Network Working Group N.B. Sopher Internet-Draft O. Finkelman Obsoletes: 8007 (if approved) Qwilt Intended status: Standards Track S. Mishra Expires: 9 December 2024 Verizon J.K. Robertson Qwilt 7 June 2024 Content Delivery Network Interconnection (CDNI) Control Interface / Triggers 2nd Edition draft-ietf-cdni-ci-triggers-rfc8007bis-12 Abstract This document obsoletes RFC8007. The document describes the part of Content Delivery Network Interconnection (CDNI) Control interface that allows a CDN to trigger activity in an interconnected CDN that is configured to deliver content on its behalf. The upstream CDN MAY use this mechanism to request that the downstream CDN pre-position metadata or content as well as request that it invalidate or purge metadata or content. The upstream CDN MAY monitor the status of activity that it has triggered in the downstream CDN. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 9 December 2024. Copyright Notice Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved. Sopher, et al. Expires 9 December 2024 [Page 1] Internet-Draft CDN Interconnect Triggers June 2024 This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 5 2. Model for CDNI Triggers . . . . . . . . . . . . . . . . . . . 5 2.1. Timing of Triggered Activity . . . . . . . . . . . . . . 8 2.2. Scope of Triggered Activity . . . . . . . . . . . . . . . 8 2.2.1. Multiple Interconnected CDNs . . . . . . . . . . . . 9 2.3. Trigger Results . . . . . . . . . . . . . . . . . . . . . 10 3. Trigger Specification . . . . . . . . . . . . . . . . . . . . 10 3.1. Trigger Action . . . . . . . . . . . . . . . . . . . . . 10 3.2. Trigger Spec . . . . . . . . . . . . . . . . . . . . . . 11 3.2.1. Trigger Subject . . . . . . . . . . . . . . . . . . . 12 3.2.2. Content URLs . . . . . . . . . . . . . . . . . . . . 13 3.3. Trigger Extensibility . . . . . . . . . . . . . . . . . . 13 4. Collections of Trigger Status Resources . . . . . . . . . . . 14 5. CDNI Trigger Interface . . . . . . . . . . . . . . . . . . . 15 5.1. Creating Triggers . . . . . . . . . . . . . . . . . . . . 16 5.2. Checking Status . . . . . . . . . . . . . . . . . . . . . 17 5.2.1. Polling Trigger Status Resource Collections . . . . . 18 5.2.2. Polling Trigger Status Resources . . . . . . . . . . 18 5.3. Cancelling Triggers . . . . . . . . . . . . . . . . . . . 18 5.4. Deleting Triggers . . . . . . . . . . . . . . . . . . . . 19 5.5. Expiry of Trigger Status Resources . . . . . . . . . . . 20 5.6. Loop Detection and Prevention . . . . . . . . . . . . . . 20 5.7. Error Handling . . . . . . . . . . . . . . . . . . . . . 21 5.7.1. Error propagation . . . . . . . . . . . . . . . . . . 22 6. CI/T Object Properties and Encoding . . . . . . . . . . . . . 25 6.1. CI/T Objects . . . . . . . . . . . . . . . . . . . . . . 25 6.1.1. CI/T Trigger Command . . . . . . . . . . . . . . . . 25 6.1.2. CI/T Cancel Command . . . . . . . . . . . . . . . . . 26 6.1.3. Trigger Status Resources . . . . . . . . . . . . . . 26 6.1.4. Trigger Collections . . . . . . . . . . . . . . . . . 27 6.2. Properties of CI/T Objects . . . . . . . . . . . . . . . 30 6.2.1. Trigger.v2 Specification . . . . . . . . . . . . . . 30 6.2.2. Generic Trigger Specs . . . . . . . . . . . . . . . . 31 6.2.3. CI/T Trigger Extensions . . . . . . . . . . . . . . . 32 6.2.4. Absolute Time . . . . . . . . . . . . . . . . . . . . 37 6.2.5. Error.v2 Description . . . . . . . . . . . . . . . . 37 Sopher, et al. Expires 9 December 2024 [Page 2] Internet-Draft CDN Interconnect Triggers June 2024 6.2.6. Trigger Status . . . . . . . . . . . . . . . . . . . 39 6.2.7. Error Code . . . . . . . . . . . . . . . . . . . . . 41 7. Trigger Spec Objects . . . . . . . . . . . . . . . . . . . . 42 7.1. URLs Spec . . . . . . . . . . . . . . . . . . . . . . . . 42 7.2. CCIDs Spec . . . . . . . . . . . . . . . . . . . . . . . 43 7.3. URI Pattern Match Spec . . . . . . . . . . . . . . . . . 43 7.3.1. UriPatternMatch . . . . . . . . . . . . . . . . . . . 43 7.4. URI Regex Match Spec . . . . . . . . . . . . . . . . . . 44 7.4.1. RegexMatch . . . . . . . . . . . . . . . . . . . . . 45 7.5. Content Playlist Spec . . . . . . . . . . . . . . . . . . 46 7.5.1. Playlist . . . . . . . . . . . . . . . . . . . . . . 46 7.5.2. MediaProtocol . . . . . . . . . . . . . . . . . . . . 47 8. Trigger Extension Objects . . . . . . . . . . . . . . . . . . 48 8.1. LocationPolicy extension . . . . . . . . . . . . . . . . 48 8.2. TimePolicy Extension . . . . . . . . . . . . . . . . . . 50 8.2.1. UTCWindow . . . . . . . . . . . . . . . . . . . . . . 51 9. Footprint and Capabilities . . . . . . . . . . . . . . . . . 52 9.1. CI/T Objects Versions Capability Object . . . . . . . . . 52 9.1.1. CI/T Objects Versions Capability Object Serialization . . . . . . . . . . . . . . . . . . . . 53 9.2. CI/T Trigger Scope Capability Object . . . . . . . . . . 53 9.2.1. CI/T Trigger Scope Capability Object Serialization . 54 9.3. CI/T Playlist Protocol Capability Object . . . . . . . . 55 9.3.1. CI/T Playlist Protocol Capability Object Serialization . . . . . . . . . . . . . . . . . . . . 56 10. Examples . . . . . . . . . . . . . . . . . . . . . . . . . . 56 10.1. Creating Triggers . . . . . . . . . . . . . . . . . . . 56 10.1.1. Preposition . . . . . . . . . . . . . . . . . . . . 56 10.1.2. Invalidate . . . . . . . . . . . . . . . . . . . . . 58 10.1.3. Invalidation with Regex . . . . . . . . . . . . . . 60 10.1.4. Preposition with Playlists . . . . . . . . . . . . . 62 10.2. Examining Trigger Status . . . . . . . . . . . . . . . . 63 10.2.1. Collection of All Triggers . . . . . . . . . . . . . 63 10.2.2. Filtered Collections of Trigger Status Resources . . 64 10.2.3. Individual Trigger Status Resources . . . . . . . . 66 10.2.4. Polling for Changes in Status . . . . . . . . . . . 68 10.2.5. Deleting Trigger Status Resources . . . . . . . . . 71 10.2.6. Extensions with Error Propagation . . . . . . . . . 72 11. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 75 11.1. CDNI Payload Type Parameter Registrations . . . . . . . 75 11.1.1. CDNI ci-trigger-command.trigger.v2 Payload Type . . 76 11.1.2. CDNI ci-trigger-command.cancel Payload Type . . . . 76 11.1.3. CDNI ci-trigger-status.v2 Payload Type . . . . . . . 76 11.1.4. CDNI FCI CI/T Payload Types . . . . . . . . . . . . 77 11.2. "CDNI CI/T Trigger Types" Registry For Trigger Actions . . . . . . . . . . . . . . . . . . . . . . . . 77 11.3. "CDNI CI/T Trigger Specs" Registry . . . . . . . . . . . 78 11.4. "CDNI CI/T Trigger Subjects" Registry . . . . . . . . . 78 Sopher, et al. Expires 9 December 2024 [Page 3] Internet-Draft CDN Interconnect Triggers June 2024 11.5. CDNI CI/T Playlist Spec MediaProtocols . . . . . . . . . 78 11.6. "CDNI CI/T Trigger Extensions" Registry . . . . . . . . 79 11.7. "CDNI CI/T Error Codes" Registry . . . . . . . . . . . . 79 12. Security Considerations . . . . . . . . . . . . . . . . . . . 79 12.1. Authentication, Authorization, Confidentiality, Integrity Protection . . . . . . . . . . . . . . . . . . . . . . . 80 12.2. Denial of Service . . . . . . . . . . . . . . . . . . . 81 12.3. Privacy . . . . . . . . . . . . . . . . . . . . . . . . 81 13. References . . . . . . . . . . . . . . . . . . . . . . . . . 82 13.1. Normative References . . . . . . . . . . . . . . . . . . 82 13.2. Informative References . . . . . . . . . . . . . . . . . 83 Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . 84 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 84 1. Introduction [RFC6707] introduces the problem scope for Content Delivery Network Interconnection (CDNI) and lists the four categories of interfaces that may be used to compose a CDNI solution (Control, Metadata, Request Routing, and Logging). [RFC7336] expands on the information provided in [RFC6707] and describes each of the interfaces and the relationships between them in more detail. The CDNI Control Interface / Triggers 1st edition [RFC8007], deprecated by this document, describes the "CI/T" interface -- "CDNI Control interface / Triggers". It does not consider those parts of the Control interface that relate to configuration, bootstrapping, or authentication of CDN Interconnect interfaces. Section 4 of [RFC7337] identifies the requirements specific to the CI/T interface; requirements applicable to the CI/T interface are CI-1 to CI-6. This document is a second edition for the CDNI Control Interface / Triggers, which define a new version, "v2", of the interface objects. The new objects replace the trigger interface's main objects, the "ci-trigger-command" object and its matching "ci-trigger-status" object, and improve the interface's flexibility and extensibility. The document also provides a Trigger Extension mechanism that MAY be used to provide further instruction on the trigger execution. Additionally, this second edition includes cascaded CDN error propagation for improved trigger execution monitoring. Note that the trigger interface mechanism itself is not changed by this new edition. * Section 2 outlines the model for the CI/T interface at a high level. Sopher, et al. Expires 9 December 2024 [Page 4] Internet-Draft CDN Interconnect Triggers June 2024 * Section 3 describes the trigger attributes used for specifying the trigger's targets and for controlling the trigger's execution. * Section 4 describes collections of Trigger Status Resources. * Section 5 defines the web service provided by the downstream CDN. * Section 6 lists properties of CI/T Commands and Status Resources. * Section 7 describes the Trigger's Spec object. * Section 8 describes the Trigger's Extensions object. * Section 9 describes the FCI capabilities objects used to inform on the supported CI/T related capabilities. * Section 10 contains example messages. 1.1. Terminology This document reuses the terminology defined in [RFC6707] and uses "uCDN" and "dCDN" as shorthand for "upstream CDN" and "downstream CDN", respectively. Additionally, the following terms are used throughout this document and are defined as follows: * HLS - HTTP Live Streaming * DASH - Dynamic Adaptive Streaming Over HTTP * MSS - Microsoft Smooth Streaming The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 2. Model for CDNI Triggers A CI/T Command, sent from the uCDN to the dCDN, is a request for the dCDN to do some work (an "action") relating to data associated with content requests originating from the uCDN. There are two types of CI/T Commands: CI/T Trigger Commands and CI/T Cancel Commands. The CI/T Cancel Command can be used to request cancellation of an earlier CI/T Trigger Command. Sopher, et al. Expires 9 December 2024 [Page 5] Internet-Draft CDN Interconnect Triggers June 2024 A CI/T Trigger Action is of one of the following: * preposition - used to instruct the dCDN to fetch metadata from the uCDN or content from any origin including the uCDN. * invalidate - used to instruct the dCDN to revalidate specific metadata or content before reusing it. * purge - used to instruct the dCDN to delete specific metadata or content. Note that additional CI/T Trigger Actions can be defined and registered in the future. The CI/T interface is a web service offered by the dCDN. It allows CI/T Commands to be issued and allows triggered activity to be tracked. The CI/T interface builds on top of HTTP/1.1 [RFC9112]. References to URL in this document relate to HTTP/HTTPS URIs, as defined in Section 4.2 of [RFC9110]. When the dCDN accepts a CI/T Command, it creates a resource describing the status of the triggered activity -- a Trigger Status Resource. The uCDN can poll Trigger Status Resources to monitor progress. The dCDN maintains at least one collection of Trigger Status Resources for each uCDN. Each uCDN only has access to its own collections, the locations of which are shared when CDNI is established. To trigger activity in the dCDN, the uCDN POSTs a CI/T Command to the collection of Trigger Status Resources. If the dCDN accepts the CI/T Command, it creates a new Trigger Status Resource and returns its location to the uCDN. To monitor progress, the uCDN can GET the Trigger Status Resource. To request cancellation of a CI/T Trigger Command, the uCDN can POST to the collection of Trigger Status Resources or simply DELETE the Trigger Status Resource. Note that the CI/T Command objects POSTed by the uCDN, and CI/T Status Resource objects generated and reported by the dCDN, are matched by their version, i.e., sending a [RFC8007] "ci-trigger- command" object as the command generates a "ci-trigger-status" structured resource to be reported, while sending a "ci-trigger- command.trigger.v2" object generates a "ci-trigger-status.v2" object. In addition to the collection of all Trigger Status Resources for the uCDN, the dCDN can maintain filtered views of that collection. These filtered views are defined in Section 4 and include collections of Sopher, et al. Expires 9 December 2024 [Page 6] Internet-Draft CDN Interconnect Triggers June 2024 Trigger Status Resources corresponding to active and completed CI/T Trigger Commands. These collections provide a mechanism for polling the status of multiple jobs. Figure 1 is an example showing the basic message flow used by the uCDN to trigger activity in the dCDN and for the uCDN to discover the status of that activity. Only successful triggering is shown. Examples of the messages are shown in Section 10. uCDN dCDN | (1) POST https://dcdn.example.com/triggers/uCDN | [ ] --------------------------------------------------> [ ]--+ | [ ] | (2) | (3) HTTP 201 Response [ ]<-+ [ ] <-------------------------------------------------- [ ] | Loc: https://dcdn.example.com/triggers/uCDN/123 | | | . . . . . . . . . | | | (4) GET https://dcdn.example.com/triggers/uCDN/123 | [ ] --------------------------------------------------> [ ] | [ ] | (5) HTTP 200 Trigger Status Resource [ ] [ ] <-------------------------------------------------- [ ] | | | | Figure 1: Basic CDNI Message Flow for Triggers The steps in Figure 1 are as follows: 1. The uCDN triggers action in the dCDN by POSTing a CI/T Command to a collection of Trigger Status Resources -- "https://dcdn.example.com/triggers/uCDN". This URL was given to the uCDN when the CI/T interface was established. 2. The dCDN authenticates the request, validates the CI/T Command, and, if it accepts the request, creates a new Trigger Status Resource. 3. The dCDN responds to the uCDN with an HTTP 201 response status and the location of the Trigger Status Resource. 4. The uCDN MAY query, possibly repeatedly, the Trigger Status Resource in the dCDN. Sopher, et al. Expires 9 December 2024 [Page 7] Internet-Draft CDN Interconnect Triggers June 2024 5. The dCDN responds to each query with the Trigger Status Resource, describing the progress or results of the CI/T Trigger Command. The remainder of this document describes the messages, Trigger Status Resources, and collections of Trigger Status Resources in more detail. 2.1. Timing of Triggered Activity Timing of the execution of CI/T Commands is under the dCDN's control, including its start time and pacing of the activity in the network. Instructions regarding this timing may be included in the trigger using one of the Trigger Extension Objects defined in Section 8. CI/T "invalidate" and "purge" commands MUST be applied to all data acquired before the command was accepted by the dCDN. The dCDN SHOULD NOT apply CI/T "invalidate" and "purge" commands to data acquired after the CI/T Command was accepted, but this may not always be achievable, so the uCDN cannot count on that. If the uCDN wishes to invalidate or purge content and then immediately pre-position replacement content at the same URLs, it SHOULD ensure that the dCDN has completed the invalidate/purge before initiating the pre-positioning. Otherwise, there is a risk that the dCDN pre-positions the new content, then immediately invalidates or purges it (as a result of the two uCDN requests running in parallel). Because the CI/T Command timing is under the dCDN's control, the dCDN implementation can choose whether to apply CI/T "invalidate" and "purge" commands to content acquisition that has already started when the command is received. 2.2. Scope of Triggered Activity Each CI/T Command can operate on multiple metadata and content elements, usually referred to by their URLs. These elements are targeted by specifying both their subject (i.e., "metadata" or "content") as well as specification method (e.g., URL Regexes) and value. Multiple representations of an HTTP resource may share the same URL. CI/T Trigger Commands that invalidate or purge metadata or content apply to all resource representations with matching URLs. Sopher, et al. Expires 9 December 2024 [Page 8] Internet-Draft CDN Interconnect Triggers June 2024 2.2.1. Multiple Interconnected CDNs In a network of interconnected CDNs, a single uCDN will originate a given item of metadata and associated content. It would possibly distribute that metadata and content to more than one dCDN, which in turn distribute that metadata and content to additional CDNs located further downstream. An intermediate CDN is a dCDN that passes on CDNI Metadata and content to dCDNs located further downstream. A "diamond" configuration is one where a dCDN can acquire metadata and content originated in one uCDN from that uCDN itself and an intermediate CDN, or via more than one intermediate CDN. CI/T Commands originating in the single source uCDN affect metadata and content in all dCDNs; however, in a diamond configuration, it may not be possible for the dCDN to determine from which uCDN it acquired content. In this case, a dCDN MUST allow each uCDN from which it may have acquired the content to act upon that content using CI/T Commands. In all other cases, a dCDN MUST reject CI/T Commands from a uCDN that attempts to act on another uCDN's content by using, for example, responding with an HTTP 403 ("Forbidden"). Security considerations are discussed further in Section 12. The diamond configuration may lead to inefficient interactions, but the interactions are otherwise harmless. For example: * When the uCDN issues an "invalidate" CI/T Command, a dCDN will receive that command from multiple directly connected uCDNs. The dCDN may schedule multiple such commands separately, and the last scheduled command may affect content already revalidated following execution of the "invalidate" command that was scheduled first. * If one of a dCDN's directly connected uCDNs loses its rights to distribute content, it may issue a CI/T "purge" command. That purge may affect content the dCDN could retain because it's distributed by another directly connected uCDN. But, that content can be reacquired by the dCDN from the remaining uCDN. * When the uCDN originating an item of content issues a CI/T purge followed by a pre-position, two directly connected uCDNs will pass those commands to a dCDN. That dCDN implementation need not merge those operations or notice the repetition, in which case the purge issued by one uCDN will complete before the other. The first uCDN Sopher, et al. Expires 9 December 2024 [Page 9] Internet-Draft CDN Interconnect Triggers June 2024 to finish its purge may then forward the "preposition" trigger, and content pre-positioned as a result might be affected by the still-running purge issued by the other uCDN. However, the dCDN will reacquire that content as needed, or when it's asked to pre- position the content by the second uCDN. A dCDN implementation could avoid this interaction by knowing which uCDN it acquired the content from, or it could minimize the consequences by recording the time at which the "invalidate"/"purge" command was received and not applying it to content acquired after that time. 2.3. Trigger Results Possible states for a Trigger Status Resource are defined in Section 6.2.6. The CI/T Trigger Command MUST NOT be reported as "complete" until all operations have been completed successfully. The reasons for failure, and URLs or patterns affected, SHOULD be enumerated in the Trigger Status Resource. For more details, see Section 5.7. If a dCDN is also acting as a uCDN in a cascade, it MUST forward CI/T Commands to any dCDNs that may be affected. The CI/T Trigger Command MUST NOT be reported as "complete" in a CDN until it is "complete" in all of its dCDNs. If a CI/T Trigger Command is reported as "processed" in any dCDN, intermediate CDNs MUST NOT report "complete"; instead, they MUST also report "processed". A CI/T Command MAY be reported as "failed" as soon as it fails in a CDN or in any of its dCDNs. A cancelled CI/T Trigger Command MUST be reported as "cancelling" until it has been reported as "cancelled", "complete", or "failed" by all dCDNs in a cascade. 3. Trigger Specification The following attributes are defining the trigger execution. 3.1. Trigger Action Trigger Action is used in a Trigger Specification to describe trigger actions. It was initially referred to in [RFC8007] as "Trigger Type". All trigger actions MUST be registered in the IANA "CDNI CI/T Trigger Types" registry (see Section 11.2). Sopher, et al. Expires 9 December 2024 [Page 10] Internet-Draft CDN Interconnect Triggers June 2024 A dCDN receiving a request containing a trigger action it does not recognize or does not support MUST reject the request by creating a Trigger Status Resource with a status of "failed" and the "errors" array containing an Error.v2 Description with error "eunsupported" (see Section 6.2.7). The following trigger actions are defined by this document: +=============+===============================================+ | JSON String | Description | +=============+===============================================+ | preposition | A request for the dCDN to acquire metadata or | | | content. | +-------------+-----------------------------------------------+ | invalidate | A request for the dCDN to invalidate metadata | | | or content. After servicing this request, | | | the dCDN will not use the specified data | | | without first revalidating it using, for | | | example, an "If-None-Match" HTTP request. | | | The dCDN need not erase the associated data. | +-------------+-----------------------------------------------+ | purge | A request for the dCDN to erase metadata or | | | content. After servicing the request, the | | | specified data MUST NOT be held on the dCDN | | | (the dCDN should reacquire the metadata or | | | content from the uCDN if it needs it). | +-------------+-----------------------------------------------+ Table 1 3.2. Trigger Spec The CDNI Control Interface / Triggers 1st edition [RFC8007] defines a set of properties and objects used by the trigger commands in order to specify the targets upon which the trigger is applied. This document modifies the trigger interface objects so it has a list of trigger specs. Such structure improves the interface's extensibility and flexibility. Furthermore, the document defines a generic trigger spec object that acts as a wrapper for managing individual CDNI trigger specs in an opaque manner, allowing future extension of the interface. All trigger specs MUST be registered in the IANA "CDNI CI/T Trigger Specs" registry (see Section 11.3). Sopher, et al. Expires 9 December 2024 [Page 11] Internet-Draft CDN Interconnect Triggers June 2024 A dCDN receiving a request containing a trigger spec it does not recognize or does not support MUST reject the request by creating a Trigger Status Resource with a status of "failed" and the "errors" array containing an Error.v2 Description with error "espec" (see Section 6.2.7). This document also defines an initial set of trigger spec objects and registers them in the IANA "CDNI CI/T Trigger Specs" registry: +===================+========================================+ | JSON String | Description | +===================+========================================+ | urls | Allowing the specification of trigger | | | targets via URLs. | +-------------------+----------------------------------------+ | ccids | Allowing the specification of trigger | | | targets via CCIDs content grouping, as | | | defined in section 4.2.8 [RFC8006]. | +-------------------+----------------------------------------+ | uri-pattern-match | Allowing the specification of trigger | | | targets via [RFC3986] URI patterns. | +-------------------+----------------------------------------+ | uri-regex-match | Allowing the specification of trigger | | | targets via regexes matching their | | | URI, as defined in Section 7.4. | +-------------------+----------------------------------------+ | content-playlist | Allowing the specification of trigger | | | targets via a playlist URI and a media | | | protocol identifier. | +-------------------+----------------------------------------+ Table 2 3.2.1. Trigger Subject As the scope of the trigger may relate to either metadata as well as content, the "trigger spec object" also specifies the trigger's target subject (i.e., metadata or content) against which to match. All trigger subjects MUST be registered in the IANA "CDNI CI/T Trigger Subjects" registry (see Section 11.4). A dCDN receiving a request containing a trigger subject it does not recognize or does not support MUST reject the request by creating a Trigger Status Resource with a status of "failed" and the "errors" array containing an Error.v2 Description with error "esubject" (see Section 6.2.7). Sopher, et al. Expires 9 December 2024 [Page 12] Internet-Draft CDN Interconnect Triggers June 2024 This document also defines an initial set of trigger subject values and registers them in the IANA "CDNI CI/T Trigger Subjects" registry: +=============+====================================================+ | JSON String | Description | +=============+====================================================+ | metadata | Indicating the trigger target specification refers | | | to Metadata object, as defined at [RFC8006]. | +-------------+----------------------------------------------------+ | content | Indicating the trigger target specification refers | | | to client facing content. | +-------------+----------------------------------------------------+ Table 3 3.2.2. Content URLs Each CI/T Command usually refers to the targets by the target URLs, using a "urls" trigger spec object or some aggregating spec such as the "url-regex-match". If content URLs are transformed by an intermediate CDN in a cascade, that intermediate CDN MUST similarly transform URLs in CI/T Commands it passes to its dCDN. When processing Trigger Specifications, CDNs MUST ignore the URL scheme (HTTP or HTTPS) in comparing URLs. For example, for a CI/T "invalidate" or "purge" command, content MUST be invalidated or purged regardless of the protocol clients used to request it. 3.3. Trigger Extensibility The CDNI Control Interface / Triggers 1st edition [RFC8007] defines a set of properties and objects used by the trigger commands. This 2nd edition defines an extension mechanism to the triggers interface that enables applications to add instructions for finer control over the trigger execution, for example indicating a time window in which to execute the trigger. This document specifies a generic trigger extension object wrapper for managing individual CDNI trigger extensions in an opaque manner. All trigger extensions are optional, and it is thus the responsibility of the extension specification to define a consistent default behavior for the case the extension is not present. All trigger extensions MUST be registered in the IANA "CDNI CI/T Trigger Extensions" registry (see Section 11.6). Sopher, et al. Expires 9 December 2024 [Page 13] Internet-Draft CDN Interconnect Triggers June 2024 This document also defines an initial set of trigger extension objects and registers them in the IANA "CDNI CI/T Trigger Extensions" registry: +=================+=========================================+ | JSON String | Description | +=================+=========================================+ | location-policy | Allowing the control over the locations | | | in which the trigger is executed. | +-----------------+-----------------------------------------+ | time-policy | Allowing the scheduling of a trigger to | | | run in a specific time window. | +-----------------+-----------------------------------------+ Table 4 Example use cases * Pre-position with cache location policy * Purge content with cache location policy * Pre-position at a specific time * Purge by content acquisition time (e.g., purge all content acquired in the past X hours) 4. Collections of Trigger Status Resources As described in Section 2, Trigger Status Resources exist in the dCDN to report the status of activity triggered by each uCDN. A collection of Trigger Status Resources is a resource that contains a reference to each Trigger Status Resource in that collection. Note that the collection may possibly refer to Trigger Status Resources of triggers from several CI/T objects versions, i.e., a subsequent call for the retrieval of the relevant trigger status may provide objects of various MIME media types: ci-trigger-status as defined in [RFC8007], ci-trigger-status.v2 defined in this document, or objects of future CI/T objects versions, based on the CI/T command version used for the creation of the trigger. The dCDN MUST make a collection of a uCDN's Trigger Status Resources available to that uCDN. This collection includes all of the Trigger Status Resources created for CI/T Commands from the uCDN that have been accepted by the dCDN and have not yet been deleted by the uCDN or expired and removed by the dCDN (as described in Section 5.4). Trigger Status Resources belonging to a uCDN MUST NOT be visible to Sopher, et al. Expires 9 December 2024 [Page 14] Internet-Draft CDN Interconnect Triggers June 2024 any other CDN. The dCDN could, for example, achieve this by offering different collection URLs to each uCDN and by filtering the response based on the uCDN with which the HTTP client is associated. To trigger an activity in a dCDN or to cancel a triggered activity, the uCDN POSTs a CI/T Command to the dCDN's collection of the uCDN's Trigger Status Resources. In order to allow the uCDN to check the status of multiple jobs in a single request, the dCDN MAY also maintain collections representing filtered views of the collection of all Trigger Status Resources. These filtered collections are "optional-to-implement", but if they are implemented, the dCDN MUST include links to them in the collection of all Trigger Status Resources. The filtered collections are: * Pending - Trigger Status Resources for CI/T Trigger Commands that have been accepted but not yet acted upon. * Active - Trigger Status Resources for CI/T Trigger Commands that are currently being processed in the dCDN. * Complete - Trigger Status Resources representing activity that completed successfully, and "processed" CI/T Trigger Commands for which no further status updates will be made by the dCDN. * Failed - Trigger Status Resources representing CI/T Commands that failed or were cancelled by the uCDN. 5. CDNI Trigger Interface This section describes an interface to enable a uCDN to trigger activity in a dCDN. The CI/T interface builds on top of HTTP, so dCDNs may make use of any HTTP feature when implementing the CI/T interface. For example, a dCDN SHOULD make use of HTTP's caching mechanisms to indicate that a requested response/representation has not been modified, reducing the uCDN's processing needed to determine whether the status of triggered activity has changed. All dCDNs implementing CI/T MUST support the HTTP GET, HEAD, POST, and DELETE methods as defined in [RFC9110]. The only representation specified in this document is JSON [RFC8259]. It MUST be supported by the uCDN and by the dCDN. Sopher, et al. Expires 9 December 2024 [Page 15] Internet-Draft CDN Interconnect Triggers June 2024 The URL of the dCDN's collection of all Trigger Status Resources needs to be either discovered by or configured in the uCDN. The mechanism for discovery of that URL is outside the scope of this document. CI/T Commands are POSTed to the dCDN's collection of all Trigger Status Resources. If a CI/T Trigger Command is accepted by the dCDN, the dCDN creates a new Trigger Status Resource and returns its URI to the uCDN in an HTTP 201 response. The triggered activity can then be monitored by the uCDN using that resource and the collections described in Section 4. The URI of each Trigger Status Resource is returned to the uCDN when it is created, and URIs of all Trigger Status Resources are listed in the dCDN's collection of all Trigger Status Resources. This means all Trigger Status Resources can be discovered by the uCDN, so dCDNs are free to assign whatever structure they desire to the URIs for CI/ T resources. Therefore, uCDNs MUST NOT make any assumptions regarding the structure of CI/T URIs or the mapping between CI/T objects and their associated URIs. URIs present in the examples in this document are purely illustrative and are not intended to impose a definitive structure on CI/T interface implementations. 5.1. Creating Triggers To issue a CI/T Command, the uCDN makes an HTTP POST to the dCDN's collection of all of the uCDN's Trigger Status Resources. The request body of that POST is a CI/T Command, as described in Section 6.1.1. The dCDN validates the CI/T Command. If the command is malformed or the uCDN does not have sufficient access rights, the dCDN MUST either respond with an appropriate 4xx HTTP error code and not create a Trigger Status Resource or create a "failed" Trigger Status Resource containing an appropriate Error.v2 Description. When a CI/T Trigger Command is accepted, the dCDN MUST create a new Trigger Status Resource that will convey a specification of the CI/T Command and its current status. The HTTP response to the uCDN MUST have status code 201 and MUST convey the URI of the Trigger Status Resource in the Location header field [RFC9110]. The HTTP response SHOULD include the content of the newly created Trigger Status Resource. This is particularly important in cases where the CI/T Trigger Command has completed immediately. Once a Trigger Status Resource has been created, the dCDN MUST NOT reuse its URI, even after that Trigger Status Resource has been removed. Sopher, et al. Expires 9 December 2024 [Page 16] Internet-Draft CDN Interconnect Triggers June 2024 The dCDN SHOULD track and report on the progress of CI/T Trigger Commands using a Trigger Status Resource (Section 6.1.3). If the dCDN is not able to do that, it MUST indicate that it has accepted the request but will not be providing further status updates. To do this, it sets the status of the Trigger Status Resource to "processed". In this case, CI/T processing should continue as for a "complete" request, so the Trigger Status Resource MUST be added to the dCDN's collection of complete Trigger Status Resources. The dCDN SHOULD also provide an estimated completion time for the request by using the "etime" property of the Trigger Status Resource. This will allow the uCDN to schedule pre-positioning after an earlier delete of the same URLs is expected to have finished. If the dCDN is able to track the execution of CI/T Commands and a CI/ T Command is queued by the dCDN for later action, the "status" property of the Trigger Status Resource MUST be "pending". Once processing has started, the status MUST be "active". Finally, once the CI/T Command is complete, the status MUST be set to "complete" or "failed". A CI/T Trigger Command may result in no activity in the dCDN if, for example, it is an "invalidate" or "purge" request for data the dCDN has not yet acquired, or a "preposition" request for data that it has already acquired and that is still valid. In this case, the status of the Trigger Status Resource MUST be "processed" or "complete", and the Trigger Status Resource MUST be added to the dCDN's collection of complete Trigger Status Resources. Once created, Trigger Status Resources can be cancelled or deleted by the uCDN, but not modified. The dCDN MUST reject PUT and POST requests from the uCDN to Trigger Status Resources by responding with an appropriate HTTP status code -- for example, 405 ("Method Not Allowed"). 5.2. Checking Status The uCDN has two ways to check the progress of CI/T Commands it has issued to the dCDN, as described in Sections Section 5.2.1 and Section 5.2.2. To allow the uCDN to check for changes in the status of a Trigger Status Resource or collection of Trigger Status Resources without refetching the whole resource or collection, the dCDN SHOULD include entity-tags (ETags) for the uCDN to use as cache validators, as defined in [RFC9110]. Sopher, et al. Expires 9 December 2024 [Page 17] Internet-Draft CDN Interconnect Triggers June 2024 The dCDN SHOULD use the cache control headers for responses to GETs for Trigger Status Resources and Collections to indicate the frequency at which it recommends that the uCDN should poll for change. 5.2.1. Polling Trigger Status Resource Collections The uCDN can fetch the collection of its Trigger Status Resources or filtered views of that collection. This makes it possible to poll the status of all CI/T Trigger Commands in a single request. If the dCDN moves a Trigger Status Resource from the active to the completed collection, the uCDN can fetch the result of that activity. When polling in this way, the uCDN SHOULD use HTTP ETags to monitor for change, rather than repeatedly fetching the whole collection. An example of this is given in Section 10.2.4. 5.2.2. Polling Trigger Status Resources The uCDN has a URI provided by the dCDN for each Trigger Status Resource it has created. It may fetch that Trigger Status Resource at any time. This can be used to retrieve progress information and to fetch the result of the CI/T Command. When polling in this way, the uCDN SHOULD use HTTP ETags to monitor for change, rather than repeatedly fetching the Trigger Status Resource. 5.3. Cancelling Triggers The uCDN can request cancellation of a CI/T Trigger Command by POSTing a CI/T Cancel Command (see Section 6.1.2) to the specific trigger's Trigger Status Resource URL. The dCDN is required to accept and respond to the CI/T Cancel Command, but the actual cancellation of a CI/T Trigger Command is optional-to-implement. The dCDN MUST respond to the CI/T Cancel Command appropriately -- for example, with HTTP status code 200 ("OK") if the cancellation has been processed and the CI/T Command is inactive, 202 ("Accepted") if the command has been accepted but the CI/T Command remains active, 404 ("Not Found") when the Trigger Status Resource does not exist, or 501 ("Not Implemented") if cancellation is not supported by the dCDN. Sopher, et al. Expires 9 December 2024 [Page 18] Internet-Draft CDN Interconnect Triggers June 2024 If cancellation of a "pending" Trigger Status Resource is accepted by the dCDN, the dCDN SHOULD NOT start the processing of that activity. Issuing a CI/T Cancel Command for a "pending" Trigger Status Resource does not, however, guarantee that the corresponding activity will not be started, because the uCDN cannot control the timing of that activity. Processing could, for example, start after the POST is sent by the uCDN but before that request is processed by the dCDN. If cancellation of an "active" or "processed" Trigger Status Resource is accepted by the dCDN, the dCDN SHOULD stop processing the CI/T Command. However, as with cancellation of a "pending" CI/T Command, the dCDN does not guarantee this. If the CI/T Command cannot be stopped immediately, the status in the corresponding Trigger Status Resource MUST be set to "cancelling", and the Trigger Status Resource MUST remain in the collection of Trigger Status Resources for active CI/T Commands. If processing is stopped before normal completion, the status value in the Trigger Status Resource MUST be set to "cancelled", and the Trigger Status Resource MUST be included in the collection of failed CI/T Trigger Commands. Cancellation of a "complete" or "failed" Trigger Status Resource requires no processing in the dCDN. Its status MUST NOT be changed to "cancelled". 5.4. Deleting Triggers The uCDN can delete Trigger Status Resources at any time using the HTTP DELETE method. As defined in the CDNI Control Interface / Triggers 1st edition [RFC8007], the effect is similar to cancellation, but no Trigger Status Resource remains afterwards. Note that in cases where the trigger's status prior to the deletion is not a terminal status (i.e., "completed", "failed" or "cancelled"), the uCDN would not have the ability to further monitor the cancellation process and the final status of the trigger. For this reason, it is recommended that the cancellation command (see Section 6.1.2) is used prior to trigger deletion, and deletion is only used on triggers with a terminal status. Once deleted, the references to a Trigger Status Resource MUST be removed from all Trigger Status Resource collections. Subsequent requests to GET the deleted Trigger Status Resource SHOULD be rejected by the dCDN with an HTTP error. If a "pending" Trigger Status Resource is deleted, the dCDN SHOULD NOT start the processing of that activity. Deleting a "pending" Trigger Status Resource does not, however, guarantee that it has not Sopher, et al. Expires 9 December 2024 [Page 19] Internet-Draft CDN Interconnect Triggers June 2024 started, because the uCDN cannot control the timing of that activity. Processing may, for example, start after the DELETE is sent by the uCDN but before that request is processed by the dCDN. If an "active" or "processed" Trigger Status Resource is deleted, the dCDN SHOULD stop processing the CI/T Command. However, as with deletion of a "pending" Trigger Status Resource, the dCDN does not guarantee this. Deletion of a "complete" or "failed" Trigger Status Resource requires no processing in the dCDN other than deletion of the Trigger Status Resource. 5.5. Expiry of Trigger Status Resources The dCDN can choose to automatically delete Trigger Status Resources some time after they become "complete", "processed", "failed", or "cancelled". In this case, the dCDN will remove the Trigger Status Resource and respond to subsequent requests for it with an HTTP error. If the dCDN does remove Trigger Status Resources automatically, it MUST report the length of time after which it will do so, using a property of the collection of all Trigger Status Resources. It is RECOMMENDED that Trigger Status Resources are not automatically deleted by the dCDN for at least 24 hours after they become "complete", "processed", "failed", or "cancelled". To ensure that it is able to get the status of its Trigger Status Resources for completed and failed CI/T Commands, it is RECOMMENDED that the uCDN polling interval is less than the time after which records for completed activity will be deleted. 5.6. Loop Detection and Prevention Given three CDNs, A, B, and C, if CDNs B and C delegate delivery of CDN A's content to each other, CDN A's CI/T Commands could be passed between CDNs B and C in a loop. More complex networks of CDNs could contain similar loops involving more hops. In order to prevent and detect such CI/T loops, each CDN uses a CDN Provider ID (PID) to uniquely identify itself. In every CI/T Command it originates or cascades, each CDN MUST append an array element containing its CDN PID to a JSON array under an entry named "cdn- path". When receiving CI/T Commands, a dCDN MUST check the cdn-path and reject any CI/T Command that already contains its own CDN PID in the cdn-path. Transit CDNs MUST check the cdn-path and not cascade the CI/T Command to dCDNs that are already listed in the cdn-path. Sopher, et al. Expires 9 December 2024 [Page 20] Internet-Draft CDN Interconnect Triggers June 2024 The CDN PID consists of the two characters "AS" followed by the CDN provider's Autonomous System number [RFC1930], then a colon (":") and an additional qualifier that is used to guarantee uniqueness in case a particular AS has multiple independent CDNs deployed -- for example, "AS64496:0". If the CDN provider has multiple ASes, the same AS number SHOULD be used in all messages from that CDN provider, unless there are multiple distinct CDNs. If the CDNI Request Routing Redirection interface (RI) described in [RFC7975] is implemented by the dCDN, the CI/T interface and the RI SHOULD use the same CDN PID. 5.7. Error Handling A dCDN can signal rejection of a CI/T Command using HTTP status codes -- for example, 400 ("Bad Request") if the request is malformed, or 403 ("Forbidden") or 404 ("Not Found") if the uCDN does not have permission to issue CI/T Commands or it is trying to act on another CDN's data. If any part of the CI/T Trigger Command fails, the trigger SHOULD be reported as "failed" once its activity is complete or if no further errors will be reported. The "errors" property in the Trigger Status Resource will be used to enumerate which actions failed and the reasons for failure, and can be present while the Trigger Status Resource is still "pending" or "active", if the CI/T Trigger Command is still running for some URLs or patterns in the Trigger Specification. Once a request has been accepted, processing errors are reported in the Trigger Status Resource using a list of Error.v2 Descriptions. Each Error.v2 Description is used to report errors against one or more of the URLs or patterns in the Trigger Specification. If a Surrogate affected by a CI/T Trigger Command is offline in the dCDN or the dCDN is unable to pass a CI/T Command on to any of its cascaded dCDNs: * If the CI/T Command is abandoned by the dCDN, the dCDN SHOULD report an error. * A CI/T "invalidate" command may be reported as "complete" when Surrogates that may have the data are offline. In this case, Surrogates MUST NOT use the affected data without first revalidating it when they are back online. Sopher, et al. Expires 9 December 2024 [Page 21] Internet-Draft CDN Interconnect Triggers June 2024 * CI/T "preposition" and "purge" commands can be reported as "processed" if affected caches are offline and the activity will complete when they return to service. * Otherwise, the dCDN SHOULD keep the Trigger Status Resource in state "pending" or "active" until either the CI/T Command is acted upon or the uCDN chooses to cancel it. 5.7.1. Error propagation This subsection explains the mechanism for enabling the uCDN to trace an error back to the dCDN in which it occurred. CDNI triggers may be propagated over a chain of downstream CDNs. For example, an upstream CDN A (uCDN-A) that is delegating to a downstream CDN B (dCDN-B) and dCDN-B is delegating to a downstream CDN C (dCDN-C). Triggers sent from uCDN-A to dCDN-B may be redistributed from dCDN-B to dCDN-C, and errors can occur anywhere along the path. Therefore, it might be essential for uCDN-A that sets the trigger, be able to trace back an error to the downstream CDN where it occurred. This document adds a mechanism to propagate the PID of the dCDN where the fault occurred, back to the uCDN by adding the PID to the error.v2 description. When dCDN-B propagates a trigger further to the downstream dCDN-C, it MUST also propagate back the errors received in the trigger status resource from dCDN-C by adding them to the errors array in its own status resource to be sent back to the originating uCDN-A. While propagating back the errors dCDN-B MAY also specify the dCDN-C PID, indicating to which CDN the error specifically relates. The trigger originating upstream CDN then receives an array built of the errors that occurred in all the CDNs along the execution path, where each error MAY be carrying its own CDN identifier. Figure 2 below is an example showing the message flow used by uCDN-A to trigger activity in the dCDN-B, followed by dCDN-C, as well as the discovery of the status of that activity, including the Error Propagation. uCDN-A dCDN-B dCDN-C | | | | (1) POST | | | https://dcdn-b.example.com | | | /triggers/uCDN-A | | [ ]--------------------------->[ ]--+ | | [ ] | (2) | | [ ]<-+ | | (3) HTTP 201 Response. [ ] | |<----------------------------[ ] | | Loc: [ ] | | https://dcdn-b.example.com [ ] (4) POST | Sopher, et al. Expires 9 December 2024 [Page 22] Internet-Draft CDN Interconnect Triggers June 2024 | /triggers/uCDN-A/123 [ ] https://dcdn-c.example.com | | [ ] /triggers/dCDN-B | (5) | [ ]--------------------------->[ ]--+ | | [ ] | | | [ ]<-+ | | (6) HTTP 201 Response. [ ] | [ ]<---------------------------[ ] | | Loc: | | | https://dcdn-c.example.com | | | /triggers/dCDN-B/456 | | | | | [ ]--+ | | [ ] | (7.1) | | [ ]<-+ [ ]--+ | | (7.2) [ ] | | | [ ]<-+ | | | . . . . . . . . . | | (8) GET | | | https://dcdn-c.example.com | | | /triggers/dCDN-B/456 | | [ ]--------------------------->[ ] | | [ ] | | (9) HTTP 200 [ ] | | Trigger Status Resource [ ] | [ ]<---------------------------[ ] | | | . . . . . . . . . | (10) GET | | | https://dcdn-b.example.com | | | /triggers/uCDN-A/123 | | [ ]--------------------------->[ ] | | [ ] | | (11) HTTP 200 [ ] | | Trigger Status Resource [ ] | [ ]<---------------------------[ ] | Figure 2: CDNI Message Flow for Triggers, Including Error Propagation The steps in Figure 2 are as follows: Sopher, et al. Expires 9 December 2024 [Page 23] Internet-Draft CDN Interconnect Triggers June 2024 1. The uCDN-A triggers action in the dCDN-B by POSTing a CI/T Command to a collection of Trigger Status Resources "https://dcdn-b.example.com/triggers/uCDN-A". This URL was given to the uCDN-A when the CI/T interface was established. 2. The dCDN-B authenticates the request, validates the CI/T Command, and, if it accepts the request, creates a new Trigger Status Resource. 3. The dCDN-B responds to the uCDN-A with an HTTP 201 response status and the location of the Trigger Status Resource. 4. The dCDN-B triggers the action in the dCDN-C by POSTing a CI/T Command to a collection of Trigger Status Resources "https://dcdn-c.example.com/triggers/dCDN-B". This URL was given to the dCDN-B when the CI/T interface was established. 5. The dCDN-C authenticates the request, validates the CI/T Command, and, if it accepts the request, creates a new Trigger Status Resource. 6. The dCDN-C responds to the dCDN-B with an HTTP 201 response status and the location of the Trigger Status Resource. 7. The dCDN-C acts upon the CI/T Command. However, the command fails at dCDN-C as, for example, the Trigger Specification contains an "action type" that is not supported by dCDN-C. dCDN-C's action is depicted by 7.2 in the diagram, while 7.1 shows dCDN-B acting on its own command. 8. The dCDN-B queries, possibly repeatedly, the Trigger Status Resource in dCDN-C. 9. The dCDN-C responds with the Trigger Status Resource, describing the progress or results of the CI/T Trigger Command. In the described flow, the returned Status is "failed", with an Error.v2 Description Object holding an "eunsupported" Error Code reflecting the status response. 10. The uCDN-A queries, possibly repeatedly, the Trigger Status Resource in dCDN-B. Sopher, et al. Expires 9 December 2024 [Page 24] Internet-Draft CDN Interconnect Triggers June 2024 11. The dCDN-B responds with the Trigger Status Resource, describing the progress or results of the CI/T Trigger Command. In the flow described above, the returned Status is "failed", and the "eunsupported" error received in the trigger status resource from dCDN-C is propagated along with dCDN-C PID by adding it to the errors array in dCDN-B's own status resource to be sent back to the originating uCDN-A. 6. CI/T Object Properties and Encoding The CI/T Trigger Command, CI/T Cancel Command, Trigger Status Resources, and Trigger Collections, as well as their properties, are encoded using JSON, as defined in Sections Section 6.1.1, Section 6.1.2, Section 6.1.3, and Section 6.1.4, respectively. They MUST use the MIME media type "application/cdni", with parameter "ptype" values as defined below and in Section 11.1. Names in JSON are case sensitive. The names and literal values specified in the present document MUST always use lowercase. JSON types, including "object", "array", "number", and "string", are defined in [RFC8259]. Unrecognized name/value pairs in JSON objects SHOULD NOT be treated as an error by either the uCDN or dCDN. They SHOULD be ignored during processing and passed on by the dCDN to any further dCDNs in a cascade. 6.1. CI/T Objects The top-level objects defined by the CI/T interface are described in this section. The encoding of values used by these objects is described in Section 6.2. 6.1.1. CI/T Trigger Command CI/T Trigger Command, which is used to create a new trigger, MUST use a MIME media type of "application/cdni; ptype=ci-trigger- command.trigger.v2". A CI/T Trigger Command is encoded as a JSON object containing the following name/value pairs. Name: trigger Description: A specification of the trigger action and a set of targets upon which to act. Sopher, et al. Expires 9 December 2024 [Page 25] Internet-Draft CDN Interconnect Triggers June 2024 Value: A Trigger.v2 Specification, as defined in Section 6.2.1. Mandatory: Yes. Name: cdn-path Description: The CDN PIDs of CDNs that have already issued the CI/T Command to their dCDNs. Value: A non-empty JSON array of JSON strings, where each string is a CDN PID as defined in Section 5.6. Mandatory: Yes. 6.1.2. CI/T Cancel Command CI/T Cancel Command, which is used to cancel an existing trigger, MUST use a MIME media type of "application/cdni; ptype=ci-trigger- command.cancel". A CI/T Cancel Command is encoded as an empty JSON object. 6.1.3. Trigger Status Resources Trigger Status Resources MUST use a MIME media type of "application/ cdni; ptype=ci-trigger-status.v2". A Trigger Status Resource is encoded as a JSON object containing the following name/value pairs. Name: trigger Description: The Trigger Specification POSTed in the body of the CI/T Command. Note that this need not be a byte-for-byte copy. For example, in the JSON representation the dCDN may re- serialize the information differently. Value: A Trigger.v2 Specification, as defined in Section 6.2.1. Mandatory: Yes. Name: ctime Description: Time at which the CI/T Command was received by the dCDN. Time is determined by the dCDN; there is no requirement to synchronize clocks between interconnected CDNs. Value: Absolute Time, as defined in Section 6.2.4. Mandatory: Yes. Sopher, et al. Expires 9 December 2024 [Page 26] Internet-Draft CDN Interconnect Triggers June 2024 Name: mtime Description: Time at which the Trigger Status Resource was last modified. Time is determined by the dCDN; there is no requirement to synchronize clocks between interconnected CDNs. Value: Absolute Time, as defined in Section 6.2.4. Mandatory: Yes. Name: etime Description: Estimate of the time at which the dCDN expects to complete the activity. Time is determined by the dCDN; there is no requirement to synchronize clocks between interconnected CDNs. Value: Absolute Time, as defined in Section 6.2.4. Mandatory: No. Name: status Description: Current status of the triggered activity. Value: Trigger Status, as defined in Section 6.2.6. Mandatory: Yes. Name: status-reason Description: A human-readable explanation for the object status. Value: A JSON string, the human-readable status reason. Mandatory: No. Name: errors Description: Descriptions of errors that have occurred while processing a Trigger Command. Value: An array of Error.v2 Descriptions, as defined in Section 6.2.5. An empty array is allowed and is equivalent to omitting "errors" from the object. Mandatory: No. 6.1.4. Trigger Collections Trigger Collections MUST use a MIME media type of "application/cdni; ptype=ci-trigger-collection". Sopher, et al. Expires 9 December 2024 [Page 27] Internet-Draft CDN Interconnect Triggers June 2024 A Trigger Collection is encoded as a JSON object containing the following name/value pairs. Name: triggers Description: Links to Trigger Status Resources in the collection. Value: A JSON array of zero or more URLs, represented as JSON strings. Mandatory: Yes. Name: staleresourcetime Description: The length of time for which the dCDN guarantees to keep a completed Trigger Status Resource. After this time, the dCDN SHOULD delete the Trigger Status Resource and all references to it from collections. Value: A JSON number, which must be a positive integer, representing time in seconds. Mandatory: Yes, in the collection of all Trigger Status Resources if the dCDN deletes stale entries. If the property is present in the filtered collections, it MUST have the same value as in the collection of all Trigger Status Resources. Name: coll-all Description: Link to a Trigger Collection representing all Trigger Status Resources. Value: A URL represented as a JSON string. Mandatory: Links to all of the filtered collections are mandatory in the collection of all Trigger Status Resources, if the dCDN implements the filtered collections. Otherwise, optional. Name: coll-pending Description: Link to a Trigger Collection representing Trigger Status Resources that have been accepted but not yet acted upon. Value: A URL represented as a JSON string. Mandatory: Links to all of the filtered collections are mandatory in the collection of all Trigger Status Resources, if the dCDN implements the filtered collections. Otherwise, optional. Sopher, et al. Expires 9 December 2024 [Page 28] Internet-Draft CDN Interconnect Triggers June 2024 Name: coll-active Description: Link to a Trigger Collection representing Trigger Status Resources that are currently being processed in the dCDN. Value: A URL represented as a JSON string. Mandatory: Links to all of the filtered collections are mandatory in the collection of all Trigger Status Resources, if the dCDN implements the filtered collections. Otherwise, optional. Name: coll-complete Description: Link to a Trigger Collection representing Trigger Status Resources that completed successfully. Value: A URL represented as a JSON string. Mandatory: Links to all of the filtered collections are mandatory in the collection of all Trigger Status Resources, if the dCDN implements the filtered collections. Otherwise, optional. Name: coll-failed Description: Link to a Trigger Collection representing Trigger Status Resources that failed or were cancelled by the uCDN. Value: A URL represented as a JSON string. Mandatory: Links to all of the filtered collections are mandatory in the collection of all Trigger Status Resources, if the dCDN implements the filtered collections. Otherwise, optional. Name: cdn-id Description: The CDN PID of the dCDN. Value: A JSON string, the dCDN's CDN PID, as defined in Section 5.6. Mandatory: Only in the collection of all Trigger Status Resources, if the dCDN implements the filtered collections. Optional in the filtered collections (the uCDN can always find the dCDN's cdn-id in the collection of all Trigger Status Resources, but the dCDN can choose to repeat that information in its implementation of filtered collections). Sopher, et al. Expires 9 December 2024 [Page 29] Internet-Draft CDN Interconnect Triggers June 2024 6.2. Properties of CI/T Objects This section defines the values that can appear in the top-level objects described in Section 6.1 and their encodings. 6.2.1. Trigger.v2 Specification A Trigger.v2 Specification is encoded as a JSON object containing the following name/value pairs. An unrecognized name/value pair in the Trigger Specification object contained in a CI/T Command SHOULD be preserved in the Trigger Specification of any Trigger Status Resource it creates. Note that the preferred method for extending the CI/T capabilities is by defining new related trigger specs and/or trigger extensions, rather than adding new properties to the Trigger.v2 object. Name: action Description: Defines the type of the CI/T Trigger Action. Value: Trigger Action Type, as defined in Section 3.1. Mandatory: Yes. Name: specs Description: Array of trigger specs representing trigger's targets. Value: Array of GenericTriggerSpec objects (see Section 6.2.2.1). Mandatory: Yes. Furthermore, the list MUST NOT be empty. Name: extensions Description: Array of trigger extensions. Value:Array of GenericTriggerExtension objects (see Section 6.2.3.2). Mandatory: No. The default is no extensions. Sopher, et al. Expires 9 December 2024 [Page 30] Internet-Draft CDN Interconnect Triggers June 2024 6.2.2. Generic Trigger Specs A "trigger.v2" object, as defined in Section 6.2.1, includes an array of trigger spec objects. Each trigger spec object contains properties that are used as trigger target selection directives for the dCDN when executing the trigger command, e.g., content URLs or metadata URI patterns. Each such CDNI Trigger Spec is a specialization of a CDNI GenericTriggerSpec object. The GenericTriggerSpec object abstracts the basic information required for trigger distribution from the specifics of any given property (i.e., property semantics, enforcement options, etc.). The semantics of the Trigger Specs list is additive, i.e., the trigger applies to any object matching one of the listed specs. 6.2.2.1. Generic Spec Object A GenericSpecObject object is a wrapper for managing individual CDNI Trigger specs in an opaque manner. Property: trigger-subject Description: Case-insensitive CDNI Trigger subject. Type: String containing the type of the subject matching the generic-trigger-spec-value property, such as "content" or "metadata" as define in Section 3.2.1. Mandatory: Yes. Property: generic-trigger-spec-type Description: Case-insensitive CDNI Trigger spec type. Type: String containing the spec type of the object contained in the generic-trigger-spec-value property (see table in Section 3.2). Mandatory: Yes. Property: generic-trigger-spec-value Description:A CDNI Trigger spec object. Type: Format/Type is defined by the value of the generic- trigger-spec-type property. Mandatory: Yes. Sopher, et al. Expires 9 December 2024 [Page 31] Internet-Draft CDN Interconnect Triggers June 2024 The structure of a JSON serialized GenericTriggerSpec object, containing a specific trigger spec is illustrated below: { "generic-trigger-spec-type": , "generic-trigger-spec-value": { }, "generic-trigger-spec-subject": } 6.2.3. CI/T Trigger Extensions A "trigger.v2" object, as defined in Section 6.2.1 includes an optional array of trigger extension objects. A trigger extension contains properties that are used as directives for the dCDN when executing the trigger command, e.g., location policies, time policies, and so on. Each such CDNI Trigger extension is a specialization of a CDNI GenericTriggerExtension object. The GenericTriggerExtension object abstracts the basic information required for trigger distribution from the specifics of any given property (i.e., property semantics, enforcement options, etc.). All trigger extensions are optional, and it is thus the responsibility of the extension specification to define a consistent default behavior for extensions supported by a dCDN when not specified by the uCDN. 6.2.3.1. Enforcement Options The trigger enforcement options concept is in accordance with the metadata enforcement options as defined in Section 3.2 of [RFC8006]. The GenericTriggerExtension object defines the properties contained within it as well as whether or not the properties are "mandatory-to- enforce". If the dCDN does not understand or support a mandatory-to- enforce property, the dCDN MUST NOT execute the trigger command. If the extension is not mandatory-to-enforce, then that GenericTriggerExtension object can be safely ignored and the trigger command can be processed in accordance with the rest of the CDNI Trigger spec. Although a CDN MUST NOT execute a trigger command if a mandatory-to- enforce extension cannot be enforced, it could still be safe to redistribute that trigger (the "safe-to-redistribute" property) to Sopher, et al. Expires 9 December 2024 [Page 32] Internet-Draft CDN Interconnect Triggers June 2024 another CDN without modification. For example, in the cascaded CDN case, a transit CDN (tCDN) could convey mandatory-to-enforce trigger extension to a dCDN. For a trigger extension that does not require customization or translation (i.e., trigger extension that is safe- to-redistribute), the data representation received off the wire MAY be stored and redistributed without being understood or supported by the tCDN. However, for trigger extension that requires translation, transparent redistribution of the uCDN trigger values might not be appropriate. Certain triggers extensions can be safely, though perhaps not optimally, redistributed unmodified. For example, pre- position command might be executed in suboptimal times for some geographies if transparently redistributed, but it might still work. Redistribution safety MUST be specified for each GenericTriggerExtension listed. If a CDN does not understand or support a given GenericTriggerExtension object that is not safe-to- redistribute, the CDN MUST set the "incomprehensible" flag to true for that GenericTriggerExtension object before redistributing it. The "incomprehensible" flag signals to a dCDN that trigger metadata was not properly transformed by the tCDN. A CDN MUST NOT attempt to execute a trigger with an extension that has been marked as "incomprehensible" by a uCDN. tCDNs MUST NOT change the value of mandatory-to-enforce or safe-to- redistribute when propagating a trigger to a dCDN. Although a tCDN can set the value of "incomprehensible" to true, a tCDN MUST NOT change the value of "incomprehensible" from true to false. Table 5 describes the action to be taken by a tCDN for the different combinations of mandatory-to-enforce ("MtE") and safe-to-redistribute ("StR") properties when the tCDN either does or does not understand the trigger extension object in question: Sopher, et al. Expires 9 December 2024 [Page 33] Internet-Draft CDN Interconnect Triggers June 2024 +=======+=======+============+=================================+ | MtE | StR | Extension | Trigger action | | | | object | | | | | understood | | | | | by tCDN | | +=======+=======+============+=================================+ | False | True | True | Can execute and redistribute. | +-------+-------+------------+---------------------------------+ | False | True | False | Can execute and redistribute. | +-------+-------+------------+---------------------------------+ | False | False | False | Can execute. MUST set | | | | | "incomprehensible" to true when | | | | | redistributing. | +-------+-------+------------+---------------------------------+ | False | False | True | Can execute. Can redistribute | | | | | after transforming the trigger | | | | | extension (if the CDN knows how | | | | | to do so safely); otherwise, | | | | | MUST set "incomprehensible" to | | | | | true when redistributing. | +-------+-------+------------+---------------------------------+ | True | True | True | Can execute and redistribute. | +-------+-------+------------+---------------------------------+ | True | True | False | MUST NOT execute but can | | | | | redistribute. | +-------+-------+------------+---------------------------------+ | True | False | True | Can execute. Can redistribute | | | | | after transforming the trigger | | | | | extension (if the CDN knows how | | | | | to do so safely); otherwise, | | | | | MUST set "incomprehensible" to | | | | | true when redistributing. | +-------+-------+------------+---------------------------------+ | True | False | False | MUST NOT serve. MUST set | | | | | "incomprehensible" to true when | | | | | redistributing. | +-------+-------+------------+---------------------------------+ Table 5: Action to be taken by a tCDN for the different combinations of MtE and StR properties Table 6 describes the action to be taken by a dCDN for the different combinations of mandatory-to-enforce and "incomprehensible" ("Incomp") properties, when the dCDN either does or does not understand the trigger extension object in question: Sopher, et al. Expires 9 December 2024 [Page 34] Internet-Draft CDN Interconnect Triggers June 2024 +=======+========+==================+==========================+ | MtE | Incomp | Extension object | Trigger action | | | | understood by | | | | | dCDN | | +=======+========+==================+==========================+ | False | False | True | Can execute. | +-------+--------+------------------+--------------------------+ | False | True | True | Can execute but MUST NOT | | | | | interpret/apply any | | | | | trigger extension marked | | | | | as "incomprehensible". | +-------+--------+------------------+--------------------------+ | False | False | False | Can execute. | +-------+--------+------------------+--------------------------+ | False | True | False | Can execute but MUST NOT | | | | | interpret/apply any | | | | | trigger extension marked | | | | | as "incomprehensible". | +-------+--------+------------------+--------------------------+ | True | False | True | Can execute. | +-------+--------+------------------+--------------------------+ | True | True | True | MUST NOT execute. | +-------+--------+------------------+--------------------------+ | True | False | False | MUST NOT execute. | +-------+--------+------------------+--------------------------+ | True | True | False | MUST NOT execute. | +-------+--------+------------------+--------------------------+ Table 6: Action to be taken by a dCDN for the different combinations of MtE and Incomp properties 6.2.3.2. GenericExtensionObject A GenericTriggerExtension object is a wrapper for managing individual CDNI Trigger extensions in an opaque manner. Property: generic-trigger-extension-type Description: Case-insensitive CDNI Trigger extension object type. Type: String containing the CDNI Extension Type [RFC7736] of the object contained in the generic-trigger-extension-value property (see table in Section 3.3). Mandatory: Yes. Property: generic-trigger-extension-value Sopher, et al. Expires 9 December 2024 [Page 35] Internet-Draft CDN Interconnect Triggers June 2024 Description: CDNI Trigger extension object. Type: Format/Type is defined by the value of the generic- trigger-extension-type property above. Mandatory: Yes. Property: mandatory-to-enforce Description: Flag identifying whether or not the enforcement of this trigger extension is mandatory. Type: Boolean Mandatory: No. Default is to treat the trigger extension as mandatory-to-enforce (i.e., a value of True). Property: safe-to-redistribute Description: Flag identifying whether or not this trigger extension can be safely redistributed without modification, even if the CDN fails to understand the extension. Type: Boolean Mandatory: No. Default is to allow transparent redistribution (i.e., a value of True). Property: incomprehensible Description: Flag identifying whether or not any CDN in the chain of delegation has failed to understand and/or failed to properly transform this trigger extension object. Note: This flag only applies to trigger extension objects whose safe-to- redistribute property has a value of False. Type: Boolean Mandatory: No. Default is comprehensible (i.e., a value of False). The structure of a JSON serialized GenericTriggerExtension object containing a specific trigger extension object is illustrated below: Sopher, et al. Expires 9 December 2024 [Page 36] Internet-Draft CDN Interconnect Triggers June 2024 { "generic-trigger-extension-type": , "generic-trigger-extension-value": { }, "mandatory-to-enforce": , "safe-to-redistribute": , "incomprehensible": } 6.2.4. Absolute Time A JSON number, seconds since the UNIX epoch (00:00:00 UTC on 1 January 1970). 6.2.5. Error.v2 Description An Error.v2 Description is used to report the failure of a CI/T Command or failure in the activity it triggered. It is encoded as a JSON object with the following name/value pairs: Name: error Value: Error Code, as defined in Section 6.2.7. Mandatory: Yes. Name: description Description: A human-readable description of the error. Value: A JSON string, the human-readable description. Mandatory: No. Name: specs Description: Array of trigger spec objects from the corresponding "specs" array at the Trigger Specification. Only those spec to which the error applies are listed. Value: Array Trigger Specifications, as defined in Section 6.2.1, where each spec object MUST be exactly as they appear in the request. Mandatory: Yes. Name: extensions Sopher, et al. Expires 9 December 2024 [Page 37] Internet-Draft CDN Interconnect Triggers June 2024 Description: Array of trigger extension objects copied from the corresponding "extensions" array from the Trigger Specification. Only those extensions to which the error applies are included, but those extensions MUST be exactly as they appear in the request. Value: Array of GenericTriggerExtension objects, where each extension object is copied from the "extensions" array values in the Trigger Specification. Mandatory: No. The "extensions" array SHOULD be used only if the error relates to extension objects. Property omission should be interpreted as "the error is not related to any extension". Name: cdn-id Description: The CDN PID of the CDN where the error occurred. The "cdn-id" property is used by the originating uCDN or by the propagating dCDN in order to distinguish in which CDN the error occurred. Value: A non-empty JSON string, where the string is a CDN PID as defined in Section Section 5.6 Mandatory: Yes. The dCDN may use its own CDN PID if it does not want to expose the CDN PIDs of dCDNs. Example of a JSON serialized Error.v2 Description object reporting a malformed Playlist: { "error": "econtent", "description": "Failed to parse HLS playlist", "specs": [ { "trigger-subject": "content", "generic-trigger-spec-type": "content-playlist", "generic-trigger-spec-value": { "playlist": "https://www.example.com/hls/title/index.m3u8", "media-protocol": "hls" } } ], "cdn": "AS64500:0" } Example of a JSON serialized Error.v2 Description object reporting an unsupported extension object: Sopher, et al. Expires 9 December 2024 [Page 38] Internet-Draft CDN Interconnect Triggers June 2024 { "errors": [ { "error": "eextension", "description": "unrecognized extension ", "specs": [ { "trigger-subject": "content", "generic-trigger-spec-type": "urls", "generic-trigger-spec-value": { "urls": [ "https://www.example.com/a/b/c/1", "https://www.example.com/a/b/c/2" ] } } ], "extensions": [ { "generic-trigger-extension-type": , "generic-trigger-extension-value": { } } ], "cdn": "AS64500:0" } ] } 6.2.6. Trigger Status Trigger Status describes the current status of the triggered activity. It MUST be one of the JSON strings in the following table: Sopher, et al. Expires 9 December 2024 [Page 39] Internet-Draft CDN Interconnect Triggers June 2024 +=============+==============================+ | JSON String | Description | +=============+==============================+ | pending | The CI/T Trigger Command has | | | not yet been acted upon. | +-------------+------------------------------+ | active | The CI/T Trigger Command is | | | currently being acted | +-------------+------------------------------+ | | upon. | +-------------+------------------------------+ | complete | The CI/T Trigger Command | | | completed successfully. | +-------------+------------------------------+ | processed | The CI/T Trigger Command has | | | been accepted, and no | +-------------+------------------------------+ | | further status update will | | | be made (can be used in | +-------------+------------------------------+ | | cases where completion | | | cannot be confirmed). | +-------------+------------------------------+ | failed | The CI/T Trigger Command | | | could not be completed. | +-------------+------------------------------+ | cancelling | Processing of the CI/T | | | Trigger Command is still in | +-------------+------------------------------+ | | progress, but the CI/T | | | Trigger Command has been | +-------------+------------------------------+ | | cancelled by the uCDN. | +-------------+------------------------------+ | cancelled | The CI/T Trigger Command was | | | cancelled by the uCDN. | +-------------+------------------------------+ Table 7 Along with the Trigger Status, the Trigger Status Resource object includes a Status Reason property, allowing the dCDN to provide additional information for the trigger status. For example, the dCDN may indicate that the trigger status is "pending" due to one of the execution prerequisites not being fulfilled. Such a prerequisite may possibly be specified via one of the extensions. Sopher, et al. Expires 9 December 2024 [Page 40] Internet-Draft CDN Interconnect Triggers June 2024 6.2.7. Error Code This type is used by the dCDN to report failures in trigger processing. All Error Codes MUST be registered in the IANA "CDNI CI/ T Error Codes" registry (see Section 11.7). Unknown Error Codes MUST be treated as fatal errors, and the request MUST NOT be automatically retried without modification. The following Error Codes are defined by this document and MUST be supported by an implementation of the CI/T interface utilizing the ci-trigger-command.trigger.v2 and the ci-trigger-status.v2 objects. +==============+====================================+==============+ | Error Code | Description | Registration | +==============+====================================+==============+ | emeta | The dCDN was unable to acquire | RFCthis | | | metadata required to fulfill the | | | | request. | | +--------------+------------------------------------+--------------+ | econtent | The dCDN was unable to acquire | RFCthis | | | content (CI/T "preposition" | | | | commands only). | | +--------------+------------------------------------+--------------+ | eperm | The uCDN does not have permission | RFCthis | | | to issue the CI/T Command (for | | | | example, the data is owned by | | | | another CDN). | | +--------------+------------------------------------+--------------+ | ereject | The dCDN is not willing to fulfill | RFCthis | | | the CI/T Command (for example, a | | | | "preposition" request for content | | | | at a time when the dCDN would not | | | | accept Request Routing requests | | | | from the uCDN). | | +--------------+------------------------------------+--------------+ | ecdn | An internal error in the dCDN or | RFCthis | | | one of its dCDNs. | | +--------------+------------------------------------+--------------+ | ecancelled | The uCDN cancelled the request. | RFCthis | +--------------+------------------------------------+--------------+ | eunsupported | The Trigger Specification | RFCthis | | | contained an "action type" that is | | | | not supported by the dCDN. No | | | | action was taken by the dCDN other | | | | than to create a Trigger Status | | | | Resource in state "failed". | | +--------------+------------------------------------+--------------+ | espec | An error occurred while parsing a | RFCthis | Sopher, et al. Expires 9 December 2024 [Page 41] Internet-Draft CDN Interconnect Triggers June 2024 | | generic trigger spec, or that the | | | | specific trigger spec is not | | | | supported by the CDN. | | +--------------+------------------------------------+--------------+ | esubject | An error occurred while parsing a | RFCthis | | | trigger subject, or that the | | | | specific trigger subject is not | | | | supported by the CDN. | | +--------------+------------------------------------+--------------+ | eextension | An error occurred while parsing a | RFCthis | | | generic trigger extension, or that | | | | the specific extension is not | | | | supported by the CDN. | | +--------------+------------------------------------+--------------+ Table 8 7. Trigger Spec Objects The objects defined below are intended to be used in the GenericTriggerSpec object's generic-trigger-spec-value field as defined in Section Section 6.2.2.1. As such all these trigger specs are registered in the IANA "CDNI CI/T Trigger Specs" registry (see Section 11.3). 7.1. URLs Spec The urls spec type allows the uCDN to manage uCDN content or metadata objects held by the dCDN based on the objects' URLs. Spec object specification Property: urls Description: An array of URLs over which the trigger MUST be executed. Value: A JSON array of URLs represented as JSON strings. Mandatory: Yes. Below is an example of a JSON serialized generic trigger spec object, matching the metadata at metadata.example.com/a/b/c. Sopher, et al. Expires 9 December 2024 [Page 42] Internet-Draft CDN Interconnect Triggers June 2024 { "trigger-subject": "metadata", "generic-trigger-spec-type": "urls", "generic-trigger-spec-value": { "urls": [ "https://metadata.example.com/a/b/c" ] } } 7.2. CCIDs Spec The content-ccids spec type allows the uCDN to specify the Content Collection IDentifier of content to which the trigger applies. The "ccid" is a grouping of content as defined by [RFC8006]. The ccid spec type is valid only for the content spec subject (see Section 3.2.1). Spec object specification Property: ccids Description: An array of Content Collection IDentifiers over which the trigger MUST be executed. Value: A JSON array of strings, where each string is a Content Collection IDentifier. Mandatory: Yes. 7.3. URI Pattern Match Spec The uri-pattern match spec type allows the uCDN to manage uCDN content or metadata objects held by the dCDN based on the objects' URI pattern. The value is a UriPatternMatch object, as defined in Section 7.3.1. 7.3.1. UriPatternMatch A UriPatternMatch consists of a string pattern to match against a URI, and flags describing the type of match. It is encoded as a JSON object with the following name/value pairs: Name: pattern Description: A pattern for URI matching. Sopher, et al. Expires 9 December 2024 [Page 43] Internet-Draft CDN Interconnect Triggers June 2024 Value: A JSON string representing the pattern. The pattern can contain the wildcards * and ?, where * matches any sequence of [RFC3986] pchar or "/" characters (including the empty string) and ? matches exactly one [RFC3986] pchar character. The three literals $, * and ? MUST be escaped as $$, $* and $? (where $ is the designated escape character). All other characters are treated as literals. Mandatory: Yes. Name: case-sensitive Description: Flag indicating whether or not case-sensitive matching should be used. Value: One of the JSON values "true" (the matching is case sensitive) or "false" (the matching is case insensitive). Mandatory: No; default is "false", i.e., a case-insensitive match. Name: match-query-string Description: Flag indicating whether to include the query part of the URI when comparing against the pattern. Value: One of the JSON values "true" (the full URI, including the query part, should be compared against the given pattern) or "false" (the query part of the URI should be dropped before comparison with the given pattern). Mandatory: No; default is "false". The query part of the URI should be dropped before comparison with the given pattern. Example of case-sensitive prefix match against "https://www.example.com/trailers/": { "pattern": "https://www.example.com/trailers/*", "case-sensitive": true } 7.4. URI Regex Match Spec The content-uri-regexes spec type allows the uCDN to manage content or metadata objects held by the dCDN based on the objects' URI regex. Sopher, et al. Expires 9 December 2024 [Page 44] Internet-Draft CDN Interconnect Triggers June 2024 7.4.1. RegexMatch A RegexMatch consists of a regular expression string a URI is matched against, and flags describing the type of match. It is encoded as a JSON object with following properties: Property: regex Description: A regular expression for URI matching. Type: A regular expression to match against the URI, i.e., against the path-absolute and the query string parameters [RFC3986]. The regular expression string MUST be compatible with POSIX [POSIX.1] Section 9 Extended Regular Expressions. This regular expression MUST be evaluated in the POSIX locale (POSIX [POSIX.1] Section 7.2). Note: Because '\' has a special meaning in JSON [RFC8259] as the escape character within JSON strings, the regular expression character '\' MUST be escaped as '\\'. Mandatory: Yes. Property: case-sensitive Description: Flag indicating whether or not case-sensitive matching should be used. Type: JSON boolean. Either "true" (the matching is case sensitive) or "false" (the matching is case insensitive). Mandatory: No; default is "false", i.e., a case-insensitive match. Property: match-query-string Description: Flag indicating whether to include the query part of the URI when comparing against the regex. Type: JSON boolean. Either "true" (the full URI, including the query part, should be compared against the regex) or "false" (the query part of the URI should be dropped before comparison with the given regex). Mandatory: No; default is "false". The query part of the URI MUST be dropped before comparison with the given regex. This makes the regular expression simpler and safer for cases in which the query parameters are not relevant for the match. Sopher, et al. Expires 9 December 2024 [Page 45] Internet-Draft CDN Interconnect Triggers June 2024 Example of a case sensitive, no query parameters, regex match against: "^(https:\/\/video\.example\.com)\/([a-z])\/ movie1\/([1-7])\/*(index.m3u8|\d{3}.ts)$" { "regex": "^(https:\\/\\/video\\.example\\.com)\\/([a-z])\\/movie1\ \/([1-7])\\/*(index.m3u8|\\d{3}.ts)$", "case-sensitive": true, "match-query-string": false } This regex matches URLs of domain video.example.com where the path structure is /(single lower case letter)/(name-of-title)/(single digit between 1 to 7)/(index.m3u8 or a 3 digit number with ts extension). For example: https://video.example.com/d/movie1/5/index.m3u8 or https://video.example.com/k/movie1/4/013.ts 7.5. Content Playlist Spec The content-playlist spec type allows the uCDN to manage content held by the dCDN based on the content's playlist. The content-playlist spec type is valid only for the content spec subject (see Section 3.2.1). 7.5.1. Playlist A Playlist consists of a full URL and a media protocol identifier. An implementation that supports a specific playlist media protocol MUST be able to parse playlist files of that protocol type and extract, possibly recursively, the URLs to all media objects and/or sub playlist files, and apply the trigger to each one of them separately. Playlist is encoded as a JSON object with following properties: Property: playlist Description: A URL to the playlist file. Type: A URL represented as a JSON string. Mandatory: Yes. Sopher, et al. Expires 9 December 2024 [Page 46] Internet-Draft CDN Interconnect Triggers June 2024 Property: media-protocol Description: Media protocol to be used when parsing and interpreting this playlist. Type: MediaProtocol (see Section 7.5.2). Mandatory: Yes. Example of a JSON serialized HLS playlist object: { "playlist": "https://www.example.com/hls/title/index.m3u8", "media-protocol": "hls" } 7.5.2. MediaProtocol Media Protocol objects are used to specify registered type of media protocol (see Section 11.5) used for protocol related operations like pre-position according to playlist. The following table defines the initial MediaProtocol JSON string values corresponding to the HLS, MSS, and DASH protocols: +========+==================+===============+===============+ | JSON | Description | Specification | Protocol | | string | | | Specification | +========+==================+===============+===============+ | hls | HTTP Live | RFCthis | RFC 8216 | | | Streaming | | [RFC8216] | +--------+------------------+---------------+---------------+ | mss | Microsoft Smooth | RFCthis | MSS [MSS] | | | Streaming | | | +--------+------------------+---------------+---------------+ | dash | Dynamic Adaptive | RFCthis | MPEG-DASH | | | Streaming over | | [MPEG-DASH] | | | HTTP (MPEG-DASH) | | | +--------+------------------+---------------+---------------+ Table 9 [RFC Editor: Please replace RFCthis with the published RFC number for this document.] Sopher, et al. Expires 9 December 2024 [Page 47] Internet-Draft CDN Interconnect Triggers June 2024 8. Trigger Extension Objects The objects defined below are intended to be used in the GenericTriggerExtension object's generic-trigger-extension-value field as defined in Section 6.2.3.2, and their generic-trigger- extension-type property MUST be set to the appropriate Extension Type as defined in Section 3.3 . 8.1. LocationPolicy extension A content operation may be relevant for a specific geographical region, or need to be excluded from a specific region. In this case, the trigger should be applied only to parts of the network that are either "included" or "not excluded" by the location policy. Note that the restrictions here are on the cache location rather than the client location. The LocationPolicy object defines which CDN or cache locations for which the trigger command is relevant. Example use cases: * Pre-position: Certain contracts allow for pre-positioning or availability of contract in all regions except for certain excluded regions in the world, including caches. For example, some content cannot ever knowingly touch servers in a specific country, including cached content. Therefore, these regions MUST be excluded from a pre-positioning operation. * Purge: In certain cases, content may have been located on servers in regions where the content must not reside. In such cases, a purge operation to remove content specifically from that region is required. Object specification Property: locations Description: An Access List that allows or denies (blocks) the trigger execution per cache location. Type: Array of LocationRule objects (see Section 4.2.2.1 of [RFC8006]) Mandatory: Yes. Sopher, et al. Expires 9 December 2024 [Page 48] Internet-Draft CDN Interconnect Triggers June 2024 If a location policy object is not listed within the trigger command, the default behavior is to execute the trigger in all available caches and locations of the dCDN. The trigger command is allowed, or denied, for a specific cache location according to the action of the first location whose footprint matches against that cache's location. If two or more footprints overlap, the first footprint that matches against the cache's location determines the action a CDN MUST take. If the "locations" property is an empty list or if none of the listed footprints match the location of a specific cache location, then the result is equivalent to a "deny" action. Following is an example of a JSON serialized generic trigger extension object containing a location policy object that allows the trigger execution in the US but blocks its execution in Canada: { "generic-trigger-extension-type": "location-policy", "generic-trigger-extension-value": { "locations": [ { "action": "allow", "footprints": [ { "footprint-type": "countrycode", "footprint-value": ["us"] } ] }, { "action": "deny", "footprints": [ { "footprint-type": "countrycode", "footprint-value": ["ca"] } ] } ] }, "mandatory-to-enforce": true, "safe-to-redistribute": true, "incomprehensible": false } Sopher, et al. Expires 9 December 2024 [Page 49] Internet-Draft CDN Interconnect Triggers June 2024 8.2. TimePolicy Extension A uCDN may wish to perform content management operations on the dCDN on a specific schedule. The TimePolicy extensions allows the uCDN to instruct the dCDN to execute the trigger command in a desired time window. For example, a content provider that wishes to pre-populate a new episode at off-peak time so that it would be ready on caches at prime time when the episode is released for viewing. A scheduled operation enables the uCDN to direct the dCDN in what time frame to execute the trigger. A uCDN may wish to schedule a trigger such that the dCDN will execute it in local time, as it is measured in each region. For example, a uCDN may wish the dCDN to pull the content at off-peak hours, between 2AM-4AM, however, as a CDN is distributed across multiple time zones, the UTC definition of 2AM depends on the actual location. We define two alternatives for localized scheduling: * Regional schedule: When used in conjunction with the Location Policy defined in Section 8.1, the uCDN can trigger separate commands for different geographical regions, for each region using a different schedule. This allows the uCDN to control the execution time per region. * Local Time schedule: We introduce a "local time" version for Internet timestamps that follows the notation for local time as defined in Section 4.2.2 of [ISO8601]. When local time is used, that dCDN SHOULD execute the triggers at different absolute times, according the local time of each execution location. Object specification Property: unix-time-window Description: A UNIX epoch time window in which the trigger SHOULD be executed. Type: TimeWindow object using UNIX epoch timestamps (see Section 4.2.3.2 of [RFC8006]) Mandatory: No, but exactly one of "unixEpochWindow", "utcWindow" or "localTimeWindow" MUST be present. Property: utc-window Description: A UTC time window in which the trigger SHOULD be executed. Sopher, et al. Expires 9 December 2024 [Page 50] Internet-Draft CDN Interconnect Triggers June 2024 Type: UTCWindow object as defined in Section 8.2.1. Mandatory: No, but exactly one of "unixEpochWindow", "utcWindow" or "localTimeWindow" MUST be present. If a time policy object is not listed within the trigger command, the default behavior is to execute the trigger in a time frame most suitable to the dCDN taking under consideration other constraints and / or obligations. Example of a JSON serialized generic trigger extension object containing a time policy object that schedules the trigger execution to a window between 09:00 01/01/2000 UTC and 17:00 01/01/2000 UTC, using the "unix-time-window" property: { "generic-trigger-extension-type": "time-policy", "generic-trigger-extension-value": { "unix-time-window": { "start": 946717200, "end": 946746000 } }, "mandatory-to-enforce": true, "safe-to-redistribute": true, "incomprehensible": false } 8.2.1. UTCWindow A UTCWindow object describes a time range in UTC or UTC and a zone offset that can be applied by a TimePolicy. Property: start Description: The start time of the window. Type: Internet date and time as defined in [RFC3339]. Mandatory: No, but at least one of "start" or "end" MUST be present and non-empty. Property: end Description: The end time of the window. Type: Internet date and time as defined in [RFC3339]. Sopher, et al. Expires 9 December 2024 [Page 51] Internet-Draft CDN Interconnect Triggers June 2024 Mandatory: No, but at least one of "start" or "end" MUST be present and non-empty. Example JSON serialized UTCWindow object that describes a time window from 02:30 01/01/2000 UTC to 04:30 01/01/2000 UTC: { "start": "2000-01-01T02:30:00.00Z", "end": "2000-01-01T04:30:00.00Z" } Example JSON serialized UTCWindow object that describes a time window in New York time zone offset UTC-05:00 from 02:30 01/01/2000 to 04:30 01/01/2000: { "start": "2000-01-01T02:30:00.00-05:00", "end": "2000-01-01T04:30:00.00-05:00" } 9. Footprint and Capabilities This section covers the FCI objects required for advertisement of the specs, extensions, and properties introduced in this document. 9.1. CI/T Objects Versions Capability Object The CI/T objects versions capability object is used to indicate support for one or more CI/T objects versions. Capability type is "FCI.CITObjectsVersion". For simplicity, it is recommended to minimize the set of supported versions declared by the dCDN. For example, one way to minimize supported versions is to support only objects of version 2. Version 1, as originally defined in [RFC8007], is the default if this capability is not explicitly declared. Property: versions Description: A list of version numbers. Type: An array of JSON strings Mandatory: No. The default is version 1. A missing or an empty versions list means that only version 1 of the interface and objects is supported. Sopher, et al. Expires 9 December 2024 [Page 52] Internet-Draft CDN Interconnect Triggers June 2024 9.1.1. CI/T Objects Versions Capability Object Serialization The following shows an example of CI/T Objects Versions Capability object serialization for a dCDN that supports versions 2 and 2.1 of the CI/T interface. { "capabilities": [ { "capability-type": "FCI.CITVersion", "capability-value": { "versions": [ "1", "2", "2.1" ] }, "footprints": [ ] } ] } 9.2. CI/T Trigger Scope Capability Object The CI/T supports several trigger actions for different trigger's subjects as defined at Section 3.1 and Section 3.2.1. Additional actions, as well as subjects, may be defined in the future. The Trigger Scope capability object is used to indicate support of a Trigger Action for a subject. It further specifies the Trigger Generic Spec types that may be used for selecting the targets the triggers are applied on, along with the supported Trigger Generic Extension types. The trigger-scope-capability object matching the "FCI.TriggerScope" capability type, is defined as follows: Property: trigger-action Description: The supported CDNI CI/T Trigger Action. Type: A string corresponding to an entry from the "CDNI CI/T Trigger Types" registry Section 11.2, that corresponds to a CDNI CI/T Trigger Action. Mandatory: Yes. Property: trigger-subject Description: The supported CDNI CI/T Trigger Subject. Sopher, et al. Expires 9 December 2024 [Page 53] Internet-Draft CDN Interconnect Triggers June 2024 Type: A string corresponding to an entry from the "CDNI CI/T Trigger Subjects" registry Section 11.4 that corresponds to a CDNI CI/T Trigger Subject. Mandatory: Yes. Property: trigger-specs Description: A list of supported CDNI CI/T GenericSpecObject types for the Trigger Action and Subject. Type: List of strings corresponding to entries from the "CDNI CI/T Trigger Specs" registry Section 11.3, that corresponds to a CDNI CI/T GenericSpecObject objects. Mandatory: No. The default, in case of a missing or an empty list, MUST be interpreted as "no GenericExtensionObject types are supported". A non-empty list MUST be interpreted as containing "the only GenericExtensionObject types that are supported". Property: trigger-extensions Description: A list of supported CDNI CI/T GenericExtensionObject types for the Trigger Action and Subject. Type: List of strings corresponding to entries from the "CDNI CI/T Trigger Extension" registry Section 11.6, that corresponds to a CDNI CI/T GenericExtensionObject objects. Mandatory: No. The default, in case of a missing or an empty list, MUST be interpreted as "no GenericExtensionObject types are supported". A non-empty list MUST be interpreted as containing "the only GenericExtensionObject types that are supported". 9.2.1. CI/T Trigger Scope Capability Object Serialization The following shows an example of a JSON serialized CI/T Trigger Scope Capability object serialization for a dCDN that supports the preposition and invalidation of content, using "urls" and "ccids" Generic Spec types, with "time-policy" but only for the "preposition" action. Note that in this example, purge is not supported neigher any operation on metadata. Sopher, et al. Expires 9 December 2024 [Page 54] Internet-Draft CDN Interconnect Triggers June 2024 { "capabilities": [ { "capability-type": "FCI.TriggerScope", "capability-value": { "trigger-scope-capabilities": [ { "trigger-action": "preposition", "trigger-subject": "content", "trigger-specs": ["urls", "ccids"], "trigger-extensions": ["time-policy"] }, { "trigger-action": "invalidate", "trigger-subject": "content", "trigger-specs": ["urls", "ccids"] } ] }, "footprints": [ ] } ] } 9.3. CI/T Playlist Protocol Capability Object Given a content-playlist being supported by the dCDN, the CI/T Playlist Protocol capability object is used to indicate support for one or more MediaProtocol types listed in Section 11.5 by the playlists property of the "trigger.v2" object. Capability type is "FCI.TriggerSpecPlaylistProtocol". Property: media-protocols Description: A list of media protocols. Type: A list of MediaProtocol (from the CDNI Triggers media protocol types Section 11.5) Mandatory: No. The default, in case of a missing or an empty list, is none supported. Sopher, et al. Expires 9 December 2024 [Page 55] Internet-Draft CDN Interconnect Triggers June 2024 9.3.1. CI/T Playlist Protocol Capability Object Serialization The following shows an example of a JSON serialized CI/T Playlist Protocol Capability object serialization for a dCDN that supports "hls" and "dash". { "capabilities": [ { "capability-type": "FCI.TriggerSpecPlaylistProtocol", "capability-value": { "media-protocols": ["hls", "dash"] }, "footprints": [ ] } ] } 10. Examples The following subsections provide examples of different CI/T objects encoded as JSON. Discovery of the CI/T interface is out of scope for this document. In an implementation, all CI/T URLs are under the control of the dCDN. The uCDN MUST NOT attempt to ascribe any meaning to individual elements of the path. In examples in this section, the URL "https://dcdn.example.com/ triggers" is used as the location of the collection of all Trigger Status Resources, and the CDN PID of the uCDN is "AS64496:1". 10.1. Creating Triggers Examples of the uCDN triggering activity in the dCDN: 10.1.1. Preposition Below is an example of a CI/T "preposition" command -- a POST to the collection of all Trigger Status Resources. Note that pattern based specs like "UriPatternMatch" and "UrisRegexMatch", are not allowed in a pre-position Trigger Specification, where the dCDN has to have a clear list of objects to obtain. Sopher, et al. Expires 9 December 2024 [Page 56] Internet-Draft CDN Interconnect Triggers June 2024 REQUEST: POST /triggers HTTP/1.1 User-Agent: example-user-agent/0.1 Host: dcdn.example.com Accept: */* Content-Type: application/cdni; ptype=ci-trigger-command.trigger.v2 Content-Length: 352 { "trigger": { "action": "preposition", "specs": [ { "trigger-subject": "metadata", "generic-trigger-spec-type": "urls", "generic-trigger-spec-value": { "urls": [ "https://metadata.example.com/a/b/c" ] } }, { "trigger-subject": "content", "generic-trigger-spec-type": "urls", "generic-trigger-spec-value": { "urls": [ "https://www.example.com/a/b/c/1", "https://www.example.com/a/b/c/2", "https://www.example.com/a/b/c/3", "https://www.example.com/a/b/c/4" ] } } ], }, "cdn-path": [ "AS64496:1" ] } RESPONSE: HTTP/1.1 201 Created Date: Wed, 04 May 2016 08:48:10 GMT Content-Length: 467 Content-Type: application/cdni; ptype=ci-trigger-status.v2 Location: https://dcdn.example.com/triggers/0 Server: example-server/0.1 Sopher, et al. Expires 9 December 2024 [Page 57] Internet-Draft CDN Interconnect Triggers June 2024 { "ctime": 1462351690, "etime": 1462351698, "mtime": 1462351690, "status": "pending", "trigger": { "action": "preposition" "specs": [ { "trigger-subject": "metadata", "generic-trigger-spec-type": "urls", "generic-trigger-spec-value": { "urls": [ "https://metadata.example.com/a/b/c" ] } }, { "trigger-subject": "content", "generic-trigger-spec-type": "urls", "generic-trigger-spec-value": { "urls": [ "https://www.example.com/a/b/c/1", "https://www.example.com/a/b/c/2", "https://www.example.com/a/b/c/3", "https://www.example.com/a/b/c/4" ] } } ] } } 10.1.2. Invalidate Below is an example of a CI/T "invalidate" command -- another POST to the collection of all Trigger Status Resources. This instructs the dCDN to revalidate the content at "https://www.example.com/a/ index.html", as well as any metadata and content whose URLs are prefixed by "https://metadata.example.com/a/b/" using case- insensitive matching, and "https://www.example.com/a/b/" using case- sensitive matching, respectively. Sopher, et al. Expires 9 December 2024 [Page 58] Internet-Draft CDN Interconnect Triggers June 2024 REQUEST: POST /triggers HTTP/1.1 User-Agent: example-user-agent/0.1 Host: dcdn.example.com Accept: */* Content-Type: application/cdni; ptype=ci-trigger-command.trigger.v2 Content-Length: 387 { "trigger": { "action": "invalidate", "specs": [ { "trigger-subject": "metadata", "generic-trigger-spec-type": "uri-pattern-match", "generic-trigger-spec-value": { "pattern": "https://metadata.example.com/a/b/*" } }, { "trigger-subject": "content", "generic-trigger-spec-type": "urls", "generic-trigger-spec-value": { "urls": [ "https://www.example.com/a/index.html" ] } }, { "trigger-subject": "content", "generic-trigger-spec-type": "uri-pattern-match", "generic-trigger-spec-value": { "pattern": "https://www.example.com/a/b/*", "case-sensitive": true } } ] }, "cdn-path": [ "AS64496:1" ] } RESPONSE: HTTP/1.1 201 Created Date: Wed, 04 May 2016 08:48:11 GMT Content-Length: 545 Content-Type: application/cdni; ptype=ci-trigger-status.v2 Sopher, et al. Expires 9 December 2024 [Page 59] Internet-Draft CDN Interconnect Triggers June 2024 Location: https://dcdn.example.com/triggers/1 Server: example-server/0.1 { "ctime": 1462351691, "etime": 1462351699, "mtime": 1462351691, "status": "pending", "trigger": { "action": "invalidate", "specs": [ { "trigger-subject": "metadata", "generic-trigger-spec-type": "uri-pattern-match", "generic-trigger-spec-value": { "pattern": "https://metadata.example.com/a/b/*" } }, { "trigger-subject": "content", "generic-trigger-spec-type": "urls", "generic-trigger-spec-value": { "urls": [ "https://www.example.com/a/index.html" ] } }, { "trigger-subject": "content", "generic-trigger-spec-type": "uri-pattern-match", "generic-trigger-spec-value": { "pattern": "https://www.example.com/a/b/*", "case-sensitive": true } } ] } } 10.1.3. Invalidation with Regex In the following example a CI/T "invalidate" command uses the Regex property to specify the range of content objects for invalidation, the command is rejected by the dCDN due to regex complexity, and an appropriate error is reflected in the status response. Sopher, et al. Expires 9 December 2024 [Page 60] Internet-Draft CDN Interconnect Triggers June 2024 REQUEST: POST /triggers HTTP/1.1 User-Agent: example-user-agent/0.1 Host: triggers.dcdn.example.com Accept: */* Content-Type: application/cdni; ptype=ci-trigger-command.trigger.v2 { "trigger": { "action": "invalidate", "specs": [ { "trigger-subject": "content", "generic-trigger-spec-type": "uri-regex-match", "generic-trigger-spec-value": { "regex": "^(https:\\/\\/video\\.example\\.com)\\/ ([a-z])\\/movie1\\/([1-7])\\/*(index.m3u8|\\d{3}.ts)$", "case-sensitive": true, "match-query-string": false } } ] }, "cdn-path": [ "AS64496:0" ] } RESPONSE: HTTP/1.1 201 Created Date: Wed, 04 May 2016 08:48:10 GMT Content-Length: 467 Content-Type: application/cdni; ptype=ci-trigger-status.v2 Location: https://triggers.dcdn.example.com/triggers/2 Server: example-server/0.1 { "errors": [ { "specs": [ { "trigger-subject": "content", "generic-trigger-spec-type": "uri-regex-match", "generic-trigger-spec-value": { "regex": "^(https:\\/\\/video\\.example\\.com)\\/ ([a-z])\\/movie1\\/ ([1-7])\\/*(index.m3u8|\\d{3}.ts)$", "case-sensitive": true, "match-query-string": false Sopher, et al. Expires 9 December 2024 [Page 61] Internet-Draft CDN Interconnect Triggers June 2024 } } ], "description": "The dCDN rejected a regex due to complexity", "error": "ereject", "cdn": "AS64500:0" } ], "ctime": 1462351690, "etime": 1462351698, "mtime": 1462351690, "status": "failed", "trigger": { } } 10.1.4. Preposition with Playlists In the following example a CI/T "preposition" command uses the Playlist property to specify the full media library of a specific content. The command fails due to playlist parse error and an appropriate error is reflected in the status response. REQUEST: POST /triggers HTTP/1.1 User-Agent: example-user-agent/0.1 Host: triggers.dcdn.example.com Accept: */* Content-Type: application/cdni; ptype=ci-trigger-command.trigger.v2 { "trigger": { "action": "preposition", "specs": [ { "trigger-subject": "content", "generic-trigger-spec-type": "contentPlaylist", "generic-trigger-spec-value": { "playlist": "https://www.example.com/hls/title/index.m3u8", "media-protocol": "hls" } } ] }, "cdn-path": [ "AS64496:0" ] } RESPONSE: Sopher, et al. Expires 9 December 2024 [Page 62] Internet-Draft CDN Interconnect Triggers June 2024 HTTP/1.1 201 Created Date: Wed, 04 May 2016 08:48:10 GMT Content-Length: 467 Content-Type: application/cdni; ptype=ci-trigger-status.v2 Location: https://triggers.dcdn.example.com/triggers/3 Server: example-server/0.1 { "errors": [ { "specs": [ { "trigger-subject": "content", "generic-trigger-spec-type": "contentPlaylist", "generic-trigger-spec-value": { "playlist": "https://www.example.com/hls/title/index.m3u8", "media-protocol": "hls" } } ], "description": "The dCDN was not able to parse the playlist", "error": "econtent", "cdn": "AS64500:0" } ], "ctime": 1462351690, "etime": 1462351698, "mtime": 1462351690, "status": "failed", "trigger": { } } 10.2. Examining Trigger Status Once Trigger Status Resources have been created, the uCDN can check their status as shown in the following examples. 10.2.1. Collection of All Triggers The uCDN can fetch the collection of all Trigger Status Resources it has created that have not yet been deleted or removed or expired. After creation of the "preposition" and "invalidate" triggers shown above, this collection might look as follows: Sopher, et al. Expires 9 December 2024 [Page 63] Internet-Draft CDN Interconnect Triggers June 2024 REQUEST: GET /triggers HTTP/1.1 User-Agent: example-user-agent/0.1 Host: dcdn.example.com Accept: */* RESPONSE: HTTP/1.1 200 OK Content-Length: 341 Expires: Wed, 04 May 2016 08:49:11 GMT Server: example-server/0.1 ETag: "-936094426920308378" Cache-Control: max-age=60 Date: Wed, 04 May 2016 08:48:11 GMT Content-Type: application/cdni; ptype=ci-trigger-collection { "cdn-id": "AS64496:0", "coll-active": "/triggers/active", "coll-complete": "/triggers/complete", "coll-failed": "/triggers/failed", "coll-pending": "/triggers/pending", "staleresourcetime": 86400, "triggers": [ "https://dcdn.example.com/triggers/0", "https://dcdn.example.com/triggers/1" ] } 10.2.2. Filtered Collections of Trigger Status Resources The filtered collections are also available to the uCDN. Before the dCDN starts processing the two CI/T Trigger Commands shown above, both will appear in the collection of pending triggers. For example: Sopher, et al. Expires 9 December 2024 [Page 64] Internet-Draft CDN Interconnect Triggers June 2024 REQUEST: GET /triggers/pending HTTP/1.1 User-Agent: example-user-agent/0.1 Host: dcdn.example.com Accept: */* RESPONSE: HTTP/1.1 200 OK Content-Length: 152 Expires: Wed, 04 May 2016 08:49:11 GMT Server: example-server/0.1 ETag: "4331492443626270781" Cache-Control: max-age=60 Date: Wed, 04 May 2016 08:48:11 GMT Content-Type: application/cdni; ptype=ci-trigger-collection { "staleresourcetime": 86400, "triggers": [ "https://dcdn.example.com/triggers/0", "https://dcdn.example.com/triggers/1" ] } At this point, if no other Trigger Status Resources had been created, the other filtered views would be empty. For example: Sopher, et al. Expires 9 December 2024 [Page 65] Internet-Draft CDN Interconnect Triggers June 2024 REQUEST: GET /triggers/complete HTTP/1.1 User-Agent: example-user-agent/0.1 Host: dcdn.example.com Accept: */* RESPONSE: HTTP/1.1 200 OK Content-Length: 54 Expires: Wed, 04 May 2016 08:49:11 GMT Server: example-server/0.1 ETag: "7958041393922269003" Cache-Control: max-age=60 Date: Wed, 04 May 2016 08:48:11 GMT Content-Type: application/cdni; ptype=ci-trigger-collection { "staleresourcetime": 86400, "triggers": [] } 10.2.3. Individual Trigger Status Resources The Trigger Status Resources can also be examined for details about individual CI/T Trigger Commands. For example, for the CI/T "preposition" and "invalidate" commands from previous examples: REQUEST: GET /triggers/0 HTTP/1.1 User-Agent: example-user-agent/0.1 Host: dcdn.example.com Accept: */* RESPONSE: HTTP/1.1 200 OK Content-Length: 467 Expires: Wed, 04 May 2016 08:49:10 GMT Server: example-server/0.1 ETag: "6990548174277557683" Cache-Control: max-age=60 Date: Wed, 04 May 2016 08:48:10 GMT Content-Type: application/cdni; ptype=ci-trigger-status.v2 { Sopher, et al. Expires 9 December 2024 [Page 66] Internet-Draft CDN Interconnect Triggers June 2024 "ctime": 1462351690, "etime": 1462351698, "mtime": 1462351690, "status": "pending", "trigger": { "action": "preposition", "specs": [ { "trigger-subject": "metadata", "generic-trigger-spec-type": "urls", "generic-trigger-spec-value": { "urls": [ "https://metadata.example.com/a/b/c" ] } }, { "trigger-subject": "content", "generic-trigger-spec-type": "urls", "generic-trigger-spec-value": { "urls": [ "https://www.example.com/a/b/c/1", "https://www.example.com/a/b/c/2", "https://www.example.com/a/b/c/3", "https://www.example.com/a/b/c/4" ] } } ] } } REQUEST: GET /triggers/1 HTTP/1.1 User-Agent: example-user-agent/0.1 Host: dcdn.example.com Accept: */* RESPONSE: HTTP/1.1 200 OK Content-Length: 545 Expires: Wed, 04 May 2016 08:49:11 GMT Server: example-server/0.1 ETag: "-554385204989405469" Cache-Control: max-age=60 Date: Wed, 04 May 2016 08:48:11 GMT Sopher, et al. Expires 9 December 2024 [Page 67] Internet-Draft CDN Interconnect Triggers June 2024 Content-Type: application/cdni; ptype=ci-trigger-status.v2 { "ctime": 1462351691, "etime": 1462351699, "mtime": 1462351691, "status": "pending", "trigger": { "action": "invalidate", "specs": [ { "trigger-subject": "metadata", "generic-trigger-spec-type": "uri-pattern-match", "generic-trigger-spec-value": { "pattern": "https://metadata.example.com/a/b/*" } }, { "trigger-subject": "content", "generic-trigger-spec-type": "urls", "generic-trigger-spec-value": { "urls": [ "https://www.example.com/a/index.html" ] } }, { "trigger-subject": "content", "generic-trigger-spec-type": "uri-pattern-match", "generic-trigger-spec-value": { "pattern": "https://www.example.com/a/b/*", "case-sensitive": true } } ] } } 10.2.4. Polling for Changes in Status The uCDN SHOULD use the ETags of collections or Trigger Status Resources when polling for changes in status, as shown in the following examples: Sopher, et al. Expires 9 December 2024 [Page 68] Internet-Draft CDN Interconnect Triggers June 2024 REQUEST: GET /triggers/pending HTTP/1.1 User-Agent: example-user-agent/0.1 Host: dcdn.example.com Accept: */* If-None-Match: "4331492443626270781" RESPONSE: HTTP/1.1 304 Not Modified Content-Length: 0 Expires: Wed, 04 May 2016 08:49:11 GMT Server: example-server/0.1 ETag: "4331492443626270781" Cache-Control: max-age=60 Date: Wed, 04 May 2016 08:48:11 GMT Content-Type: application/cdni; ptype=ci-trigger-collection REQUEST: GET /triggers/0 HTTP/1.1 User-Agent: example-user-agent/0.1 Host: dcdn.example.com Accept: */* If-None-Match: "6990548174277557683" RESPONSE: HTTP/1.1 304 Not Modified Content-Length: 0 Expires: Wed, 04 May 2016 08:49:10 GMT Server: example-server/0.1 ETag: "6990548174277557683" Cache-Control: max-age=60 Date: Wed, 04 May 2016 08:48:10 GMT Content-Type: application/cdni; ptype=ci-trigger-status.v2 When the CI/T Trigger Command is complete, the contents of the filtered collections will be updated along with their ETags. For example, when the two example CI/T Trigger Commands are complete, the collections of pending and complete Trigger Status Resources might look like: Sopher, et al. Expires 9 December 2024 [Page 69] Internet-Draft CDN Interconnect Triggers June 2024 REQUEST: GET /triggers/pending HTTP/1.1 User-Agent: example-user-agent/0.1 Host: dcdn.example.com Accept: */* RESPONSE: HTTP/1.1 200 OK Content-Length: 54 Expires: Wed, 04 May 2016 08:49:15 GMT Server: example-server/0.1 ETag: "1337503181677633762" Cache-Control: max-age=60 Date: Wed, 04 May 2016 08:48:15 GMT Content-Type: application/cdni; ptype=ci-trigger-collection { "staleresourcetime": 86400, "triggers": [] } REQUEST: GET /triggers/complete HTTP/1.1 User-Agent: example-user-agent/0.1 Host: dcdn.example.com Accept: */* RESPONSE: HTTP/1.1 200 OK Content-Length: 152 Expires: Wed, 04 May 2016 08:49:22 GMT Server: example-server/0.1 ETag: "4481489539378529796" Cache-Control: max-age=60 Date: Wed, 04 May 2016 08:48:22 GMT Content-Type: application/cdni; ptype=ci-trigger-collection { "staleresourcetime": 86400, "triggers": [ "https://dcdn.example.com/triggers/0", "https://dcdn.example.com/triggers/1" ] } Sopher, et al. Expires 9 December 2024 [Page 70] Internet-Draft CDN Interconnect Triggers June 2024 10.2.5. Deleting Trigger Status Resources The uCDN can delete completed and failed Trigger Status Resources to reduce the size of the collections, as described in Section 5.4. For example, to delete the "preposition" request from earlier examples: REQUEST: DELETE /triggers/0 HTTP/1.1 User-Agent: example-user-agent/0.1 Host: dcdn.example.com Accept: */* RESPONSE: HTTP/1.1 204 No Content Date: Wed, 04 May 2016 08:48:22 GMT Content-Length: 0 Content-Type: text/html; charset=UTF-8 Server: example-server/0.1 This would, for example, cause the collection of completed Trigger Status Resources shown in the example above to be updated to: REQUEST: GET /triggers/complete HTTP/1.1 User-Agent: example-user-agent/0.1 Host: dcdn.example.com Accept: */* RESPONSE: HTTP/1.1 200 OK Content-Length: 105 Expires: Wed, 04 May 2016 08:49:22 GMT Server: example-server/0.1 ETag: "-6938620031669085677" Cache-Control: max-age=60 Date: Wed, 04 May 2016 08:48:22 GMT Content-Type: application/cdni; ptype=ci-trigger-collection { "staleresourcetime": 86400, "triggers": [ "https://dcdn.example.com/triggers/1" ] } Sopher, et al. Expires 9 December 2024 [Page 71] Internet-Draft CDN Interconnect Triggers June 2024 10.2.6. Extensions with Error Propagation In the following example a CI/T "preposition" command is using two extensions to control the way the trigger is executed. In this example the receiving dCDN, identified as "AS64500:0", does not support the first extension in the extensions array. dCDN "AS64500:0" further distributes this trigger to another downstream CDN that is identified as "AS64501:0", which does not support the second extension in the extensions array. The error is propagated from "AS64501:0" to "AS64500:0" and the errors.v2 array reflects both errors. REQUEST: POST /triggers HTTP/1.1 User-Agent: example-user-agent/0.1 Host: triggers.dcdn.example.com Accept: */* Content-Type: application/cdni; ptype=ci-trigger-command.trigger.v2 { "trigger": { "action": "preposition", "specs": [ { "trigger-subject": "content", "generic-trigger-spec-type": "contentPlaylist", "generic-trigger-spec-value": { "playlist": "https://www.example.com/hls/title/index.m3u8", "media-protocol": "hls" } } ], "extensions": [ { "generic-trigger-extension-type": "location-policy", "generic-trigger-extension-value": { "locations": [ { "action": "allow", "footprints": [ { "footprint-type": "countrycode", "footprint-value": [ "us" ] } ] Sopher, et al. Expires 9 December 2024 [Page 72] Internet-Draft CDN Interconnect Triggers June 2024 }, { "action": "deny", "footprints": [ { "footprint-type": "countrycode", "footprint-value": [ "ca" ] } ] } ] }, "mandatory-to-enforce": true, "safe-to-redistribute": true }, { "generic-trigger-extension-type": "time-policy", "generic-trigger-extension-value": { "unix-time-window": { "start": 946717200, "end": 946746000 } }, "mandatory-to-enforce": true, "safe-to-redistribute": true } ] }, "cdn-path": [ "AS64496:0" ] } RESPONSE: HTTP/1.1 201 Created Date: Wed, 04 May 2016 08:48:10 GMT Content-Length: 467 Content-Type: application/cdni; ptype=ci-trigger-status.v2 Location: https://triggers.dcdn.example.com/triggers/0 Server: example-server/0.1 { "errors": [ { "extensions": [ { "generic-trigger-extension-type": "location-policy", Sopher, et al. Expires 9 December 2024 [Page 73] Internet-Draft CDN Interconnect Triggers June 2024 "generic-trigger-extension-value": { "locations": [ { "action": "allow", "footprints": [ { "footprint-type": "countrycode", "footprint-value": [ "us" ] } ] }, { "action": "deny", "footprints": [ { "footprint-type": "countrycode", "footprint-value": [ "ca" ] } ] } ] }, "mandatory-to-enforce": true, "safe-to-redistribute": true } ], "description": "unrecognized extension ", "error": "eextension", "cdn": "AS64500:0" }, { "extensions": [ { "generic-trigger-extension-type": "time-policy", "generic-trigger-extension-value": { "unix-time-window": { "start": 946717200, "end": 946746000 } }, "mandatory-to-enforce": true, "safe-to-redistribute": true } ], Sopher, et al. Expires 9 December 2024 [Page 74] Internet-Draft CDN Interconnect Triggers June 2024 "description": "unrecognized extension ", "error": "eextension", "cdn": "AS64501:0" } ], "ctime": 1462351690, "etime": 1462351698, "mtime": 1462351690, "status": "failed", "trigger": { } } 11. IANA Considerations 11.1. CDNI Payload Type Parameter Registrations All references to RFC 8007 in the IANA registries should be replaced with references to this document, apart from references associated with the the following registrations: +=======================+===============+ | Payload Type | Specification | +=======================+===============+ | ci-trigger-command | RFC 8007 | +-----------------------+---------------+ | ci-trigger-status | RFC 8007 | +-----------------------+---------------+ | ci-trigger-collection | RFC 8007 | +-----------------------+---------------+ Table 10 The IANA is requested to register the following new Payload Types in the "CDNI Payload Types" registry defined by [RFC7736], for use with the "application/cdni" MIME media type. Sopher, et al. Expires 9 December 2024 [Page 75] Internet-Draft CDN Interconnect Triggers June 2024 +=================================+===============+ | Payload Type | Specification | +=================================+===============+ | ci-trigger-command.trigger.v2 | RFCthis | +---------------------------------+---------------+ | ci-trigger-command.cancel | RFCthis | +---------------------------------+---------------+ | ci-trigger-status.v2 | RFCthis | +---------------------------------+---------------+ | FCI.CITObjectsVersion | RFCthis | +---------------------------------+---------------+ | FCI.TriggerScope | RFCthis | +---------------------------------+---------------+ | FCI.TriggerSpecPlaylistProtocol | RFCthis | +---------------------------------+---------------+ Table 11 [RFC Editor: Please replace RFCthis with the published RFC number for this document.] 11.1.1. CDNI ci-trigger-command.trigger.v2 Payload Type Purpose: The purpose of this payload type is to distinguish version 2 of the CI/T trigger command object (and any associated capability advertisement) Interface: CI/T Encoding: see Section 6.1.1 11.1.2. CDNI ci-trigger-command.cancel Payload Type Purpose: The purpose of this payload type is to distinguish the CI/T cancel command object (and any associated capability advertisement) Interface: CI/T Encoding: see Section 6.1.2 11.1.3. CDNI ci-trigger-status.v2 Payload Type Purpose: The purpose of this payload type is to distinguish version 2 of the CI/T status resource response object (and any associated capability advertisement) Interface: CI/T Sopher, et al. Expires 9 December 2024 [Page 76] Internet-Draft CDN Interconnect Triggers June 2024 Encoding: see Section 6.1.3 11.1.4. CDNI FCI CI/T Payload Types 11.1.4.1. CDNI FCI CI/T Objects Versions Payload Type Purpose: The purpose of this payload type is to distinguish FCI advertisement objects for CI/T Objects Versions objects Interface: FCI Encoding: see Section 9.1.1 11.1.4.2. CDNI FCI CI/T Trigger Scope Payload Type Purpose: The purpose of this payload type is to distinguish FCI advertisement objects for CI/T Trigger Scope Interface: FCI Encoding: see Section 9.2.1 11.1.4.3. CDNI FCI CI/T Playlist Protocol Payload Type Purpose: The purpose of this payload type is to distinguish FCI advertisement objects for CI/T Playlist Protocol objects Interface: FCI Encoding: see Section 9.3.1 11.2. "CDNI CI/T Trigger Types" Registry For Trigger Actions In [RFC8007] the IANA was requested to create a new "CDNI CI/T Trigger Types" registry under the "Content Delivery Network Interconnection (CDNI) Parameters" registry group. Additions to the "CDNI CI/T Trigger Types" registry are made via the RFC Required policy as defined in [RFC8126]. In this second edition of the interface, trigger types are referred to as "trigger actions". The "Trigger Types" registry is used for actions definitions. Furthermore, this document, and specifically Section 3.1, reuses the definition of "trigger types" as defined in [RFC8007] as trigger actions, and provide their specifications, with no modification comparing to [RFC8007]. Sopher, et al. Expires 9 December 2024 [Page 77] Internet-Draft CDN Interconnect Triggers June 2024 11.3. "CDNI CI/T Trigger Specs" Registry The IANA is requested to create a new "CDNI CI/T Trigger Specs" registry in the "Content Delivery Networks Interconnection (CDNI) Parameters" registry group. The "CDNI CI/T Trigger Specs" namespace defines the valid trigger targets' spec values in Section 3.2, used by the Trigger Spec object. Additions to the "CDNI CI/T Trigger Specs" registry are made via the RFC Required policy as defined in [RFC8126]. The initial contents of the "CDNI CI/T Trigger Specs" registry comprise the names and descriptions listed in Section 3.2, with this document acting as the specification. 11.4. "CDNI CI/T Trigger Subjects" Registry The IANA is requested to create a new "CDNI CI/T Trigger Subjects" registry in the "Content Delivery Networks Interconnection (CDNI) Parameters" registry group. The "CDNI CI/T Trigger Subjects" namespace defines the valid trigger targets' subject values in Section 3.2.1, used by the Trigger Spec object. Additions to the "CDNI CI/T Trigger Subjects" registry are made via the RFC Required policy as defined in [RFC8126]. The initial contents of the "CDNI CI/T Trigger Subjects" registry comprise the names and descriptions listed in Section 3.2.1, with this document acting as the specification. 11.5. CDNI CI/T Playlist Spec MediaProtocols The IANA is requested to create a new "CDNI CI/T Playlist Spec MediaProtocols" registry in the "Content Delivery Networks Interconnection (CDNI) Parameters" registry group. The "CDNI CI/T Playlist Spec MediaProtocols" namespace defines the valid trigger targets' extension values in Section 7.5.2, used by the Trigger Spec object. Additions to the "CDNI Playlist Spec MediaProtocols" registry are made via the RFC Required policy as defined in [RFC8126]. The initial contents of the "CDNI CI/T Trigger Extensions" registry comprise the names and descriptions listed in Section 7.5.2, with this document acting as the specification. Sopher, et al. Expires 9 December 2024 [Page 78] Internet-Draft CDN Interconnect Triggers June 2024 11.6. "CDNI CI/T Trigger Extensions" Registry The IANA is requested to create a new "CDNI CI/T Trigger Extensions" registry in the "Content Delivery Networks Interconnection (CDNI) Parameters" registry group. The "CDNI CI/T Trigger Extensions" namespace defines the valid trigger targets' extension values in Section 3.3, used by the Trigger Spec object. Additions to the "CDNI CI/T Trigger Extensions" registry are made via the RFC Required policy as defined in [RFC8126]. The initial contents of the "CDNI CI/T Trigger Extensions" registry comprise the names and descriptions listed in Section 3.3, with this document acting as the specification. 11.7. "CDNI CI/T Error Codes" Registry In [RFC8007] the IANA was requested to create a new "CDNI CI/T Error Codes" registry under the "Content Delivery Network Interconnection (CDNI) Parameters" registry group. Additions to the "CDNI CI/T Error Codes" registry are made via the Specification Required policy as defined in [RFC8126]. The Designated Expert will verify that new Error Code registrations do not duplicate existing Error Code definitions (in name or functionality), prevent gratuitous additions to the namespace, and prevent any additions to the namespace that would impair the interoperability of CDNI implementations. In this second edition of the interface, we list and repeat the definition of the Error Codes from [RFC8007] - acting as the entities specification with no modification compared to [RFC8007]. Additionally, the IANA is requested to register three additional error codes, "espec", "esubject" and "eextension", with specification as defined at Section 6.2.7. 12. Security Considerations The CI/T interface provides a mechanism to allow a uCDN to generate requests into the dCDN and to inspect its own CI/T requests and their current states. The CI/T interface does not allow access to, or modification of, the uCDN or dCDN metadata relating to content delivery or to the content itself. It can only control the presence of that metadata in the dCDN, and the processing work and network utilization involved in ensuring that presence. Sopher, et al. Expires 9 December 2024 [Page 79] Internet-Draft CDN Interconnect Triggers June 2024 By examining "preposition" requests to a dCDN, and correctly interpreting content and metadata URLs, an attacker could learn the uCDN's or content owner's predictions for future content popularity. By examining "invalidate" or "purge" requests, an attacker could learn about changes in the content owner's catalog. By injecting CI/T Commands, an attacker or a misbehaving uCDN would generate work in the dCDN and uCDN as they process those requests. So would a man-in-the-middle attacker modifying valid CI/T Commands generated by the uCDN. In both cases, that would decrease the dCDN's caching efficiency by causing it to unnecessarily acquire or reacquire content metadata and/or content. A dCDN implementation of CI/T MUST restrict the actions of a uCDN to the data corresponding to that uCDN. Failure to do so would allow uCDNs to detrimentally affect each other's efficiency by generating unnecessary acquisition or reacquisition load. An origin that chooses to delegate its delivery to a CDN is trusting that CDN to deliver content on its behalf; the interconnection of CDNs is an extension of that trust to dCDNs. That trust relationship is a commercial arrangement, outside the scope of the CDNI protocols. So, while a malicious CDN could deliberately generate load on a dCDN using the CI/T interface, the protocol does not otherwise attempt to address malicious behavior between interconnected CDNs. 12.1. Authentication, Authorization, Confidentiality, Integrity Protection A CI/T implementation MUST support Transport Layer Security (TLS) transport for HTTP (HTTPS) as per [RFC9110]. TLS MUST be used by the server side (dCDN) and the client side (uCDN) of the CI/T interface, including authentication of the remote end, unless alternate methods are used for ensuring the security of the information in the CI/T interface requests and responses (such as setting up an IPsec tunnel between the two CDNs or using a physically secured internal network between two CDNs that are owned by the same corporate entity). The use of TLS for transport of the CI/T interface allows the dCDN and the uCDN to authenticate each other using TLS client authentication and TLS server authentication. Once the dCDN and the uCDN have mutually authenticated each other, TLS allows: Sopher, et al. Expires 9 December 2024 [Page 80] Internet-Draft CDN Interconnect Triggers June 2024 * The dCDN and the uCDN to authorize each other (to ensure that they are receiving CI/T Commands from, or reporting status to, an authorized CDN). * CDNI commands and responses to be transmitted with confidentiality. * Protection of the integrity of CDNI commands and responses. When TLS is used, the general TLS usage guidance in [RFC9325] MUST be followed. The mechanisms for access control are dCDN-specific and are not standardized as part of this CI/T specification. HTTP requests that attempt to access or operate on CI/T data belonging to another CDN MUST be rejected using, for example, HTTP 403 ("Forbidden") or 404 ("Not Found"). This is intended to prevent unauthorized users from generating unnecessary load in dCDNs or uCDNs due to revalidation, reacquisition, or unnecessary acquisition. When deploying a network of interconnected CDNs, the possible inefficiencies related to the diamond configuration discussed in Section 2.2.1 should be considered. 12.2. Denial of Service This document does not define a specific mechanism to protect against Denial-of-Service (DoS) attacks on the CI/T interface. However, CI/T endpoints can be protected against DoS attacks through the use of TLS transport and/or via mechanisms outside the scope of the CI/T interface, such as firewalling or the use of Virtual Private Networks (VPNs). Depending on the implementation, triggered activity may consume significant processing and bandwidth in the dCDN. A malicious or faulty uCDN could use this to generate unnecessary load in the dCDN. The dCDN should consider mechanisms to avoid overload -- for example, by rate-limiting acceptance or processing of CI/T Commands, or by performing batch processing. 12.3. Privacy The CI/T protocol does not carry any information about individual end users of a CDN; there are no privacy concerns for end users. Sopher, et al. Expires 9 December 2024 [Page 81] Internet-Draft CDN Interconnect Triggers June 2024 The CI/T protocol does carry information that could be considered commercially sensitive by CDN operators and content owners. The use of mutually authenticated TLS to establish a secure session for the transport of CI/T data, as discussed in Section 12.1, provides confidentiality while the CI/T data is in transit and prevents parties other than the authorized dCDN from gaining access to that data. The dCDN MUST ensure that it only exposes CI/T data related to a uCDN to clients it has authenticated as belonging to that uCDN. 13. References 13.1. Normative References [RFC1930] Hawkinson, J. and T. Bates, "Guidelines for creation, selection, and registration of an Autonomous System (AS)", BCP 6, RFC 1930, DOI 10.17487/RFC1930, March 1996, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC3339] Klyne, G. and C. Newman, "Date and Time on the Internet: Timestamps", RFC 3339, DOI 10.17487/RFC3339, July 2002, . [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, January 2005, . [RFC8006] Niven-Jenkins, B., Murray, R., Caulfield, M., and K. Ma, "Content Delivery Network Interconnection (CDNI) Metadata", RFC 8006, DOI 10.17487/RFC8006, December 2016, . [RFC8007] Murray, R. and B. Niven-Jenkins, "Content Delivery Network Interconnection (CDNI) Control Interface / Triggers", RFC 8007, DOI 10.17487/RFC8007, December 2016, . [RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 8126, DOI 10.17487/RFC8126, June 2017, . Sopher, et al. Expires 9 December 2024 [Page 82] Internet-Draft CDN Interconnect Triggers June 2024 [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data Interchange Format", STD 90, RFC 8259, DOI 10.17487/RFC8259, December 2017, . [RFC9110] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "HTTP Semantics", STD 97, RFC 9110, DOI 10.17487/RFC9110, June 2022, . [RFC9112] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "HTTP/1.1", STD 99, RFC 9112, DOI 10.17487/RFC9112, June 2022, . [RFC9325] Sheffer, Y., Saint-Andre, P., and T. Fossati, "Recommendations for Secure Use of Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS)", BCP 195, RFC 9325, DOI 10.17487/RFC9325, November 2022, . 13.2. Informative References [ISO8601] ISO, "Data elements and interchange formats -- Information interchange -- Representation of dates and times", ISO 8601:2004, Edition 3, December 2004, . [MPEG-DASH] ISO, "Information technology -- Dynamic adaptive streaming over HTTP (DASH) -- Part 1: Media presentation description and segment format", ISO/IEC 23009-1:2014, Edition 2, May 2014, . [MSS] Microsoft, "[MS-SSTR]: Smooth Streaming Protocol", Protocol Revision 8.0, September 2017, . [POSIX.1] "The Open Group Base Specifications Issue 7", IEEE Std 1003.1 2018 Edition, 31 January 2018, . Sopher, et al. Expires 9 December 2024 [Page 83] Internet-Draft CDN Interconnect Triggers June 2024 [RFC6707] Niven-Jenkins, B., Le Faucheur, F., and N. Bitar, "Content Distribution Network Interconnection (CDNI) Problem Statement", RFC 6707, DOI 10.17487/RFC6707, September 2012, . [RFC7336] Peterson, L., Davie, B., and R. van Brandenburg, Ed., "Framework for Content Distribution Network Interconnection (CDNI)", RFC 7336, DOI 10.17487/RFC7336, August 2014, . [RFC7337] Leung, K., Ed. and Y. Lee, Ed., "Content Distribution Network Interconnection (CDNI) Requirements", RFC 7337, DOI 10.17487/RFC7337, August 2014, . [RFC7736] Ma, K., "Content Delivery Network Interconnection (CDNI) Media Type Registration", RFC 7736, DOI 10.17487/RFC7736, December 2015, . [RFC7975] Niven-Jenkins, B., Ed. and R. van Brandenburg, Ed., "Request Routing Redirection Interface for Content Delivery Network (CDN) Interconnection", RFC 7975, DOI 10.17487/RFC7975, October 2016, . [RFC8216] Pantos, R., Ed. and W. May, "HTTP Live Streaming", RFC 8216, DOI 10.17487/RFC8216, August 2017, . Acknowledgments The authors thank Kevin Ma for his input, and Carsten Bormann for his review and formalization of the JSON data. Authors' Addresses Nir B. Sopher Qwilt 6, Ha'harash Hod HaSharon 4524079 Israel Email: nir@apache.org Sopher, et al. Expires 9 December 2024 [Page 84] Internet-Draft CDN Interconnect Triggers June 2024 Ori Finkelman Qwilt 6, Ha'harash Hod HaSharon 4524079 Israel Email: ori.finkelman.ietf@gmail.com Sanjay Mishra Verizon 13100 Columbia Pike Silver Spring, MD 20904 United States of America Email: sanjay.mishra@verizon.com Jay K. Robertson Qwilt 275 Shoreline Dr Ste 510 Redwood City, CA 94065 United States of America Email: jayrobertson@acm.org Sopher, et al. Expires 9 December 2024 [Page 85]