWT) or CBOR Web Tokens (CWT) format. Status Assertions function similarly to OCSP Stapling ([RFC6066]), allowing clients to present to the relying parties time-stamped assertions provided by the credential issuer. The approach outlined in this specification enables the verification of credentials against revocation without direct queries to third-party systems, enhancing privacy, reducing latency, and faciliting offline verification.

The figure below illustrates the process by which a client, such as a wallet instance, requests and obtains a Status Assertion from the credential issuer.

+-----------------+                              +-------------------+
|                 | Requests Status Assertions   |                   |
|                 |----------------------------->|                   |
| Client          |                              | Credential Issuer |
|                 | Status Assertions            |                   |
|                 |<-----------------------------|                   |
+-----------------+                              +-------------------+

Figure 1: Status Assertion Issuance Flow.

The figure below illustrates the process by which a client presents the Status Assertion along with the corresponding digital credential.

+-- ----------------+                             +----------+
|                   | Presents Digital Credential |          |
| Client            | and Status Assertion        | Verifier |
|                   |---------------------------->|          |
+-------------------+                             +----------+

Figure 2: Status Assertion Presentation Flow.

In summary, the credential issuer provides the client with a Status Assertion, which is linked to a Digital Credential. This enables the client to present both the digital credential and its Status Assertion to a verifier as proof of the digital credential's validity status.

2. Conventions and Definitions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

3. Terminology

This specification uses the terms "End-User", "Entity" as defined by OpenID Connect Core [OpenID.Core], the term "JSON Web Token (JWT)" defined by JSON Web Token (JWT) [RFC7519], the term "CBOR Web Token (CWT)" defined in [RFC8392], "Client" as defined [RFC6749], "Verifiable Presentation" defined in [@OpenID4VP].

Digital Credential:

A set of one or more claims about a subject made by a Credential Issuer. Alternative names are "Verifiable Credential" or "Credential".

Holder:

An entity that possesses Verifiable Credentials and has control over them to present them to the Verifiers as Verifiable Presentations.

Credential Issuer:

Entity that is responsible for the issuance of the Digital Credentials. The Issuer is responsible for the lifecycle of their issued Digital Credentials and their validity status.

Verifier:

Entity that relies on the validity of the Digital Credentials presented to it. This Entity, also known as a Relying Party, verifies the authenticity and validity of the Digital Credentials, including their revocation status, before accepting them.

Wallet Instance:

The digital Wallet in control of a User, also known as Wallet. It securely stores the User's Digital Credentials. It can present Digital Credentials to Verifiers and request Status Assertions from Issuers under the control of the User. For the purposes of this specification, the Wallet Instance is considered as a Client.

4. Rationale

There are cases where the Verifier only needs to check the revocation status of a Digital Credential at the time of presentation, and therefore it should not be allowed to check the status of a Digital Credential over time due to some privacy constraints, in compliance with national privacy regulations.

For instance, consider a scenario where a Verifier's repeated access to a status list, such as the one defined in [draft-ietf-oauth-status-list] to check the revocation status of a Digital Credential could be deemed as excessive monitoring of the End-User's activities.

This could potentially infringe upon the End-User's right to privacy, as outlined in [ECHR-ART8] and in the the European Union's General Data Protection Regulation [GDPR], by creating a detailed profile of the End-User's Digital Credential status without explicit consent for such continuous surveillance.

5. Requirements

The general requirements for the implementation of Status Assertion are listed in this section. The Status Assertion:

6. Proof of Possession of a Credential

The concept of Proof of Possession (PoP) of a Credential within the framework of the Status Assertion specification encompasses a broader perspective than merely possessing the digital bytes of the Credential.

It involves demonstrating rightful control or ownership over the Credential, which can manifest in various forms depending on the technology employed and the nature of the Digital Credential itself. For instance, a Digital Credential could be presented visually (de-visu) with a personal portrait serving as a binding element.

While this specification does not prescribe any additional methods for the proof of possession of the Credential, it aims to offer guidance for concrete implementations utilizing common proof of possession mechanisms. This includes, but is not limited to:

  1. Having the digital representation of the Digital Credential (the bytes).

  2. Controlling the confirmation method of the Credential, using the Credential's cnf parameter.

The essence of requiring proof of possession over the Credential through the confirmation method, such has proving the control of the cryptographic material related to a Credential, is to ensure that the entity in possession of the Credential can execute actions exclusively reserved to the legitimate Holder. The dual-layered approach of requiring both possession of the Credential and control over it, reinforces the security and integrity of the Status Assertion process. This ensures that the Holder requesting a Status Assertion is indeed the same Holder to which the Credential was originally issued, affirming the authenticity and rightful possession of the Credential.

7. Status Assertion Request

The following diagram shows the Wallet Instance requesting a Status Assertion to a Credential Issuer, related to a specific Credential issued by the same Credential Issuer.

+-------------------+                                  +--------------------+
|                   |                                  |                    |
|  Wallet Instance  |                                  | Credential Issuer  |
|                   |                                  |                    |
+--------+----------+                                  +----------+---------+
         |                                                        |
         | HTTP POST /status                                      |
         |  status_assertion_requests = [$StatusAssertionRequest] |
         +-------------------------------------------------------->
         |                                                        |
         |  Status Assertion Responses [...]                      |
         <--------------------------------------------------------+
         |                                                        |
+--------+----------+                                  +----------+---------+
|                   |                                  |                    |
|  Wallet Instance  |                                  | Credential Issuer  |
|                   |                                  |                    |
+-------------------+                                  +--------------------+

The Wallet Instance sends the Status Assertion request to the Credential Issuer, where:

The Status Assertion Request object MUST contain the parameters defined in the following table.

Table 1
Header Description Reference
typ It MUST be set to status-assertion-request+jwt when JWT format is used. It MUST be set to status-assertion-request+cwt when CWT format is used. [RFC7516] Section 4.1.1, [RFC9596]
alg A digital signature algorithm identifier such as per IANA "JSON Web Signature and Encryption Algorithms" registry. It MUST NOT be set to none or any symmetric algorithm (MAC) identifier. [RFC7516] Section 4.1.1
Table 2
Payload Description Reference
iss Status Assertion Request Issuer identifier. The value is supposed to be used for identifying the Wallet that has issued the request. It is out of scope for this document defining how this value should be set. [RFC9126], [RFC7519]
aud It MUST be set with the Credential Issuer Status Assertion endpoint URL as value that identify the intended audience. [RFC9126], [RFC7519]
exp UNIX Timestamp with the expiration time of the JWT. It MUST be superior to the value set for iat . [RFC9126], [RFC7519], [RFC7515]
iat UNIX Timestamp with the time of JWT/CWT issuance. [RFC9126], [RFC7519]
jti Unique identifier for the JWT. [RFC7519] Section 4.1.7
cti Unique identifier for the CWT. [RFC7519] Section 4.1.7
credential_hash Hash value of the Digital Credential the Status Assertion is bound to. this specification
credential_hash_alg The Algorithm used of hashing the Digital Credential to which the Status Assertion is bound. The value SHOULD be set to sha-256. this specification

Below is a non-normative example of a Status Assertion Request with the JWT headers and payload represented without applying signature and encoding:

{
    "alg": "ES256",
    "typ": "status-assertion-request+jwt"
}
.
{
    "iss": "0b434530-e151-4c40-98b7-74c75a5ef760",
    "aud": "https://issuer.example.org/status-assertion-endpoint",
    "iat": 1698744039,
    "exp": 1698830439,
    "jti": "6f204f7e-e453-4dfd-814e-9d155319408c",
    "credential_hash": $hash-about-Issuer-Signed-JWT
    "credential_hash_alg": "sha-256"
}

Below is a non-normative example of a Status Assertion Request object in CWT format represented in CBOR diagnostic notation format [RFC8152], where the CWT headers and payload are presented without applying signature and encoding for better readability:

   [
       / protected / << {
       / alg / 1: -7 / ES256 /
       / typ / 16: -7 / status-assertion-request+cwt /
     } >>,
     / unprotected / {
     },
     / payload / << {
       / iss    / 1: 0b434530-e151-4c40-98b7-74c75a5ef760 /,
       / aud    / 3: https://issuer.example.org/status-assertion-endpoint /,
       / iat    / 6: 1698744039 /,
       / exp    / 4: 1698830439 /,
       / cti    / 7: 6f204f7e-e453-4dfd-814e-9d155319408c /,
       / credential_hash / 8: $hash-about-MobileSecurityObject /,
       / credential_hash_alg / 9: sha-256 /
     } >>,
   ]

Below a non-normative example representing a Status Assertion Request array with a single Status Assertion Request object in JWT format.

POST /status HTTP/1.1
Host: issuer.example.org
Content-Type: application/json

{
    "status_assertion_requests" : ["${base64url(json({typ: (some pop for status-assertion)+jwt, ...}))}.payload.signature", ... ]
}

The Status Assertion HTTP request can be sent to a single Credential Issuer regarding multiple Digital Credentials, and MUST contain a JSON object with the member status_assertion_requests.

The status_assertion_requests MUST be set with an array of strings, where each string within the array represents a Digital Credential Status Assertion Request object.

The Credential Issuer that receives the Status Assertion Request object MUST validate that the Wallet Instance making the request is authorized to request Status Assertions. Therefore the following requirements MUST be satisfied:

8. Status Assertion Response

The response MUST include a JSON object with a member named status_assertion_responses, which contains the Status Assertions and or the Status Assertion Errors related to the request made by the Wallet Instance. In the non-normative example below is represented an HTTP Response with the status_assertion_responses JSON member:

HTTP/1.1 200 OK
Content-Type: application/json

{
    "status_assertion_responses": ["${base64url(json({typ: status-assertion+jwt, ...}))}.payload.signature", ... ]
}

The member status_assertion_responses MUST be an array of strings, where each of them represent a Status Assertion Response object, as defined in the section Status Assertion (Section 10) or a Status Assertion Error object, as defined in the section Status Error (Section 9).

For each entry in the status_assertion_responses array, the following requirements are met: - Each element in the array MUST match the corresponding element in the request array at the same position index to which it is related, eg: [requestAboutA, requestAboutB] may produce [responseAboutA, responseErrorAboutB]. - Each element MUST contain the error or the status of the assertion, using the typ member set to "status-assertion+{jwt,cwt}" or "status-assertion-error+{jwt,cwt}", depending by the object type. - The corresponding entry in the response MUST be of the same data format as requested. For example, if the entry in the request is "jwt", then the entry at the same position in the response MUST also be "jwt". - The corresponding entry in the response MUST NOT contain any information regarding the Verifier to whom it may be presented, such as the Verifier identifier as the intended audience.

9. Status Assertion Error

If the Status Assertion is requested for a non-existent, expired, revoked or invalid Digital Credential, the Credential Issuer MUST respond with an HTTP Response with the status code set to 200 and the status_assertion_responses array with the related Status Assertion Error object.

The Status Assertion Error MUST NOT be presented or provided to a Verifier, the only audience of the Status Assertion Error is the Holder of the Credential that has requested the Status Assertion. Therefore, it is not necessary that the Status Assertion Error contains the parameter aud; if present, it MUST be set to the same value as the iss parameter used by the Wallet in the corresponding Status Assertion Request object.

Below a non-normative example of a Status Assertion Error object in JWT format, with the headers and payload represented in JSON and without applying the signature.

{
    "alg": "ES256",
    "typ": "status-assertion-error+jwt",
    "kid": "Issuer-JWK-KID"
}
.
{
    "iss": "https://issuer.example.org",
    "jti": "6f204f7e-e453-4dfd-814e-9d155319408c"
    "credential_hash": $hash-about-Issuer-Signed-JWT,
    "credential_hash_alg": "sha-256",
    "error": "credential_revoked",
    "error_description": "Credential is revoked."
    }
}

The Status Assertion Error object MUST contain the parameters described in the table below:

Table 3
Header Description Reference
typ REQUIRED. Depending on the related Status Assertion Request object format, it MUST be set to status-assertion-error+jwt or status-assertion-error+cwt. [RFC7516] Section 4.1.1
alg REQUIRED. Algorithm used to verify the cryptographic signature of the Status Assertion Error. Status Assertion Error that do not need to be signed SHOULD set the alg value to none. For further clarification about the requirement of signing the Status Assertion Errors, see Section Rationale About The Unsigned Status Assertion Errors (Section 9.1). [RFC7516] Section 4.1.1
Table 4
Payload Description Reference
iss REQUIRED. It MUST be set to the identifier of the Issuer. [RFC9126], [RFC7519]
jti REQUIRED. Unique identifier for the JWT. [RFC7519] Section 4.1.7
credential_hash REQUIRED. The hash value MUST match the one contained in the Status Assertion Request to which the Status Assertion Error is related. this specification
credential_hash_alg REQUIRED. The hash algorithm MUST match the one contained in the Status Assertion Request to which the Status Assertion Error is related. this specification
error REQUIRED. The value SHOULD be assigned with one of the error types defined in [RFC6749]Section 5.2 or defined in the Section Status Assertion Error Values. [RFC7519] Section 4.1.7
error_description OPTIONAL. Text that clarifies the nature of the error, such as attribute changes, revocation reasons, in relation to the error value. [RFC7519] Section 4.1.7

9.1. Rationale About The Unsigned Status Assertion Errors

To mitigate potential resource exhaustion attacks where an adversary could issue hundreds of fake Status Assertion Requests to force an Issuer to sign numerous Status Assertion Errors, it is advisable to set the header parameteralg value to none for Status Assertion Errors that do not require signatures. This approach conserves computational resources and prevents abuse, especially in scenarios where the Issuer's implementation could be vulnerable to resource exhaustion attacks. However, even if it is out of the scopes of this specification determine in which the Status Error Assertion signatures are necessary, when the Issuer signs the Status Assertion Errors the Client that received them MUST validate the signature.

9.2. Status Assertion Error Values

The error parameter for the Status Assertion Error object MUST be set with one of the values defined in the table below, in addition to the values specified in [RFC6749]:

Table 5
Error Parameter Value Description Reference
credential_revoked The Digital Credential results as already revoked. The reason of revocation MAY be provided in the error_description field. this specification
credential_updated One or more information contained in the Digital Credential are changed. The error_description field SHOULD contain a human-readable text describing the general parameters updated without specifying each one. this specification
credential_invalid The Digital Credential is invalid. The error_description field SHOULD contain the reason of invalidation. this specification
invalid_request_signature The Status Assertion Request signature validation has failed. This error type is used when the proof of possession of the Digital Credential is found not valid within the Status Assertion Request. this specification
credential_not_found The credential_hash value provided in the Status Assertion Request doesn't match with any active Digital Credential. this specification
unsupported_hash_alg The hash algorithm set in credential_hash_alg is not supported. this specification

10. Status Assertion

When a Status Assertion is requested to a Credential Issuer, the Issuer checks the status of the Digital Credential and creates a Status Assertion bound to it.

If the Digital Credential is valid, the Credential Issuer creates a new Status Assertion, which a non-normative example is given below where the format is JWT.

{
    "alg": "ES256",
    "typ": "status-assertion+jwt",
    "kid": $ISSUER-JWKID
}
.
{
    "iss": "https://issuer.example.org",
    "iat": 1504699136,
    "exp": 1504785536,
    "credential_hash": $hash-about-Issuer-Signed-JWT,
    "credential_hash_alg": "sha-256",
    "cnf": {
        "jwk": {...}
    }
}

The Status Assertion MUST contain the parameters defined below.

Table 6
Header Parameter Name Description Reference
alg A digital signature algorithm identifier such as per IANA "JSON Web Signature and Encryption Algorithms" registry. It MUST NOT be set to none or to a symmetric algorithm (MAC) identifier. [RFC7515], [RFC7517]
typ It MUST be set to status-assertion+jwt when JWT format is used. It MUST be set to status-assertion+cwt when CWT format is used. [RFC7515], [RFC7517] and this specification
kid Unique identifier of the Credential Issuer JWK. It is required when x5c or other cryptographic public key resolution identifiers are not used. [RFC7515]
x5c X.509 certificate chain about the Credential Issuer. It is required when kid or other parameter are not used. [RFC7515]
Table 7
Payload Parameter Name Description Reference
iss It MUST be set to the identifier of the Issuer. [RFC9126], [RFC7519]
iat UNIX Timestamp with the time of the Status Assertion issuance. [RFC9126], [RFC7519]
exp UNIX Timestamp with the expiration time of the JWT. It MUST be greater than the value set for iat. [RFC9126], [RFC7519], [RFC7515]
credential_hash Hash value of the Digital Credential the Status Assertion is bound to. this specification
credential_hash_alg The Algorithm used of hashing the Digital Credential to which the Status Assertion is bound. The value SHOULD be set to sha-256. this specification
cnf JSON object containing confirmation methods. The sub-member contained within cnf member, such as jwk for JWT and Cose_Key for CWT, MUST match with the one provided within the related Digital Credential. Other confirmation methods can be utilized when the referenced Digital Credential supports them, in accordance with the relevant standards. [RFC7800] Section 3.1, [RFC8747] Section 3.1

11. Interoperability of Credential Issuers Supporting Status Assertions

This section outlines how Credential Issuers support Status Assertions, detailing the necessary metadata and practices to integrate into their systems.

11.1. Credential Issuer Metadata

The Credential Issuers that uses the Status Assertions MUST include in their OpenID4VCI [OpenID4VCI] metadata the claims:

  • status_assertion_endpoint. REQUIRED. It MUST be an HTTPs URL indicating the endpoint where the Wallet Instances can request Status Assertions.

  • credential_hash_alg_supported. REQUIRED. The supported Algorithm used by the Wallet Instance to hash the Digital Credential for which the Status Assertion is requested, using one of the hash algorithms listed in the [IANA-HASH-REG].

11.2. Issued Digital Credentials

The Credential Issuers that uses the Status Assertions SHOULD include in the issued Digital Credentials the object status with the JSON member status_assertion set to a JSON Object containing the following member:

  • credential_hash_alg. REQUIRED. The Algorithm used of hashing the Digital Credential to which the Status Assertion is bound, using one of the hash algorithms listed in the [IANA-HASH-REG]. Among the hash algorithms, sha-256 is recommended and SHOULD be implemented by all systems.

The non-normative example of an unsecured payload of an [SD-JWT.VC] is shown below.

{
 "vct": "https://credentials.example.com/identity_credential",
 "given_name": "John",
 "family_name": "Doe",
 "email": "johndoe@example.com",
 "phone_number": "+1-202-555-0101",
 "address": {
   "street_address": "123 Main St",
   "locality": "Anytown",
   "region": "Anystate",
   "country": "US"
 },
 "birthdate": "1940-01-01",
 "is_over_18": true,
 "is_over_21": true,
 "is_over_65": true,
 "status": {
    "status_assertion": {
        "credential_hash_alg": "sha-256",
    }
 }
}

11.2.1. Credential Issuer Implementation Considerations

When the Digital Credential is issued, the Credential Issuer should calculate the hash value using the algorithm specified in status.status_assertion.credential_hash_alg and store this information in its database. This practice enhances efficiency by allowing the Credential Issuer to quickly compare the requested credential_hash with the pre-calculated one, when processing Status Assertion requests made by Holders.

12. Presenting Status Assertions

The Wallet Instance that provides the Status Assertions using [OpenID4VP], SHOULD include in the vp_token JSON array, as defined in [OpenID4VP], the Status Assertion along with the related Digital Credential.

The Verifier that receives a Digital Credential supporting the Status Assertion, SHOULD:

13. Considerations On Revocation Verification

The recommendation for Verifiers to check the revocation status of Digital Credentials as a 'SHOULD' instead of a 'MUST' acknowledges that the decision to verify revocation is not absolute and may be influenced by various factors. Consider as an example the case of age-over x; even if it has expired, it may still perform its intended purpose. As a result, the expiration status alone does not render it invalid. The adaptability recognizes that the need to verify revocation status may not always coincide with the actual usability of a Digital Credential, allowing Verifiers to examine and make educated conclusions based on a variety of scenarios.

14. Security Considerations

TODO Security

15. Privacy Considerations

In the design and implementation of Status Assertions, particular attention has been paid to privacy considerations to ensure that the system is respectful of user privacy and compliant with relevant regulations.

15.1. Privacy Consideration: Status Assertion Request Opacity

The request for a Status Assertion does not transmit the Digital Credential for which the status is being attested. Instead, it includes a proof of possession (PoP) of the Digital Credential that is only interpretable by the Credential Issuer who issued the Digital Credential for which the Status Assertion is requested. This PoP can be achieved through a cryptographic signature using the public key contained within the Digital Credential over the request. This method is essential for preventing the potential for fraudulent requests intended to mislead or disclose sensitive information to unintended parties. By separating the Digital Credential from the Status Assertion Request, the system ensures that the request does not inadvertently disclose any information about the Digital Credential or its Holder. This strategy significantly enhances the privacy and security of the system by preventing the assertion process from being used to collect information about Digital Credentials or their Holders through deceptive requests.

15.2. Privacy Consideration: Opacity of Status Assertion Content

An important privacy consideration is how the Status Assertion is structured to ensure it does not reveal any information about the User or the Holder of the Digital Credential. The Status Assertion is crafted to prove only the vital information needed to verify the current state of a Digital Credential, moving beyond simple revocation or suspension checks. This is done by focusing the assertion content on the Digital Credential's present condition and the method for its verification, rather than on the identity of the Digital Credential's Holder. This approach is key in keeping the User's anonymity intact, making sure that the Status Assertion can be applied in various verification situations without risking the privacy of the people involved.

15.3. Unlinkability and Reusability of Status Assertions

Status Assertions are designed to uphold privacy by allowing Verifiers to operate independently, without the need for interaction or information disclosure to third-party entities or other Verifiers. This design is pivotal in ensuring unlinkability between Verifiers, where actions taken by one Verifier cannot be correlated or linked to actions taken by another. Verifiers can directly validate the status of a Digital Credential through the Status Assertion, eliminating the need for external communication. This mechanism is key in protecting the privacy of individuals whose Digital Credentials are being verified, as it significantly reduces the risk of tracking or profiling based on verification activities across various services.

While Status Assertions facilitate unlinkability, they are not inherently "single use." The specification accommodates the batch issuance of multiple Status Assertions, which can be single-use. However, particularly for offline interactions, a Single Assertion may be utilized by numerous Verifiers. This flexibility ensures that Status Assertions can support a wide range of verification scenarios, from one-time validations to repeated checks by different entities, without compromising the privacy or security of the Digital Credential Holder.

15.4. Untrackability by Digital Credential Issuers and the "Phone Home" Problem

A fundamental aspect of the privacy-preserving attributes of Status Assertions is their ability to address the "phone home" problem, which is the prevention of tracking by Digital Credential Issuers. Traditional models often require Verifiers to query a central status list or contact the issuer directly, a process that can inadvertently allow Credential Issuers to track when and where a Digital Credential is verified. Status Assertions, however, encapsulate all necessary verification information within the assertion itself. This design choice ensures that Credential Issuers are unable to monitor the verification activities of their issued Digital Credentials, thereby significantly enhancing the privacy of the Holder. By removing the need for real-time communication with the Issuer for status checks, Status Assertions effectively prevent the Issuer from tracking verification activities, further reinforcing the system's dedication to protecting User privacy.

15.5. Minimization of Data Exposure

The Status Assertions are designed around the data minimization principle. Data minimization ensures that only the necessary information required for the scope of attesting the non revocation status of the Digital Credential. This minimizes the exposure of potentially sensitive data.

15.6. Resistance to Enumeration Attacks

The design of Status Assertions incorporates measures to resist enumeration attacks, where an adversary attempts to gather information by systematically verifying different combinations of data. By implementing robust cryptographic techniques and limiting the information contained in Status Assertions, the system reduces the feasibility of such attacks. This consideration is vital for safeguarding the privacy of the Holders and for ensuring the integrity of the verification process.

Status Assertions are based on a privacy-by-design approach, reflecting a deliberate effort to balance security and privacy needs in the Digital Credential ecosystem.

16. IANA Considerations

16.1. JSON Web Token Claims Registration

This specification requests registration of the following Claims in the IANA "JSON Web Token Claims" registry [IANA.JWT] established by [RFC7519].

  • Claim Name: credential_hash

  • Claim Description: Hash value of the Digital Credential the Status Assertion is bound to.

  • Change Controller: IETF

  • Specification Document(s): this specification (Section 10)


  • Claim Name: credential_hash_alg

  • Claim Description: The Algorithm used of hashing the Digital Credential to which the Status Assertion is bound.

  • Change Controller: IETF

  • Specification Document(s): this specification (Section 10)

16.2. Media Type Registration

This section requests registration of the following media types [RFC2046] in the "Media Types" registry [IANA.MediaTypes] in the manner described in [RFC6838].

To indicate that the content is a JWT-based Status Assertion:

  • Type name: application

  • Subtype name: status-assertion-request+jwt

  • Required parameters: n/a

  • Optional parameters: n/a

  • Encoding considerations: binary; A JWT-based Status Assertion Request object is a JWT; JWT values are encoded as a series of base64url-encoded values (some of which may be the empty string) separated by period ('.') characters.

  • Security considerations: See (#Security) of this specification (Section 14)

  • Interoperability considerations: n/a

  • Published specification: this specification

  • Applications that use this media type: Applications using this specification for requesting Status Assertions.

  • Fragment identifier considerations: n/a

  • Additional information:

    • File extension(s): n/a

    • Macintosh file type code(s): n/a

  • Person & email address to contact for further information: Giuseppe De Marco, gi.demarco@innovazione.gov.it

  • Intended usage: COMMON

  • Restrictions on usage: none

  • Author: Giuseppe De Marco, gi.demarco@innovazione.gov.it

  • Change controller: IETF

  • Provisional registration? No

To indicate that the content is a CWT-based Status Assertion Request:

  • Type name: application

  • Subtype name: status-assertion-request+cwt

  • Required parameters: n/a

  • Optional parameters: n/a

  • Encoding considerations: binary

  • Security considerations: See (#Security) of this specification (Section 14)

  • Interoperability considerations: n/a

  • Published specification: this specification

  • Applications that use this media type: Applications using this specification for requesting Status Assertions.

  • Fragment identifier considerations: n/a

  • Additional information:

    • File extension(s): n/a

    • Macintosh file type code(s): n/a

  • Person & email address to contact for further information: Giuseppe De Marco, gi.demarco@innovazione.gov.it

  • Intended usage: COMMON

  • Restrictions on usage: none

  • Author: Giuseppe De Marco, gi.demarco@innovazione.gov.it

  • Change controller: IETF

  • Provisional registration? No

To indicate that the content is a JWT-based Status Assertion:

  • Type name: application

  • Subtype name: status-assertion+jwt

  • Required parameters: n/a

  • Optional parameters: n/a

  • Encoding considerations: binary

  • Security considerations: See (#Security) of this specification (Section 14)

  • Interoperability considerations: n/a

  • Published specification: this specification

  • Applications that use this media type: Applications using this specification for issuing or presenting Status Assertions.

  • Fragment identifier considerations: n/a

  • Additional information:

    • File extension(s): n/a

    • Macintosh file type code(s): n/a

  • Person & email address to contact for further information: Giuseppe De Marco, gi.demarco@innovazione.gov.it

  • Intended usage: COMMON

  • Restrictions on usage: none

  • Author: Giuseppe De Marco, gi.demarco@innovazione.gov.it

  • Change controller: IETF

  • Provisional registration? No

To indicate that the content is a CWT-based Status Assertion:

  • Type name: application

  • Subtype name: status-assertion+cwt

  • Required parameters: n/a

  • Optional parameters: n/a

  • Encoding considerations: binary

  • Security considerations: See (#Security) of this specification (Section 14)

  • Interoperability considerations: n/a

  • Published specification: this specification

  • Applications that use this media type: Applications using this specification for issuing or presenting Status Assertions.

  • Fragment identifier considerations: n/a

  • Additional information:

    • File extension(s): n/a

    • Macintosh file type code(s): n/a

  • Person & email address to contact for further information: Giuseppe De Marco, gi.demarco@innovazione.gov.it

  • Intended usage: COMMON

  • Restrictions on usage: none

  • Author: Giuseppe De Marco, gi.demarco@innovazione.gov.it

  • Change controller: IETF

  • Provisional registration? No

To indicate that the content is a JWT-based Status Assertion Error:

  • Type name: application

  • Subtype name: status-assertion-error+jwt

  • Required parameters: n/a

  • Optional parameters: n/a

  • Encoding considerations: binary

  • Security considerations: See (#Security) of this specification (Section 14)

  • Interoperability considerations: n/a

  • Published specification: this specification

  • Applications that use this media type: Applications using this specification for issuing Status Assertions Request Errors.

  • Fragment identifier considerations: n/a

  • Additional information:

    • File extension(s): n/a

    • Macintosh file type code(s): n/a

  • Person & email address to contact for further information: Giuseppe De Marco, gi.demarco@innovazione.gov.it

  • Intended usage: COMMON

  • Restrictions on usage: none

  • Author: Giuseppe De Marco, gi.demarco@innovazione.gov.it

  • Change controller: IETF

  • Provisional registration? No

To indicate that the content is a CWT-based Status Assertion Error:

  • Type name: application

  • Subtype name: status-assertion-error+cwt

  • Required parameters: n/a

  • Optional parameters: n/a

  • Encoding considerations: binary

  • Security considerations: See (#Security) of this specification (Section 14)

  • Interoperability considerations: n/a

  • Published specification: this specification

  • Applications that use this media type: Applications using this specification for issuing Status Assertions Request Errors.

  • Fragment identifier considerations: n/a

  • Additional information:

    • File extension(s): n/a

    • Macintosh file type code(s): n/a

  • Person & email address to contact for further information: Giuseppe De Marco, gi.demarco@innovazione.gov.it

  • Intended usage: COMMON

  • Restrictions on usage: none

  • Author: Giuseppe De Marco, gi.demarco@innovazione.gov.it

  • Change controller: IETF

  • Provisional registration? No

17. References

17.1. Normative References

[IANA-HASH-REG]
"IANA - Named Information Hash Algorithm Registry", n.d., <https://www.iana.org/assignments/named-information/named-information.xhtml#hash-alg>.
[IANA.CWT]
IANA, "CBOR Web Token (CWT) Claims", n.d., <https://www.iana.org/assignments/cwt/cwt.xhtml>.
[IANA.JOSE]
IANA, "JSON Object Signing and Encryption (JOSE)", n.d., <https://www.iana.org/assignments/jose/jose.xhtml>.
[IANA.JWT]
IANA, "JSON Web Token Claims", n.d., <https://www.iana.org/assignments/jwt/jwt.xhtml>.
[IANA.MediaTypes]
IANA, "Media Types", n.d., <https://www.iana.org/assignments/media-types/media-types.xhtml>.
[OpenID.Core]
IANA, "Media Types", n.d., <https://www.iana.org/assignments/media-types/media-types.xhtml>.
[OpenID4VCI]
OpenID Foundation, "OpenID for Verifiable Credential Issuance", n.d., <https://openid.net/specs/openid-4-verifiable-credential-issuance-1_0.html>.
[RFC2046]
Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, DOI 10.17487/RFC2046, , <https://www.rfc-editor.org/rfc/rfc2046>.
[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/rfc/rfc2119>.
[RFC6749]
Hardt, D., Ed., "The OAuth 2.0 Authorization Framework", RFC 6749, DOI 10.17487/RFC6749, , <https://www.rfc-editor.org/rfc/rfc6749>.
[RFC6838]
Freed, N., Klensin, J., and T. Hansen, "Media Type Specifications and Registration Procedures", BCP 13, RFC 6838, DOI 10.17487/RFC6838, , <https://www.rfc-editor.org/rfc/rfc6838>.
[RFC7515]
Jones, M., Bradley, J., and N. Sakimura, "JSON Web Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, , <https://www.rfc-editor.org/rfc/rfc7515>.
[RFC7516]
Jones, M. and J. Hildebrand, "JSON Web Encryption (JWE)", RFC 7516, DOI 10.17487/RFC7516, , <https://www.rfc-editor.org/rfc/rfc7516>.
[RFC7517]
Jones, M., "JSON Web Key (JWK)", RFC 7517, DOI 10.17487/RFC7517, , <https://www.rfc-editor.org/rfc/rfc7517>.
[RFC7519]
Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token (JWT)", RFC 7519, DOI 10.17487/RFC7519, , <https://www.rfc-editor.org/rfc/rfc7519>.
[RFC7800]
Jones, M., Bradley, J., and H. Tschofenig, "Proof-of-Possession Key Semantics for JSON Web Tokens (JWTs)", RFC 7800, DOI 10.17487/RFC7800, , <https://www.rfc-editor.org/rfc/rfc7800>.
[RFC8152]
Schaad, J., "CBOR Object Signing and Encryption (COSE)", RFC 8152, DOI 10.17487/RFC8152, , <https://www.rfc-editor.org/rfc/rfc8152>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/rfc/rfc8174>.
[RFC8392]
Jones, M., Wahlstroem, E., Erdtman, S., and H. Tschofenig, "CBOR Web Token (CWT)", RFC 8392, DOI 10.17487/RFC8392, , <https://www.rfc-editor.org/rfc/rfc8392>.
[RFC8747]
Jones, M., Seitz, L., Selander, G., Erdtman, S., and H. Tschofenig, "Proof-of-Possession Key Semantics for CBOR Web Tokens (CWTs)", RFC 8747, DOI 10.17487/RFC8747, , <https://www.rfc-editor.org/rfc/rfc8747>.
[RFC9126]
Lodderstedt, T., Campbell, B., Sakimura, N., Tonge, D., and F. Skokan, "OAuth 2.0 Pushed Authorization Requests", RFC 9126, DOI 10.17487/RFC9126, , <https://www.rfc-editor.org/rfc/rfc9126>.
[RFC9596]
Jones, M.B. and O. Steele, "CBOR Object Signing and Encryption (COSE) "typ" (type) Header Parameter", RFC 9596, DOI 10.17487/RFC9596, , <https://www.rfc-editor.org/rfc/rfc9596>.

17.2. Informative References

[draft-ietf-oauth-status-list]
"draft-ietf-oauth-status-list", n.d., <https://datatracker.ietf.org/doc/draft-ietf-oauth-status-list>.
[ECHR-ART8]
"Article 8 of the European Convention on Human Rights", n.d., <https://www.echr.coe.int/documents/convention_eng.pdf>.
[GDPR]
"GDPR", n.d., <https://gdpr-info.eu/>.
[ISO.mdoc]
ISO/IEC JTC 1/SC 17, "ISO/IEC 18013-5:2021 ISO-compliant driving licence", n.d..
[OpenID4VP]
OpenID Foundation, "OpenID for Verifiable Credential Presentation", n.d., <https://openid.net/specs/openid-4-verifiable-presentations-1_0.html>.
[RFC6066]
"Transport Layer Security (TLS) Extensions: Extension Definitions", n.d., <https://datatracker.ietf.org/doc/html/rfc6066>.
[SD-JWT.VC]
Terbu, O., Fett, D., and B. Campbell, "SD-JWT-based Verifiable Credentials (SD-JWT VC)", Work in Progress, Internet-Draft, draft-ietf-oauth-sd-jwt-vc-03, , <https://datatracker.ietf.org/doc/html/draft-ietf-oauth-sd-jwt-vc-03>.

Appendix A. Acknowledgments

We would like to thank:

Appendix B. Document History

-02

Authors' Addresses

Giuseppe De Marco
Dipartimento per la trasformazione digitale
Orie Steele
Transmute
Francesco Marino
Istituto Poligrafico e Zecca dello Stato